You may also like
Bobrick B-1002039 O/S Door Hardware, Zamak, 1540
Use this OEM Out-Swing Door Hardware Kit (1002039), from Bobrick, to repair ClassicSeries out-swing doors. Components feature cast Zamak construction with a chrome-plated finish to coordinate with other Bobrick ClassicSeries toilet partition hardware.
- (1) Full Notch Flange
- (1) Half Notch Flange
- (1) Upper Hinge Bracket
- (1) Lower Hinge Bracket (with Cam Assembly)
- (1) Hinge Pin
- (1) Surface-Mount Latch
- (1) Keeper and Doorstop
- (1) Coat Hook (Two Tier, No Bumper)
- (2) Door Handles
- (6) Pairs of 15/16″ Shoulder Screws and 5/8″ Barrel Nuts
- (2) #10 x 1″ (4.8 x 25mm) Flat Head Phillips Screws (for Door Flanges)
- (2) Pairs of One-Way Screws and Threaded Sleeves
- (2) Pan Head One-Way Screws
- (4) #8-32 x 1-1/4″ One-Way Screws (for Door Handles)
- When properly installed and adjusted, the design of the ClassicSeries 1540 latch, keeper, and hinges allow emergency entry to stalls by lifting the door. The cam assembly, integrated into the lower hinge, makes it possible to adjust the door’s neutral position.
Manufacturer Resources
Product Specs
- Product Type:
- Out-Swing Door Hardware Kit
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Parts and Accessories
- Department:
- Plumbing
- Parts and Accessories Type:
- Mounting Hardware
- Application:
- Toilet
Bobrick 1002039 – Frequently Asked Questions
1) Does the Bobrick 1002039 hardware kit work on in-swing toilet partition doors?
No. The 1002039 kit is built for out-swing ClassicSeries doors only. The hinge brackets, surface-mount latch, and keeper/doorstop are all oriented for a door that swings out of the compartment, so an in-swing stall needs the in-swing version of the hardware instead.
2) What exactly comes in the Bobrick B-1002039 out-swing door hardware kit?
It is a complete single-door set: one full notch flange, one half notch flange, upper hinge bracket, lower hinge bracket with cam assembly, hinge pin, surface-mount latch, keeper and doorstop, a two-tier coat hook (no bumper), and two door handles. Fasteners are included too, six pairs of 15/16 inch shoulder screws with 5/8 inch barrel nuts, two #10 x 1 inch flat head Phillips screws for the door flanges, two pairs of one-way screws with threaded sleeves, two pan head one-way screws, and four #8-32 x 1-1/4 inch one-way screws for the handles.
3) Will this hardware let staff get into a locked stall in an emergency?
Yes. When the ClassicSeries 1540 latch, keeper and hinges in this kit are installed and adjusted properly, the door can be lifted to allow emergency entry into the compartment without dismantling the latch. That behavior depends on correct adjustment, so set the hinges before signing off the install.
4) My stall door doesn't sit in the right rest position. Does this kit fix that?
The lower hinge bracket in the 1002039 kit includes a cam assembly, and that cam is what sets the door's neutral position. If a door is drifting shut or hanging open when it should rest partly open, replacing the lower hinge with this bracket and adjusting the cam corrects it.
5) Is this Bobrick kit genuine OEM hardware or an aftermarket copy?
It is OEM Bobrick hardware, part 1002039, for repairing ClassicSeries out-swing partition doors. The cast Zamak components carry a chrome-plated finish so a repaired door matches the latches, hinges and hooks already on the rest of the ClassicSeries partitions in the restroom.
6) Is the Bobrick 1002039 kit enough hardware for one stall door or several?
One door. The kit carries a single latch, a single keeper and doorstop, one hinge pin, one upper and one lower hinge bracket, and one pair of handles. If you're refitting a row of compartments, order one kit per door.
7) Do I need to buy screws separately to mount this partition door hardware?
No separate fasteners are needed. Mounting hardware is part of the kit, including the shoulder screws and barrel nuts, the #10 x 1 inch flat head Phillips screws for the door flanges, and the tamper-resistant one-way screws for the handles and latch components.
8) Does this Bobrick kit include a coat hook and bumper for the stall door?
A two-tier coat hook is included, but it is the version without a bumper. If the doors in your restroom use a combination hook and rubber bumper to stop the door against the pilaster, that bumper style hook is a separate item; the doorstop function in this kit is handled by the keeper and doorstop piece.
9) Will chrome-plated Zamak hardware hold up in a high-traffic public restroom?
The components are cast Zamak with chrome plating, the same material and finish Bobrick uses across ClassicSeries toilet partition hardware, so it stands up to the wet, frequently cleaned conditions of a public washroom and matches surrounding hardware visually. For facilities standardizing a whole building, using the OEM 1002039 kit keeps every compartment on the same latch and hinge design.
How fast can I get the Bobrick 1002039 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 1002039 come with a warranty?
Absolutely. The Bobrick 1002039 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 1002039?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 1002039 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.