You may also like
Bobrick B-2013 - Automatic Wall Mounted Foam Soap Dispenser
Model: BOB-B-2013
Bobrick B-2013 Automatic Wall Mounted Foam Soap Dispenser
Automatic wall-mounted soap dispenser shall be Type-304 stainless steel with satin finish. Corrosion-resistant valve shall dispense a variety...
Bobrick
$336.90
$265.64
Bobrick B-8263.18 Automatic Soap Dispenser Starter Kit, Foam
Model: BOB-B-8263.18
Bobrick B-8263.18 Automatic Soap Dispenser Starter Kit, FoamProduct SpecsProduct Type : Soap DispenserFinish : Polished ChromeMaterial : PlasticMounting Type : Counter MountedMounting Options : Deck...
Bobrick
$306.91
$287.49
Bobrick B-8281 SureFlo® Automatic, Top Fill Bulk Foam Soap Dispenser
The automatic, top-fill, bulk foam soap dispenser was specifically designed to fit into existing 1″ diameter counter holes. Ideal upgrade for touchless soap dispensing. The “touch-free” foam soap dispenser minimizes cross contamination, allows for easy maintenance with top-filling, and provides unrivaled foam quality. Uses universal bulk foam soaps for significant cost-in-use savings and offers a unique soap control dial for optimal foam quality dispensed to address patron preferences. Available in a chrome finish for design continuity.
Manufacturer Resources:
Designers Note:
New installation – Ensure mounting hole is 1″ (25.4mm) in diameter. Refer to installation instruction with mounting template link below.Product Specs:
Manufacturer Resources:
Manufacturer Resources
Product Specs
- Operation:
- Automatic
- Capacity:
- 34 oz
- Dispenser Type:
- Foam Soap
- Features:
- Top Fill, Low Battery Indicator
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Soap Dispensers
- Mounting Method:
- Deck Mounted
- Product Material:
- Plastic
- Department:
- Plumbing
Bobrick B-8281 – Frequently Asked Questions
1) Will the Bobrick B-8281 soap dispenser fit my existing 1 inch counter hole?
Yes. The B-8281 SureFlo dispenser was designed specifically to drop into existing 1 inch (25.4mm) diameter counter holes, which is why it is a common swap for an older deck-mounted manual dispenser. For a new counter or deck, drill the mounting hole at 1 inch (25.4mm). Anything larger and the spout escutcheon will not seat properly.
2) Does the B-8281 use bulk soap or proprietary cartridges?
Bulk. The B-8281 is a top-fill bulk foam dispenser that runs on universal bulk foam soaps rather than a sealed cartridge, so a facility buying soap by the gallon is not locked into one supplier. Bobrick publishes a recommended soaps list for it. Note it is foam only, so a liquid or lotion hand soap will not foam correctly through it.
3) How much soap does the Bobrick B-8281 hold before it needs refilling?
Capacity is 34 fl oz (1.0 L). It fills from the top of the counter, so an attendant does not have to open a cabinet or get under the sink to top it off, which is the practical difference between this and an under-deck reservoir unit in a high-traffic restroom.
4) Is the Bobrick B-8281 touchless, and how do I know when the batteries are dying?
It is a fully automatic, touch-free dispenser, which is the reason it gets specified in healthcare and food service where cross contamination matters. It carries a low battery indicator, so staff get a warning before the unit stops dispensing rather than discovering it dead at a shift change.
5) Is the B-8281 ADA compliant for a public restroom counter?
Bobrick lists the B-8281 as ADA compliant. It is counter/deck mounted and automatic, so there is no grasping or pinching required to operate it. Mounting height and forward reach on your counter are still governed by where you set the lavatory, so lay the deck out to your ADA reach range.
6) Can I adjust how much foam the Bobrick B-8281 puts out per activation?
Yes, there is a soap control dial that tunes foam quality and output, so you can dial it back for a lobby restroom to cut consumption or open it up where users expect a heavier shot. It is the same dial used to compensate for different bulk foam soap viscosities.
7) What finish and material is the Bobrick B-8281 dispenser, and will it match my chrome faucets?
Polished chrome is the finish offered, which is what makes it a straightforward match to standard chrome lavatory faucets across a run of restrooms. The body is plastic with the chrome finish applied, not solid brass, so it is a deck accessory rather than a load-bearing fitting.
How fast can I get the Bobrick B-8281 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick B-8281 come with a warranty?
Absolutely. The Bobrick B-8281 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick B-8281?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick B-8281 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.