You may also like
Bolt 10-32 x 1 RH CD Stove Blt St-Z (100 pcs)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Bolts
Metallics RSB98 – Frequently Asked Questions
1) What thread size and length is the Metallics RSB98 stove bolt?
The RSB98 is a 10-32 x 1 inch stove bolt. That is a #10 machine screw diameter with 32 threads per inch, so it mates with a standard 10-32 nut or tapped hole, and the 1 inch length is measured on the shank under the round head.
2) Will a 10-32 x 1 inch stove bolt work for grounding screws or box mounting?
10-32 is the standard thread used on electrical boxes and device mounting holes, so the RSB98 threads into those tapped holes. Note what it is, though: a round head combination drive stove bolt, meant to be run through with a nut or into a tapped hole. It is not a listed green grounding screw, so if the job calls specifically for a ground screw, order that part.
3) Is the Metallics RSB98 bolt a Phillips or a slotted head?
Round head with a combination drive, so it takes either a slotted (flat) screwdriver or a Phillips bit. Handy on a panel or box where you only have one driver in your pouch.
4) Are Metallics RSB98 stove bolts zinc plated or stainless?
These are steel with a zinc plating, not stainless. Zinc plated steel is fine for dry indoor electrical work, boxes, panels and enclosures, but for wet, coastal or corrosive locations you want a stainless fastener instead.
5) How many bolts come in a box of Metallics RSB98?
One hundred pieces per pack. That is a bulk count aimed at MRO stock and electrical contractors who burn through 10-32 hardware on box and device work, rather than a small retail card of a dozen.
6) What is the Metallics part number for the 10-32 x 1 zinc stove bolt?
Metallics catalogs it as RSB98, a 10-32 x 1 round head combination drive stove bolt in zinc plated steel, packed 100.
How fast can I get the Metallics RSB98 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics RSB98 come with a warranty?
Absolutely. The Metallics RSB98 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics RSB98?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics RSB98 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.