Metallics JBHC93PL Bolts 7/16-14 x 1 HXBT Pln-St (Jar 100)

It is a 7/16 inch diameter hex head bolt with a 1 inch length. Head type is hex, so it drives with a standard wrench or socket rather than a driver bit. Dimensions follow ASME B18.2.1-1996, the dimensional standard for square and hex bolts and screws, so head height and across-flats will match any other bolt built to that standard.

Plain steel, no coating. The finish is listed as Plain and the material as Steel, which means there is no zinc or galvanized layer to protect it. Keep these to dry interior work, inside enclosures, or anywhere you can paint or oil them. For outdoor, damp, or exterior-exposed strut and channel work, order a zinc plated or hot dip galvanized bolt of the same 7/16 x 1 size instead.

100 pieces, packed in a jar. The order minimum is 100 count, so the jar is the smallest buying unit. The packed jar weighs 5.83 lbs and measures 3.5 x 5.75 x 3.5 inches, which matters if you are loading a van bin or a shelf of shop stock.

The record flags this bolt as compliant for both ARRA and Buy American, while country of origin is listed as China. On a federally funded project those two things need to square with your specifying authority before the bolt goes in, because domestic-content rules on fasteners vary by contract. If your spec calls out a domestic-melt fastener, treat that as the controlling requirement.

No. The jar holds hex bolts only, 100 of them. Nuts, flat washers, and lock washers in 7/16 are separate line items, so add them to the order if the connection needs them. On strut and channel work with a spring nut or a threaded insert, the bolt alone may be all you need.

Yes. The JBHC93PL is one size within the Metallics BHC and JBHC hex bolt series, and other sizes and quantities are available by request. If you need a longer 7/16 bolt, a different diameter, or a count other than the 100 piece jar, ask for it against this series rather than ordering multiple jars of the wrong length.