Metallics JBHC96PL Bolts 7/16-14 x 2 HXBT Pln-St (Jar 100)

It's a 7/16 x 2 inch hex head bolt in plain steel, sold 100 to a jar. The order minimum is one jar of 100 pieces, so it's bought by the container rather than by the piece. Head type is hex, so it drives with a standard wrench or socket.

No. The finish is plain, meaning bare steel with no zinc or other corrosion coating, so these are for dry interior work only. Outdoors, in wet locations, or anywhere exposed to washdown they'll rust. For those openings choose a zinc-plated, hot-dip galvanized, or stainless hex bolt in the same 7/16 x 2 size.

Yes. The JBHC96PL hex bolts are made to ASME B18.2.1-1996, the dimensional standard for square and hex bolts and screws, so head width across flats, head height, and thread dimensions follow that spec. That's the reference to cite on a submittal when a drawing calls for standard inch-series hex bolts. Country of origin is China, which some public and institutional jobs require you to declare.

Nuts and washers are not part of the jar. You're getting 100 hex bolts only, so add 7/16 hex nuts and 7/16 flat or lock washers to the order to complete the connection. Match the plating on those to the job: bare plain steel hardware against a zinc-plated nut is fine indoors but mixes finishes.

The packed jar runs 9.06 lbs, with jar dimensions of 7.25 by 4.5 by 4.5 inches. That's a single-hand pickup that fits a standard parts-bin shelf, which is what makes jar packaging practical for a service van or an MRO crib.

Yes. The BHC and JBHC series covers other sizes and pack quantities beyond the 7/16 x 2 jar of 100, available by request. Tell us the diameter, length, and count you need and we'll pull the matching part number.