You may also like
Bobrick B-830-359 Liquid, Soap Pump Spout Length, Bright Polished Stainless Steel with Shank
Model: BOB-B-830-359
Bobrick B-830-359 - Liquid Soap Pump, Mounting Shank Kit 4"Foam soap pump assembly with a 4" spout length (B-823), made of bright-polished stainless steel.Has a swivel built-in to allow spout to...
Bobrick
$102.39
$71.31
Bobrick B-830-372 SureFlo® Liquid Soap Pump Assembly 6" Spout
- Bobrick 830-372 SureFlo® Liquid Soap Pump Assembly 6" Spout
- Liquid soap pump assembly with a 6" spout length (B-8226), made of bright-polished stainless steel with a 3" shank.
Has a swivel built-in to allow spout to rotate 360° and remain sealed. - Bobrick SureFlo® liquid soap pump assembly includes:
(1) Soap Pump with 6" Spout
(1) Short Shank - Bobrick 830-359 Liquid Soap Pump with 4" Spout (B-822) OR Bobrick 830-372 Liquid Soap Pump with 6" Spout (B-8226) is required for the new installation of a Bobrick B-830 SureFlo® Soap Dispensing System.
Manufacturer Resources
Product Specs
- Product Type:
- Soap Pump 6" Spout
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Parts and Accessories
- Department:
- Plumbing
- Parts and Accessories Type:
- Spout
- Application:
- Faucet
Bobrick 830-372 – Frequently Asked Questions
1) Do I need the B-830-372 soap pump to install a Bobrick B-830 SureFlo soap dispensing system?
Yes. A new Bobrick B-830 SureFlo installation requires a pump assembly, and you pick one of two: the 830-372 with the 6 inch spout (B-8226) or the 830-359 with the 4 inch spout (B-822). The system will not dispense without one of them, so order the pump alongside the B-830 valve and reservoir components.
2) What is the difference between the Bobrick 830-372 and the 830-359 soap pump?
Spout reach. The 830-372 is the 6 inch spout version, catalogued as B-8226; the 830-359 is the 4 inch spout version, catalogued as B-822. Both serve the same B-830 SureFlo system, so choose by how far the spout has to clear the deck to land soap in the bowl. Deeper or wider lavatories, and counters where the faucet sits well back from the basin, are where the 6 inch pays off.
3) Will the 3 inch shank on this Bobrick soap pump go through a thick stone countertop?
The shank supplied with the 830-372 is the short one, 3 inches. That covers standard lavatory decks and typical countertop thicknesses. On a thick slab, a built-up stone edge, or a deck with a deep mounting boss underneath, measure your total stack first, because a 3 inch shank has a limited amount of thread to reach the underside nut and the tubing connection.
4) Is this a complete soap dispenser or just the deck-mounted part?
Just the deck-mounted part. The 830-372 is the pump and spout assembly that mounts through the lavatory deck, the same way a faucet does, and it draws soap from a separate Bobrick B-830 SureFlo supply below the counter. Buying this alone will not give you a working dispenser if you do not already have the B-830 system in place.
5) What comes in the box with the Bobrick B-830-372 soap pump?
Two pieces: the soap pump with the 6 inch spout, and one short shank. The shank supplied measures 3 inches. Nothing else in the dispensing system (reservoir, tubing, valve) is included here.
6) Can the spout be turned toward the basin after it is mounted?
Yes. A swivel is built into the assembly so the spout rotates a full 360 degrees and stays sealed while it turns. That matters on multi-station washrooms where you want every spout aimed the same way, and in facilities where users push the spout aside.
7) What finish is the Bobrick B-830-372 soap pump, and will it match my other washroom trim?
The pump is bright-polished stainless steel, a mirror-bright finish that reads like chrome next to polished faucets and grab bars. If the rest of the washroom is satin or brushed stainless, the polished spout will stand out, so pick the finish option that matches the fittings already on the deck.
8) Can I use this pump to replace a worn spout on an existing SureFlo counter-mounted dispenser?
If the existing station is a Bobrick B-830 SureFlo and you want the 6 inch reach, the 830-372 (B-8226) is the pump-and-spout assembly for it, supplied with the 3 inch short shank. For like-for-like on a shorter spout, the 830-359 (B-822) is the 4 inch version. Confirm which spout length is on the deck now so the replacement lands soap in the same spot.
How fast can I get the Bobrick 830-372 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 830-372 come with a warranty?
Absolutely. The Bobrick 830-372 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 830-372?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 830-372 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.