Bobrick B-2013 - Automatic Wal...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$336.90
$265.64
Bobrick B-2013 - Automatic Wall Mounted Foam Soap Dispenser

Bobrick B-2013 - Automatic Wall Mounted Foam Soap Dispenser

(No reviews yet) Write a Review

Model: B-2013
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$336.90
$265.64
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bobrick B-2013 Automatic Wall Mounted Foam Soap Dispenser

Automatic wall-mounted soap dispenser shall be Type-304 stainless steel with satin finish. Corrosion-resistant valve shall dispense a variety of foam soaps, iodine-based foam soaps, and alcohol-based foam hand sanitizers. Note foam quality may vary when used with foam hand sanitizer. Valve shall be sensor-activated and not require contact with the dispenser to function. Lockable housing shall be equipped with a clear acrylic refill-indicator window and be hinged for refilling and maintenance. Container shall have a capacity of 800 ml (27-fl oz). Unit shall have CE Certification.

Features

  • Stainless steel, satin finish
  • Surface Mount
  • 4-1/4″ W x 10-17/32″ H x 4-7/32″ D
  • 27-fl oz. capacity
  • Suitable for a variety of foaming soaps

Product Specs

  • Product Type : Soap Dispenser, Hand Sanitizer Dispenser
  • Finish : Satin
  • Material : Stainless Steel
  • Mounting Type : Wall Mounted
  • Mounting Options : Surface Mounted
  • Operation : Automatic
  • Dispense Type : Foam Soap, Foam Sanitizer
  • Capacity : 27-fl oz (800ml)
  • Features : Low Soap Indicator, Low Battery Indicator
  • Accessibility : ADA Compliant

Product Specs

Product Group:
Washroom/Bath Accessories
Product Subgroup:
Soap Dispensers
Product Type:
Soap Dispenser
Commercial/Residential:
Residential
Product Category:
Washroom/Bath Accessories
Department:
Plumbing

Bobrick B-2013 – Frequently Asked Questions

1) Will the Bobrick B-2013 dispense liquid soap, or is it foam only?
Foam only. The B-2013 valve is built for foam soaps, iodine-based foam soaps, and alcohol-based foam hand sanitizers. Pour liquid soap into it and it will not dispense correctly. Bobrick also notes foam quality can vary when the unit is filled with foam hand sanitizer rather than foam soap.
2) Does the Bobrick B-2013 meet ADA requirements?
The B-2013 is listed as ADA compliant, and it carries CE Certification. Mounting height is still on you: ADA reach range is set by where you fix the unit on the wall, not by the dispenser itself, so follow the mounting dimensions in the Bobrick installation instructions for the opening.
3) Is the Bobrick B-2013 touchless?
Yes, it is sensor activated. The valve dispenses without any contact with the housing, which is why it gets specified in healthcare, food service, and high traffic public restrooms where cross contamination is the concern.
4) How do I know when the Bobrick B-2013 needs a refill or new batteries?
Two indicators handle that. The lockable housing has a clear acrylic refill-indicator window so a custodian can read the soap level at a glance without opening the unit, and there is a low battery indicator as well. Housekeeping can walk a run of restrooms and only open the ones that need service.
5) How much soap does the Bobrick B-2013 hold between refills?
The container holds 800 ml, which is 27 fluid ounces. That is the figure to use when you are sizing a refill schedule across a floor or a building.
6) Will the Bobrick B-2013 hold up in a high traffic public restroom?
The body is Type-304 stainless steel with a satin finish and the valve is corrosion resistant, which is why this construction gets used in commercial washrooms. The housing locks and is hinged for refilling, so it opens only with the key and not to a guest pulling at it. Satin stainless is also easier to keep looking clean than a polished finish under constant use.
7) Where can I get the mounting dimensions and rough-in for the B-2013 before I set my blocking?
Bobrick publishes both an installation instruction sheet and a technical data sheet for the B-2013, and both are available with the product. Pull the technical data sheet for the mounting pattern and overall dimensions before you frame blocking or drill tile, since this is a surface mounted unit fastened to the finished wall.
8) What finish does the Bobrick B-2013 come in?
One finish only, satin stainless steel. There is no polished or painted option in this model, so if you are matching a washroom package of Bobrick grab bars, paper dispensers and mirrors, satin stainless is what it will sit next to.
How fast can I get the Bobrick B-2013 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick B-2013 come with a warranty?
Absolutely. The Bobrick B-2013 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick B-2013?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bobrick B-2013 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!