You may also like
Bobrick B-39003-31 Waste Receptacle Container - For B-39003
Model: BOB-B-39003-31
Bobrick 39003-31 Plastic Waste Receptacle Container for the 39003 Model (info below)
Satin-finish stainless steel*. Built in TowelMate®. Tumbler locks flush with the door – no protrusion. Door has...
Bobrick
$117.06
$92.06
Bobrick B-39003-130 TowelMate
TowelMate reduces towel usage up to 20%. Eliminates the dispensing of handfuls of towels with the “Perfect Pull Rod” separating and dispensing one towel at a time.
Field installation into existing cabinets without tools. Easy-load channel/retainer saves time. US EPA Reduce & Reuse Resource Conservation Initiative compliance. Fabricated of 50%-70% recycled stainless steel.
Available as an optional accessory for TrimLineSeries B-39003.
Features
- TowelMate Accessory module shall be Type-304 stainless steel with 2B finish.
- Black nylon support rod, 3/8" (10mm) diameter, fastened to module with stainless steel sheet metal screws.
- Paper Towel Dispenser fitted with TowelMate Accessory shall dispense 800 multifold paper towels.
- TowelMate Accessory Module has a 90 degree return towel guide angle to prevent paper towels from falling forward out when door is opened for servicing, and a TowelMate Nylon Support Rod fitted across the center of the towel tray opening to dispense paper towels one at a time without tabbing, tearing, bulging, sagging or bunching (falling through the opening).
- TowelMate dispenses one towel at a time, every time, to reduce towel usage by up to 20%.
- TowelMate eliminates the dispensing of handfuls of towels with the “Perfect Pull Rod” separating and dispensing individual C-fold or multifold towels.
- Patented TowelMate accessory installs in existing cabinets without tools and fits all Bobrick dispensers and similar models of other manufacturers.
- Optional TowelMate® Accessory Module for Bobrick Model Nos.:B-39003
- TowelMate® accessory modules come as a standard feature in all Bobrick ConturaSeries® accessories
Product Specs
- Towel Capacity : 600 C-fold; 800 multifold
- Parts and Accessories : TowelMate®
Resources
Manufacturer Resources
Product Specs
- Installation Type:
- Surface Mounted
- Product Type:
- Waste Control Inserts
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Parts and Accessories
- Department:
- Plumbing
- Application:
- Washroom Accessory
Bobrick 39003-130 – Frequently Asked Questions
1) What does the Bobrick B-39003-130 TowelMate actually do inside a towel dispenser?
The B-39003-130 TowelMate is an insert module that sits inside a folded towel dispenser cabinet and meters towels out one at a time. A black nylon support rod, 3/8 inch (10mm) diameter, runs across the center of the towel tray opening so users cannot pull a handful, and Bobrick states it cuts towel usage by up to 20 percent. The module also has a 90 degree return towel guide angle that keeps the stack from falling forward when the cabinet door is opened for servicing.
2) Can maintenance staff retrofit the TowelMate into dispensers already mounted on the wall?
Yes. The TowelMate module drops into existing cabinets in the field without tools, so there is no need to pull the dispenser off the wall. The easy-load channel and retainer is the part that speeds up the install and the reload.
3) Does adding a TowelMate change how many towels the dispenser holds?
A paper towel dispenser fitted with the TowelMate accessory holds 800 multifold towels, or 600 C-fold. Both fold types dispense one at a time through the rod, so you can keep whatever towel your facility already buys.
4) What is the Bobrick TowelMate module made of, and will it hold up in a high traffic restroom?
The module is Type-304 stainless steel with a 2B finish, fabricated from 50 to 70 percent recycled stainless. The nylon support rod is fastened to the module with stainless steel sheet metal screws, so the wear points are corrosion resistant, which matters in a wet washroom used all day.
5) Does the TowelMate help with sustainability documentation on a project?
Bobrick states the TowelMate meets US EPA Reduce and Reuse Resource Conservation Initiative compliance, and the module is fabricated of 50 to 70 percent recycled stainless steel. Bobrick publishes a LEED contribution bulletin covering the B-39003-130 for project submittals.
6) Will the TowelMate stop towels tearing or bunching as users pull them?
That is the point of the Perfect Pull rod. It separates individual C-fold or multifold towels so they come out without tabbing, tearing, bulging, sagging, or bunching down through the tray opening. For a property manager, that is fewer towels on the floor and fewer refill trips.
7) What finish does the B-39003-130 come in?
Silver, matching the Type-304 stainless 2B finish of the module. Since it sits inside the cabinet, it does not change the exposed appearance of the dispenser on the wall.
How fast can I get the Bobrick 39003-130 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 39003-130 come with a warranty?
Absolutely. The Bobrick 39003-130 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 39003-130?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 39003-130 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.