Bussmann BBS-2 Series Fast-Act...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$33.97
Bussmann BBS-2 Series Fast-Acting Midget Fuse, 2 A, 600 V

Bussmann BBS-2 Series Fast-Acting Midget Fuse, 2 A, 600 V

(No reviews yet) Write a Review

Model: BBS-2

In Stock (leaves warehouse same day if ordered before 3pm ET)

$33.97
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bussmann BBS-2 Series Fast-Acting Midget Fuse, 2 A, 600 V

The Bussmann BBS-2 Series Fast-Acting Midget Fuse from Eaton Bussmann is engineered to deliver dependable overcurrent protection in compact, space-saving Midget fuse dimensions. This fast-acting fuse is rated 2 A at 600 V and carries a 10 kAIC interrupt rating at 600 Vac, giving it the short-circuit current handling capability needed for demanding industrial, commercial, and OEM control applications. The BBS-2 features a non-indicating, Standard-type design with ferrule end x ferrule end termination for straightforward installation into compatible ferrule-style fuse blocks and holders. Nickel-plated brass endcaps provide a corrosion-resistant, low-resistance electrical contact surface, helping ensure consistent circuit protection performance over the life of the fuse.

Key Features

  • Amperage Rating: 2 A fast-acting response for reliable overcurrent protection.
  • Voltage Rating: 600 V rating supports use in higher-voltage circuit protection applications.
  • Interrupt Rating: 10 kAIC at 600 Vac for dependable short-circuit interrupting capability.
  • Response Type: Fast-acting (fast blow) operation for quick clearing of overcurrent faults.
  • Indication: Non-indicating design (does not provide blown-fuse visual indication).
  • Fuse Style: Standard-type Midget fuse construction in a compact form factor.
  • Termination: Ferrule end x ferrule end configuration for compatibility with standard ferrule-style fuse holders and blocks.
  • Endcap Finish: Nickel-plated brass endcaps for durable, corrosion-resistant electrical contact.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Overcurrent Protection in Electrical Circuits
  • Control Panels and Industrial Equipment
  • Panelboards and Distribution Equipment
  • OEM Equipment and Machine Protection
  • Ferrule-Style Fuse Blocks and Holders
  • Commercial and Industrial Electrical Systems

Why Bussmann?

Bussmann fuses from Eaton are manufactured to deliver dependable, code-compliant overcurrent protection for demanding electrical environments. The BBS-2's fast-acting response, 10 kAIC interrupt rating at 600 Vac, and nickel-plated brass endcaps reflect the durable construction and consistent performance that electrical professionals rely on. Choosing genuine Eaton Bussmann fuses helps ensure proper fit, reliable operation, and long-term circuit protection.

Manufacturer Resources

Product Specs

list_batch:
BUSS-20260919
Product Type:
Fast-Acting Fuse
Voltage Rating:
600V
Amperage Rating:
2A
Product Finish:
Nickel-Plated Brass
Configuration:
Ferrule End x Ferrule End
Series:
BBS
Department:
Electrical
Product Subgroup:
Fuses
Product Group:
Circuit Protection
Product Height:
0.41 in
Compliances:
CE Marked
Product Width:
0.41 in
Product Weight:
0.1 lb
Product Length:
1.38 in
Product Material:
Nickel-plated Brass Endcaps

Bussmann BBS-2 – Frequently Asked Questions

1) Will a Bussmann BBS-2 fit a standard midget fuse holder?
The BBS-2 is a midget-style fuse with ferrule end x ferrule end termination, so it drops into ferrule-style midget fuse blocks and holders. There are no blade or bolt tabs to accommodate, just the two endcaps clipping into the holder's spring clips.
2) Can I use a 600V fuse like the BBS-2 on a 240V or 480V control circuit?
Yes. The 600 V rating is a maximum, so the BBS-2 can be applied on any circuit at or below 600 V, including 120, 240 and 480 V control and power circuits. What you cannot do is go the other way and put a lower-voltage fuse on a 600 V circuit.
3) Is the BBS-2 fast-acting or time-delay, and does that matter for a motor load?
Fast-acting, sometimes called fast-blow. It clears overcurrents quickly, which suits control circuits, instrumentation, semiconductor and resistive loads. For a motor or transformer with a high inrush, a fast-acting 2 A fuse will likely open on startup; those loads want a time-delay midget fuse instead.
4) Does the BBS-2 show when it has blown?
No. It is a non-indicating, standard-type fuse, so there is no pop-up pin or window to tell you it has opened. You will need a meter or a fuse holder with blown-fuse indication to confirm the fuse rather than the load. On panels where fast troubleshooting matters, buyers often spec an indicating holder for that reason.
5) What part number do I order for a 2 amp 600 volt Bussmann midget fuse?
Order Bussmann part number BBS-2. The BBS designation is the fast-acting midget series, and the trailing number is the amp rating, so BBS-2 is the 2 A, 600 V version.
6) Is the BBS-2 suitable for a machine control panel an OEM is building?
That is one of its main uses. The combination of a compact midget body, 600 V rating and 10 kAIC interrupting capacity covers control panels, panelboards, distribution gear and OEM machine protection. The 2 A rating is sized for control transformers' secondary circuits, instrumentation and small electronic loads rather than motor branch circuits.
7) Why does the BBS-2 use nickel-plated brass endcaps instead of plain tin?
The nickel plating over brass gives a corrosion-resistant, low-resistance contact face at the fuse clip. That matters in humid plants, washdown areas and outdoor enclosures, where a tarnished endcap raises contact resistance, runs hot and causes nuisance openings.
How fast can I get the Bussmann BBS-2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bussmann BBS-2 come with a warranty?
Absolutely. The Bussmann BBS-2 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bussmann BBS-2?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bussmann BBS-2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!