You may also like
Metallics JG5HTB51 Bolts 1/4-20 X 2-1/4 G5 Hx Tap Blt S (Jar 100)
Model: MET-JG5HTB51
Bolts 1/4-20 X 2-1/4 G5 Hx Tap Blt S (Jar 100)
Additional Notes
Other sizes and quantities available by request
Features
A cap screw made from medium carbon steel and heat-treated
Used to mount...
Metallics
$50.47
$0.47
Bolts 1/4-20 X 1-1/4 G5 Hx Tap Blt (Jar 100)
Features
- Used to mount motor to machinery. Also popular in automotive and truck repair
- A cap screw made from medium carbon steel and heat-treated
Additional Notes
- Other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Arra Compliant:
- C
- Buy American Compliant:
- C
- Country Of Origin:
- United States
- Division:
- Electrical H1
- Fastener Head Height:
- May-32 in.
- Fastener Head Type:
- Hex
- Fastener Head Width:
- 0.428 - 0.438 in.
- Fastener Height:
- 0.150 - 0.163
- Fastener Length:
- 1/1/04
- Fastener Width:
- 0.488 - 0.505
- Grade:
- 5
- Hardness:
- Rockwell C19-30
- Language Code:
- EN
- Material Standard:
- AISI 1008 - 1026
- Order Minimum Imperial:
- 100
- Order Minimum Uom Imperial:
- CT
- Outside Diameter:
- 0.2450 - 0.2500 IN
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Product Height:
- 3.6 in
- Product Length:
- 3 in
- Product Weight:
- 943 g
- Product Width:
- 76.2 MM
- Sub Division:
- Electrical-E H2
- Tensile Strength:
- 105000 psi minimum
- Thread Direction:
- Right Hand
- Thread Per Inch:
- 20
- Thread Standard:
- ASME B18.2.1-2012
- Wrenching Height:
- 0.106
- Yield Strength:
- 105000 psi minimum
- Department:
- Electrical
- Product Subgroup:
- Bolts
- Product Type:
- Hexagonal Bolt
- Type2:
- Hexagonal Bolt
- Series:
- G5HTB and JG5HTB
- Product Finish:
- Zinc
- Product Details:
- Hexagonal Bolt
- Product Material:
- Steel
Metallics JG5HTB49D – Frequently Asked Questions
1) Will a 1/4-20 Grade 5 hex tap bolt thread into a standard 1/4-20 tapped hole in a motor base?
Yes. The Metallics JG5HTB49D is a 1/4-20 right-hand thread bolt at 20 threads per inch, made to ASME B18.2.1-2012, with a body outside diameter of 0.2450 to 0.2500 inch. Any clean 1/4-20 tapped hole or 1/4-20 nut takes it. Because it is a tap bolt, the thread runs the full length, so it works in shallow tapped holes where a partially threaded cap screw would bottom out on the unthreaded shank.
2) Is Grade 5 strong enough for mounting a motor, or do I need Grade 8?
Grade 5 medium carbon steel, heat treated, with a minimum 105,000 psi tensile and hardness of Rockwell C19-30. That is the normal specification for motor mounting and general machinery and automotive work, which is what this bolt is made for. Step up to Grade 8 only where a drawing or torque spec calls for it, such as high preload structural or driveline joints.
3) Do these Metallics hex tap bolts qualify for a Buy American or ARRA funded project?
Yes. The JG5HTB49D is made in the United States and is flagged compliant for both Buy American and ARRA requirements, which is what a government, school, or healthcare procurement file usually needs on fasteners.
4) Can I use these zinc plated Grade 5 bolts outdoors or in a wet location?
The finish is zinc plating over steel, which handles indoor, dry, and occasionally damp service. It is not a marine or continuously wet finish. For rooftop equipment, washdown areas, or coastal exposure, specify hot dip galvanized or stainless instead, since zinc plate on carbon steel will eventually rust through in standing moisture.
5) How many 1/4-20 x 1-1/4 bolts come in a jar, and can I buy fewer?
They ship as a jar of 100 count, and 100 is the order minimum, so the jar is the smallest unit. The filled jar weighs 943 g. Metallics also offers other sizes and quantities in the G5HTB and JG5HTB series by request.
6) Which standard do these 1/4-20 hex bolts conform to for dimensions and material?
Head and thread dimensions follow ASME B18.2.1-2012, and the steel is within AISI 1008 to 1026. Yield is listed at 105,000 psi minimum. That combination is what a spec writer or inspector wants to see cited on a submittal for Grade 5 carbon steel hex bolts.
How fast can I get the Metallics JG5HTB49D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JG5HTB49D come with a warranty?
Absolutely. The Metallics JG5HTB49D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JG5HTB49D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JG5HTB49D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.