Metallics JG5HTB30 Bolts 3/8-1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$51.09
$1.93
Metallics JG5HTB30 Bolts 3/8-16 x 1-3/4 G5 Hx Tap Blt S (Jar 100)

Metallics JG5HTB30 Bolts 3/8-16 x 1-3/4 G5 Hx Tap Blt S (Jar 100)

(No reviews yet) Write a Review

Model: JG5HTB30
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$51.09
$1.93
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Bolts 3/8-16 x 1-3/4 G5 Hx Tap Blt S (Jar 100)

  • Features

    • Used to mount motor to machinery. Also popular in automotive and truck repair
    • A cap screw made from medium carbon steel and heat-treated

  • Additional Notes

    • Other sizes and quantities available by request

Manufacturer Resources

Product Specs

Arra Compliant:
C
Buy American Compliant:
C
Division:
Electrical H1
Fastener Head Height:
15/64 in.
Fastener Head Type:
Hex
Fastener Head Width:
0.551 - 0.562 in.
Fastener Height:
0.226 - 0.243
Fastener Length:
1/3/04
Fastener Width:
0.628 - 0.650
Grade:
5
Hardness:
Rockwell C19-30
Language Code:
EN
Material Standard:
AISI 1008 - 1026
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Tap_Bolt_St-Zn_and_18-8_SS.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Outside Diameter:
0.3690 - 0.3750 IN
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
7.25 in
Product Length:
4.5 in
Product Weight:
2753 g
Product Width:
114.3 MM
Sub Division:
Electrical-E H2
Tensile Strength:
105000 psi minimum
Thread Direction:
Right Hand
Thread Per Inch:
16
Thread Standard:
ASME B18.2.1-2012
Wrenching Height:
0.16
Yield Strength:
105000 psi minimum
Department:
Electrical
Product Subgroup:
Bolts
Product Type:
Hexagonal Bolt
Type2:
Hexagonal Bolt
Series:
G5HTB and JG5HTB
Product Finish:
Zinc
Product Details:
Hexagonal Bolt
Product Material:
Steel

Metallics JG5HTB30 – Frequently Asked Questions

1) Is Grade 5 strong enough for a motor mount, or do I need Grade 8?
Grade 5 medium carbon steel, heat treated, with 105,000 psi minimum tensile and yield and a hardness of Rockwell C19-30. That is the normal choice for motor mounting and general machinery bolting. Step up to Grade 8 only where the engineer calls for the higher proof load on a highly loaded or shock-loaded joint.
2) Is a hex tap bolt threaded the full length, and does that matter for mounting a motor?
A hex tap bolt is threaded right up to the head rather than having a plain shank, which is why it is used to mount motors to machinery and shows up in automotive and truck repair work. Full thread lets you thread into a tapped hole at any depth within the 1-3/4 inch length, instead of being limited by a grip length.
3) What wrench or socket size fits the head on this 3/8-16 Grade 5 hex bolt?
Head width across flats measures 0.551 to 0.562 inch, which is a 9/16 inch wrench or socket. Head height is 15/64 inch, with 0.16 inch of wrenching height, so a standard hex socket seats on it without needing a thin-wall.
4) Will a zinc plated steel bolt hold up outdoors or in a wet mechanical room?
Finish is zinc plating over steel, which handles indoor and sheltered mechanical room duty and gives moderate protection against surface rust. For sustained outdoor exposure, washdown areas, or coastal sites, specify stainless instead, since zinc plating wears and sacrifices over time.
5) How many bolts come in a jar of Metallics JG5HTB30, and is there an order minimum?
Each jar holds 100 of the 3/8-16 x 1-3/4 bolts, and the order minimum is 100 count, so one jar is the smallest buy. Jar weight is 2753 g. Metallics lists other sizes and quantities in the G5HTB and JG5HTB series by request.
6) Does this Metallics hex tap bolt meet Buy American and ARRA requirements on a federal job?
Metallics flags the JG5HTB30 as compliant for both ARRA and Buy American. Country of origin is China, so if your contract requires domestic melt and manufacture rather than the broader compliance flag, verify against your specific contract clause before submitting it.
7) What steel is used in these Grade 5 hex tap bolts?
Material standard is AISI 1008 through 1026 steel, heat treated to Grade 5 properties. That carbon range is what gets you the 105,000 psi minimum strength and the C19-30 hardness without the brittleness of a higher grade.
How fast can I get the Metallics JG5HTB30 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JG5HTB30 come with a warranty?
Absolutely. The Metallics JG5HTB30 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JG5HTB30?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JG5HTB30 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!