You may also like
Bobrick Torx Screw 12 X 34 Sheet Metal
Manufacturer Resources
Product Specs
- Product Type:
- Torx Screw
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Parts and Accessories
- Department:
- Plumbing
- Parts and Accessories Type:
- Fastener
Bobrick 1002500 – Frequently Asked Questions
1) What sizes does the Bobrick B-1002500 Torx screw come in?
Three sizes are offered: a #12 x 3/4 inch, a #12 x 2 inch, and a 1/4-20 x 1/2 inch machine thread. The two #12 options are sheet metal thread; the 1/4-20 is a machine screw thread, so pick based on what you are threading into.
2) What driver do I need to install these Bobrick washroom accessory screws?
They are Torx drive, so a Torx bit is required. A Phillips or flat blade will not seat in the head. Bobrick uses Torx on washroom accessory fasteners to keep the hardware tamper resistant in public restrooms, so keep the matching bit on the truck before you pull a dispenser or grab bar off the wall.
3) Which one do I order for anchoring a Bobrick accessory into a metal stud or the sheet metal body of a cabinet?
Use one of the #12 sheet metal versions. Sheet metal thread cuts and holds in thin metal without a nut behind it. The 3/4 inch length suits fastening straight to the panel or stud face; the 2 inch length gives you reach through tile, backer, or a thicker buildup before the screw bites metal.
4) When should I use the 1/4-20 x 1/2 inch instead of the #12 sheet metal screw?
Pick the 1/4-20 x 1/2 inch when the screw threads into an existing tapped hole or a nut on the accessory itself, which is common on mounting brackets and internal assemblies. It will not hold in bare sheet metal the way the #12 sheet metal thread does. At 1/2 inch it is a short fastener, meant for machine thread engagement rather than wall anchoring.
5) Is the Bobrick B-1002500 a replacement fastener for existing Bobrick washroom accessories?
Yes, it is a Bobrick replacement fastener for washroom and bath accessories, so it is the part to order when the original Torx screw on a dispenser, grab bar mount, or partition accessory is missing or stripped. Match the size to what came out: #12 x 3/4 inch, #12 x 2 inch, or 1/4-20 x 1/2 inch.
6) Can I standardize on one Torx screw size across a facility's Bobrick restroom hardware?
Not reliably on one size alone. Bobrick accessories use both sheet metal and machine thread fasteners depending on the mount, which is why three sizes are offered. For a maintenance stock, carrying the #12 x 3/4 inch for surface mounting, the #12 x 2 inch for deeper substrates, and the 1/4-20 x 1/2 inch for tapped brackets covers the common cases, plus one Torx bit for all of them.
How fast can I get the Bobrick 1002500 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 1002500 come with a warranty?
Absolutely. The Bobrick 1002500 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 1002500?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 1002500 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.