Bobrick B-6727 Double Robe Hook

Yes. The B-6727 is a surface mounted double hook that can go on either a wall or a toilet partition, which is why it turns up in commercial restroom and locker room packages as well as guest baths. The mounting flange is 2 inches by 2 inches, so you need a flat bearing surface at least that size at the hook location. On a partition panel, confirm you have appropriate through-fasteners or backing for the panel material.

It projects 2-5/16 inches (60mm) from the wall. The description lists the hook as ADA compliant. In a narrow stall that projection matters for door swing clearance, so measure from the finished wall face before you set the mounting height.

It's a single contoured bar 4 inches (100mm) wide that turns up into a hook at each end, so you get two hanging points from one unit and one set of fasteners. Overall envelope is 4 in W x 2 in H x 2-5/16 in D. If you need two separate hanging locations spread across a wall, run two single hooks instead; the B-6727 puts both points within that 4 inch span.

Two finishes: satin and bright polished. Satin stainless is the standard commercial choice and is what most Bobrick washroom accessory lines ship in, so it lines up with satin grab bars, dispensers, and mirror frames on the same job. Bright polished is a mirror finish and will read differently next to satin hardware, so pick one and hold it across the room.

Stainless steel construction, with the satin version finished in satin stainless. That's what makes it workable in high-humidity and high-traffic washrooms where a plated or painted hook corrodes at the fastener holes.

It works as a one-spec item for a portfolio: stainless steel, surface mount, and mountable on walls or partitions, so the same part covers apartment baths, pool changing rooms, and common restrooms. Ordering in one finish (most fleets go satin) keeps replacements interchangeable later. The only thing to check per location is that you have a solid 2 x 2 inch bearing area and backing at the mounting point.