Martin 66-1/2 in. Freestanding Acrylic Tub in Glossy White with White Drain
Featuring a modern take on the classic double-slipper silhouette, our Martin 66-1/2 in. freestanding acrylic tub includes a fluidly integrated deck to accommodate your favorite tub filler. The perfect centerpiece for any master retreat. Proudly made in the USA.
FEATURES
- Constructed of crosslinked cast acrylic, thermoformed and reinforced with hand rolled fiberglass & titanium enhanced resin, in a glossy white finish
- Soaking depth of 16-3/4 in. with a 80 gal. capacity
- Features an integrated faucet deck
- equipped with a removable panel to access valves and drain
- Includes pre-leveled foam base and white integrated slotted overflow with matching toe-tap drain
- Made in the USA
SPECIFICATIONS
Product Type: Soaking
Finish: Glossy White
InstallationType: Freestanding
Product Width: 36
Basin Depth: 16.75
Basin Length: 43.75
Basin Width: 23.25
Capacity: 80
Collection: Martin
Color Family: White
Country Of Origin: United States
Drain Placement: Center
Faucet Type: Deck Mount
Material: Acrylic
MFG SKU: CAFTMAR67
Overflow Drain: Included
Overflow Height: 16.75
Product Height: 23-1/2
Product Length/Depth: 66-1/2
Product Weight: 125
Soaking Depth: 16-3/4 in.
Tub Shape: Oval
Manufacturer Resources
Product Specs
- Basin Depth:
- 16.75"
- Basin Length:
- 43.75"
- Basin Width:
- 23.25"
- Collection:
- Martin
- Country Of Origin:
- United States
- Drain Placement:
- Center
- InstallationType:
- Freestanding
- Product Height:
- 23-1/2"
- Product Length/Depth:
- 66-1/2"
- Product Weight:
- 125 lbs.
- Product Width:
- 36"
- Tub Shape:
- Oval
- Warranty:
- Limited Lifetime Residential Warranty
- Product Material:
- Acrylic
- Product Category:
- Soaking
- Department:
- Plumbing
Cahaba CAFTMAR67 – Frequently Asked Questions
1) What footprint do I need to frame for the Cahaba Martin freestanding tub?
The Martin CAFTMAR67 measures 66-1/2 in. long, 36 in. wide, and 23-1/2 in. tall overall. Since it's freestanding, plan clearance on all four sides for the finished alcove or open floor area, not just a 66-1/2 in. wall-to-wall run.
2) Where does the drain rough-in go on the Cahaba Martin 66-1/2 in. tub?
Center drain. The waste lands mid-length of the tub rather than at either end, so the rough-in sits under the middle of the 66-1/2 in. body. A removable access panel gets you to the valves and drain after the tub is set.
3) Can I use a freestanding floor-mount tub filler with the Cahaba Martin tub?
The Martin is built around a deck-mounted filler, not a floor-mount one. It has an integrated faucet deck cast into the tub to carry the spout and valves, so pick a deck-mount tub filler sized for that deck.
4) Does the Cahaba Martin tub need a separate leveling frame or mortar bed?
No. It ships with a pre-leveled foam base, so it sets directly on a flat finished floor without a mortar bed or shimming frame. Get the subfloor flat first, since the base takes its level from what's under it.
5) Does the Cahaba Martin freestanding tub come with a drain and overflow, or do I order those separately?
Both are included. You get a white integrated slotted overflow with a matching white toe-tap drain, so there's no separate waste-and-overflow kit to source. The finish is white to match the glossy white tub, not chrome or brushed nickel, so if your spec calls for a metal-finish drain this one won't match it.
6) How deep can you actually soak in the Cahaba Martin tub?
Soaking depth is 16-3/4 in., with the overflow set at that same height, and the tub holds 80 gallons. That's a genuine shoulder-deep soak rather than a shallow bathing tub, which is the point of the double-slipper shape.
7) Is the Cahaba Martin tub light enough to set without a crew or a structural check?
The tub itself is 125 lbs. empty, which is typical handling for acrylic and a two-person set. What matters more for the floor is the filled load: 80 gallons of water plus a bather on top of the 125 lb. shell. On upper floors or older framing, that's worth running past the structural drawings.
8) What is the inside bathing area of the Cahaba Martin tub?
The basin runs 43-3/4 in. long by 23-1/4 in. wide by 16-3/4 in. deep. That interior is noticeably shorter than the 66-1/2 in. exterior because the double-slipper ends and the integrated faucet deck take up the difference.
9) Is the Cahaba Martin tub thin acrylic or a reinforced shell?
It's crosslinked cast acrylic, thermoformed and then reinforced with hand-rolled fiberglass and a titanium-enhanced resin backing, finished glossy white. That backed construction is what gives the walls their rigidity, unlike an unreinforced vacuum-formed sheet tub.
10) Is the Cahaba Martin tub made domestically for projects with US-sourcing requirements?
Country of origin is the United States. For public-sector or institutional jobs carrying domestic sourcing language, that's the origin on record for the CAFTMAR67.
How fast can I get the Cahaba CAFTMAR67 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Cahaba CAFTMAR67 come with a warranty?
Absolutely. The Cahaba CAFTMAR67 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Cahaba CAFTMAR67?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Cahaba CAFTMAR67 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.