Bobrick B-505 Recessed Specime...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$820.79
Bobrick B-505 Recessed Specimen Pass-Through Cabinet

Bobrick B-505 Recessed Specimen Pass-Through Cabinet

(No reviews yet) Write a Review

Model: 505
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$820.79
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bobrick B-505 Recessed Specimen Pass-Through Cabinet

Provides convenient passage for specimen from patient area to laboratory. Mounts in walls 3″ to 5 3/4″ (75-145mm) thick. Type 304 stainless steel, satin finish. Self-closing doors. Interlocking mechanism prevents both doors from being open at the same time; provides sight barrier. Removable stainless steel tray. Rough Wall Opening: 11 1/2″ W, 10 7/8″ H (290 x 275mm); 3″ to 5 3/4″ (75-145mm) thick.

Features

  • Stainless steel, satin finish
  • Recessed Mount
  • 12-3/4″ W x 12-1/16″ H x 6″ D
  • Self closing doors, and removable stainless steel tray
  • Interlocking mechanism prevents both doors from being open at the same time; provides sight barrier.

Product Specs

  • Product Categories : Specimen Pass Throughs
  • Finish : Satin-Finish Stainless Steel

Resources

Manufacturer Resources

Product Specs

Steel Type:
304 stainless steel
Features:
Pass Through
Product Group:
Washroom/Bath Accessories
Product Subgroup:
Specimen Cabinet
Product Type:
Specimen Cabinet
Department:
Plumbing
Product Depth:
6"

Bobrick 505 – Frequently Asked Questions

1) How does a specimen pass-through cabinet keep the lab side and the patient side separated?
Both doors on the B-505 are self-closing, and an interlocking mechanism keeps one door shut whenever the other is open. That means there is never an open line of sight straight through the wall, and the toilet room side stays visually private while a specimen is being handed to the lab. The interlock is mechanical, so nothing needs power or wiring at the opening.
2) Is the Bobrick B-505 stainless steel good enough for a clinical or lab environment that gets wiped down daily?
It is built from Type 304 stainless steel in a satin finish, including a removable stainless tray inside. Type 304 is the standard corrosion-resistant grade for healthcare and food-contact washroom fittings and takes routine disinfectant wipe-downs without pitting the way a painted or plated cabinet would. The satin finish hides wipe marks better than a mirror polish.
3) Can the specimen tray in the B-505 be taken out for cleaning?
The tray lifts out. It is stainless steel and removable, so it can be pulled for cleaning or disinfecting between uses rather than being wiped in place inside the cabinet body. That is usually what decides this unit for an infection-control spec.
4) Can I install a specimen pass-through in an existing finished wall, or does it have to go in during construction?
The B-505 is a recessed unit and needs an 11-1/2 by 10-7/8 inch hole cut through the full wall, with the wall falling between 3 and 5-3/4 inches thick. In an existing partition that means cutting both faces, confirming no stud, pipe, or conduit runs through that bay, and framing the opening before the cabinet goes in. It is retrofittable, but it is a wall-opening job, not a screw-to-the-surface job.
5) How much clear depth does the Bobrick B-505 need behind the finish wall?
Six inches of cabinet depth, and the wall it sits in has to be 3 to 5-3/4 inches thick, so the body passes clean through the partition with the flange landing on each face. Check the bay for plumbing or conduit before cutting; nothing can run through that 11-1/2 by 10-7/8 inch opening.
6) What finish options does the Bobrick B-505 specimen cabinet come in?
One finish only: satin stainless. There is no polished, powder-coated, or bronze version of the B-505, so if the rest of the room hardware is a different finish, the cabinet will read as brushed stainless against it.
How fast can I get the Bobrick 505 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 505 come with a warranty?
Absolutely. The Bobrick 505 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 505?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 505 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!