Metallics JBHC106PL Bolts 7/16-14 x 2-3/4 HXBT Pln-St (Jar 100)

It's a 7/16-14 x 2-3/4 inch hex bolt, so the shank is 7/16 inch diameter with a coarse UNC thread and the length under the head is 2-3/4 inches. Mates with any standard 7/16-14 nut or tapped hole. Dimensions follow ASME B18.2.1, which is the square and hex bolt standard, so the head will take a standard 5/8 inch wrench or socket.

No. The JBHC106PL is plain finish steel, meaning bare, uncoated steel with no zinc or galvanizing, so it will rust in wet, outdoor, or humid service. Use it for dry interior work, temporary assembly, or anywhere it gets painted or enclosed. For exterior strut, masts, meter sockets, or any damp location, specify a hot-dip galvanized or zinc plated 7/16-14 bolt instead.

100 bolts per jar, and the jar of 100 is the minimum order quantity. The jar packaging keeps loose hardware together on a service truck or in a stockroom bin rather than spilling in a bag. Metallics notes other sizes and quantities in the BHC and JBHC bolt line are available by request if 100 pieces of this size is more than the job needs.

The jar contains bolts only, 100 hex bolts of one size. Nuts, flat washers, and lock washers are separate line items, so order 7/16-14 hex nuts and 7/16 washers alongside if the connection needs them. Plan on matching the plain finish, or step up the whole stack to galvanized if the location is wet.

A full jar runs 11.25 lbs, with the pack measuring 4.5 by 4.5 by 7.25 inches. Useful to know if you are loading several sizes onto a van shelf or figuring a pallet of stockroom replenishment.

Country of origin is China. Worth knowing on federally funded work where domestic sourcing is written into the spec, since origin is the detail an inspector or submittal reviewer asks about on commodity fasteners.