You may also like
Bobrick Bottom Housing Assembly Foam - Includes Installation Hardware Packet And Foam Mixer Housing
Features
- Polished chrome finish
- Convenient top-filling for labor savings
- Use of universal bulk foam soaps for significant cost-in-use savings
- Automatic, “touch-free” minimizes cross contamination
- Post consumer waste reduction by 57% contributes to sustainability
- Unique portion control feature optimizes patron satisfaction with operating budget
- Capacity: 34-fl. oz (1.0 L).
Products Spec
- Product Type : Soap Dispenser & Coordinated Faucet, Soap Dispenser
- Finish : Polished Chrome
- Material : Plastic
- Mounting Type : Counter Mounted
- Mounting Options : Deck Mounted
- Operation : Automatic
- Dispense Type : Foam Soap
- Capacity : 34-fl oz (1.0-L)
- Features : Top Fill, Low Battery Indicator
- Accessibility : ADA Compliant
Manufacturer Resources:
Manufacturer Resources
Product Specs
- Spout Length:
- 6-3/4"
- Product Type:
- Automatic Counter-Mounted Foam Soap Dispenser
- Capacity:
- 34 oz
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Parts and Accessories
- Department:
- Plumbing
- Parts and Accessories Type:
- Soap Dispenser
- Application:
- Washroom Accessory
Bobrick 828-550 – Frequently Asked Questions
1) What exactly comes in the Bobrick B-828-550 bottom housing assembly?
The B-828-550 is the below-deck bottom housing assembly for the Bobrick B-828 automatic counter-mounted foam soap dispenser. It ships with the installation hardware packet and the foam mixer housing, so it covers the under-counter half of the unit rather than the visible spout and top-fill head.
2) Is this a complete soap dispenser or a replacement part?
It is a replacement component, not a complete dispenser. A facility ordering the B-828-550 is replacing the bottom housing on an existing B-828 counter-mounted foam unit. If the whole fixture is being replaced, the complete automatic counter-mounted foam dispenser is the part to order instead.
3) Will this foam housing work on a liquid soap dispenser?
No. The mixer housing in this assembly is built for foam soap, which is aerated on the way out. A liquid-dispensing unit uses different internals and this part won't convert it. The B-828 system it belongs to runs universal bulk foam soaps.
4) How much clearance do I need under the sink deck for a Bobrick B-828 counter-mounted dispenser?
The B-828 is a deck-mounted unit with the bottle and mixer housing hanging below the counter, so the cabinet has to be clear of trap arms and supply lines where this assembly drops through the deck hole. Above the counter, the spout reaches out 6-3/4 inches, so check that it clears the bowl rim and doesn't drip on the deck.
5) How much soap does the Bobrick B-828 dispenser hold, and does this part set that capacity?
The reservoir holds 34 fl oz (1.0 L). That capacity comes from the bottle assembly, and the bottom housing is what carries it under the deck. Top filling means the maintenance tech refills from above the counter without opening the cabinet.
6) Does the Bobrick B-828 soap dispenser meet ADA requirements?
Yes, the B-828 automatic counter-mounted foam dispenser is listed as ADA compliant. It is touch-free, which removes the grasping and twisting effort, and the 6-3/4 inch spout puts the dispense point out over the bowl so a user does not have to reach across the deck.
7) Do I need batteries or power for the Bobrick B-828 automatic dispenser?
The B-828 is battery powered and has a low battery indicator, so it needs no electrical rough-in at the deck. Housekeeping gets a warning before the unit stops dispensing. Batteries live with the sensor and pump side of the unit, not in this bottom housing assembly.
8) Can I use any bulk soap in the Bobrick B-828, or do I have to buy Bobrick cartridges?
It takes universal bulk foam soap, so a facility is not locked into a proprietary cartridge and can keep buying the foam concentrate it already stocks. Bobrick also cites a 57 percent post consumer waste reduction versus cartridge systems, which is the argument for bulk fill on a large restroom fleet. The soap must be a foam formulation to work with the mixer housing.
9) What finish does the B-828-550 come in, and will it match my existing chrome faucets?
Polished chrome, and that's the only finish offered. It coordinates with polished chrome faucets, which is what most commercial lavatory decks run. Note that this bottom assembly sits below the counter, so the finish matters mainly for matching the rest of the B-828 unit above the deck.
10) Our B-828 dispensers are using too much soap per activation. Is that adjustable?
Yes. The B-828 has a portion control feature that lets you set the shot size, which is how facilities managers bring soap consumption in line with the operating budget across a building full of restrooms. It is set on the dispenser itself, not on this bottom housing part.
How fast can I get the Bobrick 828-550 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 828-550 come with a warranty?
Absolutely. The Bobrick 828-550 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 828-550?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 828-550 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.