Bussmann BAF-2-1/2 250V Midget...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$30.54
Bussmann BAF-2-1/2 250V Midget Fuse, 2-1/2 Amp

Bussmann BAF-2-1/2 250V Midget Fuse, 2-1/2 Amp

(No reviews yet) Write a Review

Model: BAF-2-1/2

In Stock (leaves warehouse same day if ordered before 3pm ET)

$30.54
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bussmann BAF-2-1/2 250V Midget Fuse, 2-1/2 Amp

The Bussmann BAF-2-1/2 is a 250V midget fuse rated for a precise 2-1/2 Amp (2-1/2A) load, engineered as part of the trusted Bussmann BAF Series of overcurrent protection devices. Sized to the standard midget fuse footprint, the BAF-2-1/2 is designed to drop into standard midget fuse blocks, fuse holders, and fuse-protected equipment without modification. Its 250V voltage rating makes it well suited to low-voltage control circuits, instrumentation, and general-purpose electrical equipment where dependable, code-compliant overcurrent protection is required. Whether specified for original equipment or used as a direct like-for-like replacement, the Bussmann BAF-2-1/2 is built to deliver consistent, reliable performance at its rated 2-1/2 Amp, 250V specification.

Key Features

  • Voltage Rating: 250V for standard low-voltage circuit protection applications.
  • Amperage Rating: 2-1/2 Amp (BAF-2-1/2) sized for precise overcurrent protection on the intended circuit.
  • Bussmann BAF Series: Part of the Bussmann BAF Series line of midget-style fuses.
  • Compact Midget Fuse Design: Space-saving midget fuse form factor suited for standard midget fuse blocks and holders.
  • General-Purpose Protection: Suitable for general-purpose overcurrent protection in electrical equipment and control circuits.
  • Precise Sizing: The 2-1/2 Amp rating helps guard against nuisance operation while still interrupting damaging overcurrent conditions.
  • Replacement-Ready: Rated 2-1/2A, 250V for straightforward like-for-like fuse replacement in existing midget-fuse-rated equipment.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Electrical Control Panels
  • Industrial Equipment Protection
  • General-Purpose Overcurrent Protection
  • Panelboard and Fuse Block Installations
  • Instrumentation and Low-Voltage Control Wiring
  • Renovation and Fuse Replacement Service

Why Bussmann?

Bussmann is a recognized name in circuit protection, and the BAF Series midget fuse is engineered to deliver dependable overcurrent protection at its rated 250V, 2-1/2 Amp specification. Each Bussmann BAF-2-1/2 fuse is built to consistent manufacturing standards so that electricians and maintenance teams can rely on predictable performance whether installing new equipment or replacing an existing fuse. Choose the Bussmann BAF-2-1/2 for dependable, code-compliant overcurrent protection in professional electrical installations and fuse replacement service.

Manufacturer Resources

Product Specs

list_batch:
BUSS-20260919
Product Type:
Fuse
Voltage Rating:
250V
Amperage Rating:
2-1/2A
Series:
BAF
Department:
Electrical
Product Subgroup:
Fuses
Product Group:
Circuit Protection

Bussmann BAF-2-1/2 – Frequently Asked Questions

1) Will a Bussmann BAF-2-1/2 fit a standard midget fuse holder or fuse block?
Yes. The BAF-2-1/2 is built to the standard midget fuse footprint, so it drops into standard midget fuse blocks, inline midget holders, and midget-fuse-rated equipment with no modification. Midget fuses are the 13/32 x 1-1/2 inch class, so if your block is marked for midget fuses, this one seats normally.
2) Can I use a 250V fuse like the BAF-2-1/2 on a 120V control circuit?
Yes. A fuse's voltage rating is a maximum, not a requirement, so the 250V rated BAF-2-1/2 is fine on 120V or 240V circuits. What it must not be used on is any circuit above 250V. The amp rating is the part that has to match the circuit: this one is 2-1/2A.
3) My blown fuse is marked BAF 2-1/2 - is this the same part?
It is. The part number is BAF-2-1/2, rated 2-1/2 amps at 250 volts, from the Bussmann BAF series. That is a like-for-like replacement for an existing BAF-2-1/2 in a panel or piece of equipment. Match the full marking including the amp value, since the BAF series runs across many amp ratings and only the matching amperage is a legitimate swap.
4) Is it safe to put a 2-1/2 amp fuse where a higher amp fuse was installed?
No. Never substitute a different amp rating than the equipment calls out. The BAF-2-1/2 protects at 2-1/2 amps; dropping it into a circuit specified for a higher amperage will cause nuisance opening, and going the other direction (a larger fuse in a 2-1/2A position) leaves the conductors and equipment unprotected. Match the nameplate or panel schedule value exactly.
5) What kind of circuits is the Bussmann BAF-2-1/2 intended for?
It is a general-purpose overcurrent protection fuse for low-voltage work: control panels, instrumentation and low-voltage control wiring, industrial equipment, fuse block and panelboard installations, and straight fuse replacement service on renovation calls. At 250V and 2-1/2A it suits small control and instrumentation loads rather than motor branch circuits.
6) How many fuses do I get, and should I stock spares for a control panel?
Ordering is by the single Bussmann BAF-2-1/2 fuse, one model with no size or pack options. For MRO and panel maintenance, buy quantity: midget fuses are a consumable, and crews holding a fleet of panels on 2-1/2A control circuits typically keep several on the truck so a blown fuse is not a second trip.
How fast can I get the Bussmann BAF-2-1/2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bussmann BAF-2-1/2 come with a warranty?
Absolutely. The Bussmann BAF-2-1/2 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bussmann BAF-2-1/2?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bussmann BAF-2-1/2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!