You may also like
Bobrick B-232x24 Hat and Coat Hook Strip
Type 304 stainless steel, satin finish. Hooks are 1″ W, 6 1/2″ H (25 x 165mm); project 2 1/4″ (55mm) from wall. Mounting strip is 4″ (100mm) high and has 1/4″ (6mm) return.
Features
- Stainless steel, satin finish
- Surface mounted
- 24″ L x 6-1/2″ H x 2-1/4″ D
- 3 hooks 1″ wide
- Hooks project 2-1/4″ from the wall
Product Specs
- Product Categories : Hooks
- Finish : Satin-Finish Stainless Steel
- Accessibility : ADA Compliant
Resources
Manufacturer Resources
Product Specs
- Features:
- ADA Compliant
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Clothes Hooks
- Product Category:
- Hooks
- Department:
- Plumbing
Bobrick 232x24 – Frequently Asked Questions
1) How far does the Bobrick B-232 hook strip stick out into the room?
Hooks project 2-1/4 inches (55mm) from the wall face. That matters in a narrow toilet compartment or a tight corridor where clearance is being checked against the door swing or the required clear floor path, so measure the space before mounting.
2) Will a stainless coat hook strip hold up in a locker room or a public restroom?
The B-232 strip is Type 304 stainless steel in a satin finish, which is the standard material for wet, high traffic washrooms and locker rooms because it resists corrosion and hides wear and fingerprints better than a bright polish. Satin is the only finish this model comes in.
3) Does the Bobrick B-232 mount into the wall or on the surface?
It is surface mounted. The 4 inch high mounting strip fastens flat to the finished wall with a 1/4 inch return at the edge, so there is no wall cut-in or recess required, which is why it works on tile, block, and existing partition walls in a retrofit.
4) I need hooks for a row of shower stalls, is one strip or several single hooks better?
A three hook strip like the B-232x24 puts all three hooks on one continuous 24 inch backplate, so you drill and align once instead of three times, and the spacing stays consistent across a wall. Single hooks are the better call when the hooks need to land in separate stalls or at different heights, since the strip commits all three to one line.
5) Will the Bobrick B-232 match other satin stainless washroom accessories already installed?
It is satin finish Type 304 stainless, the same finish family used across most commercial washroom accessory lines, so it reads consistently alongside satin stainless grab bars, paper dispensers, and mirrors. If the existing fittings are polished chrome or bright stainless, the satin will look noticeably duller next to them.
How fast can I get the Bobrick 232x24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 232x24 come with a warranty?
Absolutely. The Bobrick 232x24 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 232x24?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 232x24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.