You may also like
Bobrick B-1002394 Inline Alcove Panel Packet, Zamak, 1540
Model: BOB-B-1002394
Bobrick B-1002394 Chrome Alcove Panel Bracket PacketBobrick 1002394 Chrome Alcove Panel Bracket PacketBobrick 1002394 replacement chrome-plated zamak alcove panel bracket packet.Packet consists of...
Bobrick
$134.29
$109.29
Bobrick B-1002144 Keeper O/S Alcove Assy (1540
- Bobrick 1002144 Chrome Keeper for Outswing Alcove Door
- Chrome Hardware for Bobrick Toilet Partitions:
ClassicSeries® 1540 - Bobrick 1002144 replacement chrome keeper for outswing, alcove, toilet partition door.
Keeper includes mounting screws. - Door and Mounting Hardware - Hinges, door latches, door keepers, coat hooks, and mounting brackets are constructed of chrome-plated zamak. Toilet compartment door is locked from inside by sliding door latch into keeper. A locked compartment may be opened from outside by lifting door to disengage latch from keeper. Doorstop prevents inswing door from swinging out beyond stile; on outswing door, the doorstop/keeper prevents it from swinging in beyond stile. Combination coat hook and bumper reduces damage from door inside compartment.
Manufacturer Resources
Product Specs
- Product Type:
- Keeper O/S Alcove Assy
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Parts and Accessories
- Department:
- Plumbing
- Parts and Accessories Type:
- Mounting Hardware
- Application:
- Toilet
Bobrick 1002144 – Frequently Asked Questions
1) Will the Bobrick 1002144 keeper work on an inswing toilet partition door?
No. The 1002144 is built as a doorstop/keeper for an OUTSWING door in an alcove partition layout, where the doorstop side keeps the door from swinging in past the stile. An inswing door needs the inswing doorstop/keeper instead, which stops the door from swinging out beyond the stile. Ordering the outswing part for an inswing opening leaves the latch and stop geometry wrong.
2) How does the keeper work with the sliding latch on a Bobrick compartment door?
The occupant locks the compartment by sliding the door latch into the keeper mounted on the stile. From outside, the compartment can be opened in an emergency by lifting the door, which disengages the latch from the keeper. That lift-to-release action only works if the keeper is the correct one for the door swing, which is why the outswing alcove version is a distinct part.
3) My stall latch won't hold because the keeper is broken. Is this the part I replace?
Yes, if the compartment is a Bobrick ClassicSeries 1540 with an outswing door in an alcove. The 1002144 is sold as the replacement chrome keeper for exactly that condition, and it mounts to the stile so the sliding latch has something to engage. If the latch itself is bent or the hinge is sagging, you'll need those parts separately, as this is the keeper only.
4) Do I get the screws with this Bobrick keeper, or do I need to buy mounting hardware separately?
Mounting screws are included with the 1002144 keeper assembly, so no separate fasteners are needed for a straight replacement into the existing stile holes.
5) What is the Bobrick 1002144 keeper made of, and will it hold up in a high traffic restroom?
Chrome-plated Zamak, the same material Bobrick uses across its partition hinges, latches, keepers, coat hooks and mounting brackets. Cast Zamak with chrome plating is the standard partition hardware material for commercial washrooms and matches the finish of the rest of the ClassicSeries 1540 hardware, so a single replacement won't look off against the other compartments.
6) I'm standardizing restroom hardware across a building. Can one keeper part number cover all my Bobrick stalls?
Not usually. Bobrick partition keepers are specific to door swing and compartment layout, so an outswing alcove compartment takes the 1002144 while inswing doors and non-alcove layouts take different keeper/doorstop parts. Walk the building, note swing direction and whether each compartment is alcove or between-pilaster, then stock the matching keeper for each condition. All of the ClassicSeries 1540 door hardware shares the chrome-plated Zamak finish, so mixing part numbers still looks consistent.
How fast can I get the Bobrick 1002144 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 1002144 come with a warranty?
Absolutely. The Bobrick 1002144 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 1002144?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 1002144 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.