You may also like
Bobrick B-635.MBLK Klutch Mobile Device Holder Matte Black
Model: BOB-B-635.MBLK
Bobrick B-635.MBLK Klutch Mobile Device Holder, Matte Black
Features
Wall mounted mobile device holder shall have a type 304 stainless steel front in matte black finish.
Back plate shall be type 304...
Bobrick
Starting at
$177.10
$152.10
Bobrick B-6351 Klutch Mobile Device Holder
Features
- Wall mounted mobile device holder shall have a type 304 stainless steel front in matte black finish
- Back plate shall be type 304 stainless steel in matte black finish
- Inside cradle and hook shall be 304 stainless steel in matte black finish
- Back plate shall mount onto wall with stainless steel, sheet metal screws
- Front plate including cradle shall be mounted onto back plate and secured in place with threaded posts
- Front hook shall be installed onto threaded posts and secured with set screws for theft resistance
- Glued rubber bands at back plate and cradle prevent the laptop or other devices against unintended slide out of the article
- Patented
Product Resources
Manufacturer Resources
Product Specs
- Capacity:
- 300 lb
- Features:
- ADA Compliant
- Installation Type:
- Wall Mounted
- Product Type:
- Klutch Device
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Parts and Accessories
- Product Material:
- Stainless Steel
- Department:
- Plumbing
- Product Depth:
- 2 3/8
- Parts and Accessories Type:
- Mounting Hardware
- Application:
- Washroom Accessory
Bobrick B-6351 – Frequently Asked Questions
1) How does the Bobrick Klutch device holder mount to the wall, and is any hardware included?
Mounting is a two-stage job. The back plate fastens to the wall with stainless steel sheet metal screws, then the front plate with its cradle attaches to the back plate on threaded posts. The front hook goes onto those same threaded posts and is locked down with set screws. Sheet metal screws hold into solid backing or blocking, so confirm you have something behind the finish wall to bite into before you lay it out.
2) How far does the Bobrick B-6351 stick out from the wall?
Projection is 2-3/8 inches. That matters in a narrow toilet compartment or a tight circulation path beside a lavatory, where anything standing proud of the wall eats into clear floor space. Plan the mounting height and location so the unit and whatever hangs on the hook stay clear of the door swing.
3) Is the Bobrick Klutch holder ADA compliant?
The B-6351 is listed as ADA compliant. For an accessible restroom the compliance still depends on where you put it, so set the mounting height and approach within reach range and keep the 2-3/8 inch projection out of any required clear floor area or accessible route.
4) What is the Bobrick B-6351 Klutch and what is it used for in a restroom?
The B-6351 Klutch is a wall mounted holder that gives a restroom user somewhere to set a phone, tablet, or laptop instead of the floor or the fixture. A cradle supports the device from below and a front hook holds a bag or coat. It is built for public washroom use, with a type 304 stainless steel front plate, back plate, cradle and hook, all in matte black.
5) Will the Bobrick B-6351 hold a laptop without it sliding off?
Yes. Rubber bands are glued to both the back plate and the cradle so a laptop or tablet grips instead of sliding out of the holder. The device rests in the cradle and leans back against the plate, which is what keeps a thin laptop in place.
6) Is the Bobrick Klutch vandal resistant enough for a public or high-traffic restroom?
It is built for it. All four components (front plate, back plate, cradle and hook) are type 304 stainless steel, and the front hook is secured to the threaded posts with set screws specifically for theft resistance, so it cannot simply be unscrewed off the wall by hand. 304 stainless also handles the humidity and cleaning chemicals in a washroom.
7) What finish does the Bobrick B-6351 come in, and can I get it in other colors?
Matte black only. The front, back plate, cradle and hook are all type 304 stainless steel finished in matte black, and the B-6351 is a single model with no finish options. If your washroom package is satin stainless throughout, the Klutch will read as a deliberate black accent rather than a match.
How fast can I get the Bobrick B-6351 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick B-6351 come with a warranty?
Absolutely. The Bobrick B-6351 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick B-6351?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick B-6351 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.