You may also like
Bobrick B-1002385 Extruded Aluminum Headrail
- Bobrick’s extruded aluminum headrail offers support and reinforcement to overhead braced and floor mounted high pressure laminate (HPL) partition layouts. It comes in an 84″ standard length that can be trimmed to the size you need. It’s grip resistant design prevents users from hanging by it, helping to avoid damage to the bathroom and injury to the user. Mounting brackets and headrail endcaps used for the installation of the headrail are sold separately.
- Used with overhead braced toilet partition layouts
- Extruded aluminum construction comes in a standard 84″ length
- Manufactured by Bobrick
- Face of the headrail has raised grip-resistant edge.
Manufacturer Resources
Product Specs
- Product Type:
- Headrail
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Parts and Accessories
- Department:
- Plumbing
- Parts and Accessories Type:
- Partition Hardware
- Application:
- Washroom Accessory
Bobrick 1002385 – Frequently Asked Questions
1) Can the Bobrick B-1002385 84 inch headrail be cut down to fit a shorter partition run?
Yes. The B-1002385 ships as a standard 84 inch extruded aluminum length and is meant to be trimmed on site to the run you need. That is the normal way it gets installed, so order the 84 inch stock and cut to your layout dimension.
2) Do I need anything else to install a Bobrick headrail, or does it come with brackets?
Brackets and end caps are not included. The headrail is just the extruded aluminum rail, so you also need Bobrick headrail mounting brackets and headrail end caps, both ordered separately. Count your brackets off the partition layout (each panel-to-pilaster connection point) and one end cap per exposed rail end before you place the order.
3) Will this Bobrick headrail work with floor mounted overhead braced toilet partitions?
That is exactly what it is for. The B-1002385 reinforces overhead braced and floor mounted high pressure laminate (HPL) partition layouts, tying the pilasters together across the top of the run. If your stalls are floor to ceiling, ceiling hung, or floor mounted with no overhead bracing, there is no headrail in that layout and this part does not apply.
4) What does the grip-resistant edge on a toilet partition headrail actually do?
The face of the Bobrick headrail carries a raised grip-resistant edge so a user cannot get a hand around it and hang from the rail. In high traffic restrooms that is the failure mode that bends rails and pulls brackets out of pilasters, so it is a real durability item for schools, stadiums, and other public facilities rather than a styling detail.
5) Is the B-1002385 the right part if my restroom partitions are a different brand?
Headrail, bracket, and pilaster prep are matched systems, and the B-1002385 is a Bobrick rail sized to Bobrick brackets and end caps. It is the correct replacement for a Bobrick overhead braced HPL layout. If your stalls are another manufacturer, match the rail to that maker's bracket rather than mixing, since the bracket has to seat in the extrusion profile.
6) I am replacing one damaged headrail in a bank of stalls. Do I order this by the stall or by the run?
Order by the run, not by the stall. One 84 inch B-1002385 rail is cut to span the pilasters in a continuous run, so a damaged rail is replaced as a whole length. If your run is longer than 84 inches you need more than one length plus the brackets to land them, and the brackets and end caps are separate line items.
7) Is this an aluminum or a stainless headrail, and will it hold up in a wet restroom?
It is extruded aluminum. Aluminum is the standard headrail material for HPL overhead braced partitions because it will not rust in a humid washroom environment and the extrusion carries the span between pilasters without adding much weight to the run.
How fast can I get the Bobrick 1002385 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 1002385 come with a warranty?
Absolutely. The Bobrick 1002385 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 1002385?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 1002385 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.