Bobrick B-6898.99 L-Shape, 90 Degree Grab Bar – 30" x 30", Peened Grip

Bobrick's B-6898.99 L-shape grab bar complies with accessible design requirements, including ADAAG in the U.S.A., for structural strength. The 1-1/2 inch (38mm) diameter tube is the standard gripping surface size for accessible grab bars, and the L-shape is typically used behind a water closet or in a transfer shower where both a horizontal and vertical grip are wanted.

The B-6898.99 is a 90 degree L-shape bar with 30 inch by 30 inch legs, so both the horizontal and vertical runs measure 30 inches. That equal-leg geometry is what lets it cover a back wall and side grip from a single mounted piece instead of two separate straight bars.

Peened means the gripping surface is textured rather than smooth, so it stays grippable when hands are wet or soapy. On the B-6898.99 that texture sits on a satin-finish type-304 stainless bar. For shower and tub installs, locker rooms, and high-traffic public restrooms, the peened grip is the one to specify; a plain satin bar is generally chosen where appearance drives the decision and the bar stays dry.

Product depth on the B-6898.99 is 1-1/2 inches, matching the tube diameter. Accessible design calls for 1-1/2 inches of clear knuckle space between a grab bar and the wall, so confirm your flange and tile buildup keep that clearance when you set the mounting points.

The B-6898.99 is built from 18 gauge type-304 stainless, and Bobrick rates it as complying with accessible design for structural strength. Type-304 also holds up to the chlorides and cleaning chemicals in institutional restrooms and shower rooms better than plated steel, which is why it is the usual specification for schools, healthcare and multi-family washrooms.

Yes. An L-shape bar like the B-6898.99 carries load at both ends and at the corner, and the bar itself is built to accessible-design structural strength, so the wall has to be too. Plan solid blocking or a backing plate behind the finished wall at every flange location. Anchoring into tile and board alone will fail long before the bar does.

It ships in one finish, satin stainless, which is the same finish used across most commercial washroom accessory lines, so it reads consistently alongside existing satin dispensers, mirrors and straight bars. The only visual difference is the peened texture on the grip itself.