You may also like
Bobrick B-2112 Surface-Mounted Soap Dispenser
Horizontal tank is satin-finish stainless steel. Valve dispenses all-purpose hand soaps. Capacity: 40-fl oz (1.2-L). Soap refill window. Concealed wall fastening. Hinged filler-top requires special key to open. Vandal resistant. Unit 8 1/8″ W, 4 3/4″ H (205 x 120mm); wall to push-button, 3 1/2″ (90mm).
Features
- Stainless steel, satin finish
- Surface Mount
- 8-1/8″ W x 4-3/4″ H x 3-1/2″ D
- 40 fl. oz. capacity
- Easy to view refill window
Product Specs
- Product Type : Soap Dispenser
- Finish : Satin
- Material : Stainless Steel
- Mounting Type : Wall Mounted
- Mounting Options : Surface Mounted
- Operation : Manual
- Dispense Type : Liquid Soap
- Capacity : 40-fl oz (1.2-L)
- Features : Top Fill, Low Soap Indicator
- Accessibility : ADA Compliant
Resources
Manufacturer Resources
Product Specs
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Soap Dispensers
- Product Type:
- Soap Dispenser
- Commercial/Residential:
- Residential
- Product Category:
- Washroom/Bath Accessories
- Department:
- Plumbing
Bobrick 2112 – Frequently Asked Questions
1) How much soap does the Bobrick B-2112 hold, and how do you refill it?
Capacity is 40 fluid ounces (1.2 L) of all-purpose liquid hand soap. Refilling is top fill: the hinged filler top swings open and you pour bulk soap straight into the horizontal tank, so there are no proprietary cartridges to buy. A refill window on the tank lets housekeeping see the soap level at a glance instead of opening every unit on a round.
2) Is the Bobrick B-2112 secure enough for a public or high-traffic restroom?
It is built for it. The hinged filler top requires a special key to open, so the tank cannot be topped with the wrong chemical or emptied by the public, and the unit is described as vandal resistant. The tank is stainless steel rather than plastic, and the wall fastening is concealed so there are no exposed screws to attack. Keep the key with the janitorial staff, since that key is what gets you into the unit for every refill.
3) Does the B-2112 dispenser meet ADA requirements?
The B-2112 is listed as ADA compliant, and it is a manual push-button valve, so no tight grasping or twisting is needed to operate it. The rest is down to your install: mount it so the push button falls within the reach range required for the fixture it serves, and watch the 3-1/2 inch projection where the unit sits in a circulation path.
4) Can I use foam soap or hand sanitizer in the Bobrick B-2112?
No. The valve on the B-2112 dispenses all-purpose liquid hand soaps, and that is what the unit is built around. Foaming soap and gel sanitizer need a pump matched to that product. If your building standardizes on foam, specify a foam-valve dispenser instead rather than filling this tank with the wrong formula.
5) Will a surface-mounted soap dispenser like the B-2112 work on a tiled or block restroom wall?
Yes. Surface mounting is the right choice when you cannot cut into the wall, which covers tile over block, concrete, and existing finished walls. The B-2112 hangs on the face of the wall with concealed fastening, so no fasteners show and there is no recessed cavity to frame. If the wall is a stud partition you can still use it; a recessed dispenser is the alternative only when you need the unit flush and have depth to give.
6) Does the B-2112 need batteries or power at the wall?
No power, no batteries, no rough-in. Operation is manual, pushed by hand at the button, so the only thing the installer needs is the wall fastening. That makes it a straightforward swap into an existing restroom where there is no outlet near the lavatory and no appetite for running one.
7) Will the satin stainless B-2112 match the other Bobrick washroom accessories in my restrooms?
The tank is satin-finish stainless steel, which is the standard commercial washroom finish and the same look carried across most grab bars, paper dispensers, and waste receptacles. If your existing trim is satin stainless, this drops in visually. If you have gone bright polished or a painted finish elsewhere, it will read differently. Satin is the only finish the B-2112 comes in.
8) How do I know when the Bobrick B-2112 needs refilling without opening it?
There is a soap refill window on the horizontal tank that acts as a low soap indicator. Staff can read the level from the floor on a walkthrough, which matters when you are servicing dozens of restrooms on a route and do not want to unlock 40 dispensers to find the three that are empty.
How fast can I get the Bobrick 2112 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 2112 come with a warranty?
Absolutely. The Bobrick 2112 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 2112?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 2112 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.