VERSA CRIMP-CONNECTORS 350 MCM
Manufacturer Resources
Product Specs
- Connection Type:
- Compression
- Country Of Origin:
- United States (US)
- Insulation Material:
- None
- Product Group:
- Wire & Cable Management
- Product Type:
- Compression Splice Service Entrance Insulated
- Selling Unit Of Measure:
- each
- Type2:
- Wire or cable compression splice
- Department:
- Electrical
- Product Subgroup:
- Splices
- Product Size:
- 9-1/2 inches long
Blackburn AAC 350 FT – Frequently Asked Questions
1) What conductor size does the Blackburn AAC 350 FT splice take?
The Blackburn AAC 350 FT is sized for 350 MCM conductor. It is a compression splice, so both ends are crimped onto 350 MCM cable with a die-matched tool, not bolted or set-screwed.
2) Does the AAC 350 FT compression splice come insulated, or do I have to cover it?
It ships bare. Insulation material is listed as none, so the crimped joint has to be insulated in the field, typically with heat shrink tubing or tape rated for the circuit voltage.
3) How long is the Blackburn AAC 350 FT splice barrel, and will it fit in my enclosure?
The AAC 350 FT measures 9-1/2 inches long overall. That is a long butt splice, so check the clear straight run inside your pull box, gutter, or meter socket before you commit, plus room for the crimp tool head at each end.
4) Is the AAC 350 FT a full-tension splice for overhead conductor or just a service entrance connector?
It is a wire or cable compression splice catalogued for service entrance work in 350 MCM. Use it to join conductor runs where a crimped butt connection is acceptable; for overhead full-tension automatic splicing on transmission spans, that is a different class of product.
5) Do I get one splice or a pack when I order the Blackburn AAC 350 FT?
Sold each. One order line gets you a single 350 MCM compression splice, so count your joints, two conductors per splice, and order accordingly.
6) Is the Blackburn AAC 350 FT made in the USA for a government or public works spec?
Country of origin is the United States, which is what a municipal, federal, or institutional buyer working to a domestic-content requirement needs on the submittal.
7) What tooling do I need to install a 350 MCM Versa Crimp connector?
Because this is a compression connector rather than a mechanical one, you need a hydraulic or battery crimper with the die that matches 350 MCM on this barrel. No set screws, no wrench, and the joint cannot be undone once crimped, so strip length and conductor seating matter on the first try.
8) What part number do I quote for the Blackburn 350 MCM Versa Crimp splice?
Order it as Blackburn AAC 350 FT. That is the manufacturer part number for the 350 MCM Versa Crimp compression splice.
How fast can I get the Blackburn AAC 350 FT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn AAC 350 FT come with a warranty?
Absolutely. The Blackburn AAC 350 FT is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn AAC 350 FT?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn AAC 350 FT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.