Bobrick B-1002377 Headrail, 120", 1542 Series, Raw

It's the overhead headrail for Bobrick 1542 Series toilet compartments, the horizontal channel that runs across the top of the pilasters to brace them and carry the door hardware. Bobrick sells it as a repair part, so it's what you order when the existing rail on a 1542 Series stall is bent, corroded, or damaged rather than replacing the whole compartment.

Bobrick lists the B-1002377 specifically as a 1542 Series part. Headrail profiles differ between compartment series and manufacturers, so match the series stamped on your existing hardware before ordering rather than assuming any overhead-braced stall takes the same rail.

Raw means it ships unfinished, without an applied anodized or painted finish. If the other headrails in the restroom are a finished anodized aluminum, a raw rail will not visually match straight out of the box, so it is best used where it is being finished, where appearance is not a concern, or where the whole run is being replaced.

What ships is the headrail itself, sold as a single repair part. Pilaster caps, wall brackets, and anchors are separate items, so if yours are damaged or missing after removing the old rail, order them alongside it so the crew isn't stopped mid-install.

It is overhead-braced hardware. A headrail runs continuously along the tops of the pilasters, which is what stiffens a floor-mounted, overhead-braced compartment. Ceiling-hung and floor-to-ceiling layouts don't use this rail, so if your pilasters run all the way to the structure above, this is not the part.

The 120 inch raw rail is the practical stocking length for 1542 Series repairs, since it can be cut down to shorter runs on site. Keep in mind it is raw, so plan for finishing if the restrooms being served have anodized rails on the remaining stalls.