Bobrick B-5806.99 Straight ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$72.81
$44.13
Bobrick B-5806.99 Straight Peened Grip Bar

Bobrick B-5806.99 Straight Peened Grip Bar

(No reviews yet) Write a Review

Model: 5806.99x12

In Stock (leaves warehouse same day if ordered before 3pm ET)

$72.81
$44.13
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bobrick Diameter Straight Peened Grip

1-1/4″ (32mm) diameter tubing. Satin-Finish, slip-resistant surface stainless steel grab bar for bath/shower/toilet compartment. Snap Flange. Add .99 for peened surface.

Available lengths straight/satin:

  • B-5806 x 18: 18″ (455mm)
  • B-5806 x 24: 24″ (610mm)
  • B-5806 x 30: 30″ (760mm)
  • B-5806 x 36: 36″ (915mm)
  • B-5806 x 42: 42″ (1065mm)
  • B-5806 x 48: 48″ (1220mm)

Available lengths straight/peened:

  • B-5806.99 x 18: 18″ (455mm)
  • B-5806.99 x 24: 24″ (610mm)
  • B-5806.99 x 30: 30″ (760mm)
  • B-5806.99 x 36: 36″ (915mm)
  • B-5806.99 x 42: 42″ (1065mm)
  • B-5806.99 x 48: 48″ (1220mm)

Features

  • Stainless steel, satin finish with peened grip
  • Surface Mount
  • 48″ L x 1-1/4″ Diameter
  • Cover snaps over mounting flange to conceal screws
  • This unit meets ADA Accessibility Guidelines in the U.S.

Product Specs:

  • Finish : Satin-Finish Stainless Steel, Satin-Finish Stainless Steel - Peened
  • Configuration : Straight
  • Diameter : 1-1/4" (32mm)
  • Accessibility : ADA Compliant

Resources:

Manufacturer Resources

Product Specs

Capacity:
900 lbs
Product Type:
Grab Bars
Steel Type:
304 stainless steel
Product Group:
Washroom/Bath Accessories
Product Subgroup:
Grab Bars
Product Diameter:
1-1/4"
Product Material:
Stainless Steel
Department:
Plumbing

Bobrick 5806.99x12 – Frequently Asked Questions

1) What is the difference between the Bobrick B-5806 and the B-5806.99 grab bar?
Same bar, different gripping surface. The .99 suffix adds a peened surface to the satin-finish stainless tubing, giving a slip-resistant texture for wet locations like showers and tub surrounds. Without the .99 you get the plain satin finish. Both are 1-1/4 inch diameter straight bars with a snap flange cover, offered in 18, 24, 30, 36, 42 and 48 inch lengths.
2) Does the Bobrick B-5806.99 peened grab bar meet ADA requirements?
Bobrick states the B-5806 meets ADA Accessibility Guidelines in the U.S., and the 1-1/4 inch tubing diameter is within the ADA gripping-surface range. Length and mounting height still have to be picked per the fixture: ADA generally calls for a 42 inch side wall bar and a 36 inch rear wall bar at a water closet, both of which are stocked lengths here.
3) What length grab bar should I order for a bathtub or shower stall?
Pick from 12, 18, 24, 30, 36, 42 or 48 inches. Shorter runs (12 to 24 inches) are typically used as vertical assist bars at a tub entry or shower control wall; 36 to 48 inches covers the long horizontal run on a back wall. Every length is the same 1-1/4 inch peened stainless tube with the snap flange.
4) Will the mounting screws be visible on the Bobrick B-5806.99?
No. It is a surface-mounted bar and the flange cover snaps over the mounting flange to conceal the fasteners, so the finished install shows a clean stainless flange against the wall.
5) What grade of stainless is the Bobrick B-5806.99 grab bar made from?
304 stainless steel tubing in a satin finish with the peened texture worked into the grip area. 304 is the standard corrosion-resistant grade for wet washroom environments, which is why it holds up in showers, gang toilet rooms and pool locker rooms.
6) Is the peened grab bar worth it over the plain satin one for a shower?
In a wet shower or tub compartment, yes. The peened surface is a textured, slip-resistant grip that a soapy wet hand holds onto better than smooth satin stainless. For a dry-side application like a hallway assist or an ambulatory stall outside the spray zone, the standard B-5806 satin bar does the same structural job.
7) Can I mix these Bobrick peened bars with satin bars already installed in my building?
They will match in form but not in surface. The B-5806 and B-5806.99 share the same 1-1/4 inch tube, straight configuration and snap flange, so they line up visually, but the peened version has a visibly textured grip against the smooth satin of the plain bar. For a uniform look across a facility, standardize on one suffix.
How fast can I get the Bobrick 5806.99x12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 5806.99x12 come with a warranty?
Absolutely. The Bobrick 5806.99x12 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 5806.99x12?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 5806.99x12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!