You may also like
Bolts 5/8-11 X 1-1/2 Hxbt SS (Jar 50)
Features
- Used in products that require general atmospheric corrosion resistance, such as chemical and food-processing equipment. Some chemical environments may require special corrosion resistant materials and precautions.
- 18-8 and 316 stainless steel cap screws are both made from austenitic alloy
Additional Notes
- Other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Arra Compliant:
- N
- Buy American Compliant:
- No
- Division:
- Electrical H1
- Fastener Head Height:
- 25/64 in.
- Fastener Head Type:
- Hex
- Fastener Head Width:
- 0.922 - 0.938 in.
- Fastener Height:
- 0.378 - 0.403
- Fastener Length:
- 1/1/02
- Fastener Width:
- 1.051 - 1.083
- Field Application:
- Electrical, Plumbing, Heating and Air Conditioning Industries
- Hardness:
- Rockwell B95-C32
- Language Code:
- EN
- Neurspe:
- https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Bolt_Dom_18-8_SS_316_SS.pdf
- Order Minimum Imperial:
- 50
- Order Minimum Uom Imperial:
- EA
- Outside Diameter:
- 0.6170 - 0.6250 IN
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Product Height:
- 7.25 in
- Product Length:
- 4.5 in
- Product Weight:
- 4209 g
- Product Width:
- 114.3 MM
- Sub Division:
- Electrical-E H2
- Tensile Strength:
- 100000 - 150000 psi minimum
- Thread Per Inch:
- 11
- Yield Strength:
- 65000 psi minimum
- Department:
- Electrical
- Product Subgroup:
- Bolts
- Product Type:
- Hexagonal Bolt
- Type2:
- Hexagonal Bolt
- Series:
- SBHC and JSBHC
- Product Details:
- Hexagonal Bolt
- Product Material:
- 18-8 Stainless Steel
Metallics JSBH912 – Frequently Asked Questions
1) What size and thread is the Metallics JSBH912 hex bolt, and will it take a standard 5/8-11 nut?
It's a 5/8-11 x 1-1/2 inch hex bolt, so 11 threads per inch on a 5/8 inch diameter, which is the standard UNC coarse pitch for 5/8. Any 5/8-11 coarse nut or tapped hole mates with it. Measured shank diameter runs 0.6170 to 0.6250 inch.
2) Is 18-8 stainless the right bolt for outdoor or washdown areas?
18-8 stainless is an austenitic alloy meant for general atmospheric corrosion resistance, which covers exterior strut runs, damp mechanical rooms, and chemical or food processing equipment. It is not the choice for chloride-heavy or aggressive chemical exposure. Coastal salt spray and harsh chemical service call for 316 stainless instead.
3) Can I use these bolts on a Buy American or ARRA-funded job?
No. The JSBH912 stainless hex bolts are not Buy American compliant and are not ARRA compliant, with country of origin listed as multiple. For federally funded work carrying domestic sourcing requirements, you'll need a domestic-origin fastener.
4) How strong is this stainless hex bolt compared to a plated grade 5?
Tensile runs 100,000 to 150,000 psi minimum with a 65,000 psi minimum yield, and hardness is Rockwell B95 to C32. That's in the same neighborhood as common medium-strength steel fasteners, but stainless is chosen here for corrosion resistance rather than for high clamp loads. For a structural connection specified at Grade 8, this is not a substitute.
5) How many bolts come in the Metallics JSBH912 jar?
Fifty bolts, packed in a jar, and 50 each is also the order minimum. The filled jar weighs 4209 g. If you need a different count or a different length in the same 5/8-11 stainless line, other sizes and quantities are available by request.
6) Does the JSBH912 hex bolt come with nuts and washers?
No. The jar contains the 5/8-11 x 1-1/2 hex bolts only. Nuts, flat washers, and lock washers are ordered separately, and in a stainless assembly you'll want matching 18-8 stainless hardware to avoid galvanic issues with the bolt.
7) How much grip length do I get with a 1-1/2 inch hex bolt?
At 1-1/2 inches overall under the head, plan on clamping roughly an inch to an inch and a quarter of material once you allow for a nut and washers. For thicker stacks, strut assemblies, or through-bolting heavier channel, step up to a longer 5/8-11 stainless bolt rather than running short thread engagement.
8) What trades typically use these Metallics stainless hex bolts?
They're stocked for electrical, plumbing, heating and air conditioning work, so think strut and hanger assemblies, equipment mounting, and pipe support where corrosion resistance matters. The part number to order is JSBH912.
How fast can I get the Metallics JSBH912 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSBH912 come with a warranty?
Absolutely. The Metallics JSBH912 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSBH912?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSBH912 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.