Metallics JG8HTB2 Bolt 1/4-20 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.53
$0.53
Image coming soon

Metallics JG8HTB2 Bolt 1/4-20 x 1 G8 Hx Tap Blt St- Z (Jar 100)

(No reviews yet) Write a Review

Model: JG8HTB2

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.53
$0.53
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Bolt 1/4-20 x 1 G8 Hx Tap Blt St- Z (Jar 100)

Manufacturer Resources

Product Specs

Division:
Electrical H1
Pack Type:
Jar
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Department:
Electrical
Product Subgroup:
Bolts

Metallics JG8HTB2 – Frequently Asked Questions

1) What size and grade is the Metallics JG8HTB2 hex tap bolt?
The JG8HTB2 is a 1/4-20 x 1 inch Grade 8 hex tap bolt in steel with a zinc finish. Tap bolt means it is threaded the full length of the 1 inch shank rather than having an unthreaded shoulder, so you get thread engagement right up to the head.
2) What nut do I need with a 1/4-20 x 1 Grade 8 tap bolt?
A 1/4-20 nut, and it should be a matched hardened grade if you want the joint to carry the bolt's strength. The JG8HTB2 ships as bolts only, so nuts and washers are separate line items.
3) Can I use a Grade 8 hex tap bolt instead of a Grade 5 for strut and equipment mounting?
Yes, Grade 8 is the higher-strength steel of the two and substitutes into anywhere a Grade 5 1/4-20 x 1 was specified. The reverse is not true: do not drop a Grade 5 into a Grade 8 callout. Grade 8 is also less forgiving of over-torque in soft or thin material because it will strip the threads in the softer part before it yields itself.
4) How much thread length do I get for clamping with the JG8HTB2?
The full 1 inch under the head is threaded, so your usable grip is 1 inch minus whatever the nut and washers take up. For stacking two pieces of strut or a thicker bracket, step up to a longer 1/4-20 length rather than running the nut out to the end of the threads.
5) Is a zinc plated Grade 8 bolt suitable for outdoor or damp locations?
Zinc plating on the JG8HTB2 is a general-purpose indoor and protected-location coating. It handles dry interior electrical and mechanical work fine, but for sustained wet exposure, exterior rooftop equipment, or coastal air you want a hot-dip galvanized or stainless fastener instead.
How fast can I get the Metallics JG8HTB2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JG8HTB2 come with a warranty?
Absolutely. The Metallics JG8HTB2 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JG8HTB2?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JG8HTB2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.