You may also like
Bobrick B-5456 - Surface-Mounted Towel Bar, 18"
Model: BOB-B-5456
Bobrick B-5456 Surface-Mounted Towel Bar
Threaded escutcheon conceals mounting plate, provides snug fit to the wall. Available in 18″ and 24″ lengths. Projects 3-3/4″ from wall.
Features
Stainless...
Bobrick
Starting at
$135.16
$101.63
Bobrick B-676X24 Surface-Mounted 24" Towel Shelf with Towel Bar
This towel shelf protrudes 8 1/2" from the wall to provide both hanging room for wet or dry towels and shelf space for additional items. It secures to the wall with two concealed 16-gauge stainless steel wall plates featuring stainless-steel locking set-screws. The 4 shelf bars and added bar below are 5/16" square tubing. The all-welded construction provides reliability and durability as you use this bar in your commercial or institutional establishment.
Features
- Stainless steel, satin finish
- Surface Mount
- 26″ W x 8-1/2″ D
Products Spec
- Product Categories : Towel
Product Resources
Manufacturer Resources
Product Specs
- Shelf Height:
- 2"
- Product Type:
- Shelf
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Shelf
- Product Material:
- Stainless Steel
- Department:
- Plumbing
Bobrick 676X24 – Frequently Asked Questions
1) How far does the Bobrick B-676X24 towel shelf stick out from the wall?
The B-676X24 projects 8-1/2 inches off the finished wall, with an overall width of 26 inches. That projection is what gives you both a shelf surface on top and clearance underneath for towels to hang on the lower bar. In a narrow washroom or a corridor-side wall, measure your clear circulation before committing to an 8-1/2 inch projection.
2) Does this Bobrick towel shelf mount on the surface or does the wall need to be prepped and recessed?
Surface mounted. The shelf hangs on two concealed 16-gauge stainless steel wall plates that fasten to the wall first, then the unit drops over them and is locked with stainless steel set screws. No wall cavity or recess prep is needed, so it works on existing tile, block, or drywall with appropriate anchors during a retrofit.
3) Is the Bobrick B-676X24 tough enough for a public restroom or gym locker room?
It is built for commercial and institutional use: stainless steel throughout with all-welded construction, so there are no fasteners in the bars to work loose under pulling and hanging loads. The concealed mounting plates with set screws also mean nothing visible for a user to unscrew, which matters in high-traffic and semi-public washrooms.
4) How much room is there above the shelf bars for storing items?
Shelf height on the B-676X24 is 2 inches, measured at the shelf itself. That is enough for folded towels, toiletry bottles, or a small amenity tray sitting on the four 5/16 inch square tubing bars, but it is an open-bar shelf rather than a solid tray, so small loose items can fall through.
5) Do I need a separate towel bar if I install this shelf?
No. The B-676X24 has a towel bar integrated below the shelf, an added 5/16 inch square tube bar beneath the four shelf bars. One unit covers both the shelf and the hanging function, which saves a second wall penetration and a second item to specify in a hotel or dorm bath.
6) What finish is the Bobrick 676X24 towel shelf, and will it match other stainless washroom accessories?
Satin finish stainless steel. That is the same finish Bobrick uses across most of its surface-mounted washroom line, so it reads consistently alongside satin stainless grab bars, paper dispensers, and mirrors already on the wall. If your existing accessories are bright polished or a painted finish, it will not match.
7) Can wet towels go on this or is it shelf only?
Both. The 8-1/2 inch projection was chosen to give hanging room for wet or dry towels on the lower bar while still leaving usable shelf space above. The open square-tube bar design lets a wet towel air out rather than sitting against a solid panel.
8) How is the Bobrick B-676X24 ordered, and what model number do I give my supplier?
It is a single model with no finish or size options to specify: Bobrick B-676X24, the 24 inch towel shelf with towel bar, in satin stainless. Give the full designation B-676X24 so it is not confused with other lengths in the B-676 family.
How fast can I get the Bobrick 676X24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 676X24 come with a warranty?
Absolutely. The Bobrick 676X24 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 676X24?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 676X24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.