You may also like
AL SERVENTR COMP SPLICE 4 8 GRN PLG
Manufacturer Resources
Product Specs
- Connection Type:
- Compression
- Country Of Origin:
- United States (US)
- Insulation Material:
- Yes
- Number Of Conductors:
- 2
- Product Group:
- Wire Connectors & Terminals
- Product Type:
- Compression Splice
- Selling Unit Of Measure:
- each
- Standards:
- ANSI C119.4
- Surface Finishing:
- Nylon Sleeve
- Type2:
- Wire connectors
- Department:
- Electrical
- Product Subgroup:
- Wire Connectors
- Product Size:
- 2-3/4 inch long
Blackburn UOG 48 SP – Frequently Asked Questions
1) What is the Blackburn UOG 48 SP used for on a service entrance?
The UOG 48 SP is an aluminum compression splice for service entrance work, made to join two conductors in a single compression connection. It is a two-conductor splice, so it takes one run in each end and is crimped, not bolted or set-screwed.
2) Does the Blackburn UOG 48 SP splice come insulated, or do I have to tape and seal it myself?
It comes with a nylon sleeve over the barrel, so the splice is insulated as supplied rather than being a bare barrel you have to build up with tape or heat shrink.
3) Is the Blackburn UOG 48 SP a set-screw connector or does it need a crimp tool?
It is a compression connector, so it needs a hydraulic or battery crimp tool with the correct die. There are no set screws, and it cannot be made up with a wrench. If your crew is not carrying a compression tool on the truck, specify a mechanical set-screw splice instead.
4) Does the Blackburn UOG 48 SP meet ANSI C119.4 for underground and service connectors?
Yes. The splice is built to ANSI C119.4, the standard covering connectors for use between aluminum and copper conductors. That is the reference an inspector or spec writer usually looks for on a service entrance splice.
5) How long is the Blackburn UOG 48 SP splice barrel?
It measures 2-3/4 inches long overall. Worth checking against the space you have inside a meter can or gutter before you commit, since a compression splice needs room for the tool head as well as the body.
6) What part number should I order for the Blackburn aluminum service entrance compression splice with the green plug?
Order Blackburn UOG 48 SP. That is the manufacturer part number for the aluminum service entrance compression splice with the green identification plug.
7) Is the Blackburn UOG 48 SP sold in bags or individually?
It is sold each, so quantity ordered equals splices received. Order one per conductor you are splicing, not one per service.
8) Is the Blackburn UOG 48 SP made in the USA?
Yes, country of origin is the United States. That matters on public and institutional jobs carrying domestic sourcing requirements.
How fast can I get the Blackburn UOG 48 SP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn UOG 48 SP come with a warranty?
Absolutely. The Blackburn UOG 48 SP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn UOG 48 SP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn UOG 48 SP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.