You may also like
Martin 60 in. Freestanding Acrylic Tub in Glossy White with White Drain
Featuring a modern take on the classic double-slipper silhouette, our Martin 60 in. freestanding acrylic tub includes a fluidly integrated deck to accommodate your favorite tub filler. An ideal solution for retrofits and areas with limited space. Proudly made in the USA.FEATURES
- Constructed of crosslinked cast acrylic, thermoformed and reinforced with hand rolled fiberglass & titanium enhanced resin, in a glossy white finish
- Soaking depth of 15 in. with a 67 gal. capacity.
- Features an integrated faucet deck
- equipped with a removable panel to access valves and drain
- Includes pre-leveled foam base and white integrated slotted overflow with matching toe-tap drain
- Made in the USA
SPECIFICATIONS
Product Type: Soaking Finish: Glossy White InstallationType: Freestanding Product Width: 32 Basin Depth: 15 Basin Length: 39 Basin Width: 18 Capacity: 67 Collection: Martin Color Family: White Country Of Origin: United States Drain Placement: Center Faucet Type: Deck Mount Material: Acrylic MFG SKU: CAFTMAR60 Overflow Drain: Included Overflow Height: 15 Product Height: 21-1/2 Product Length/Depth: 60 Product Weight: 120 Soaking Depth: 15 in. Tub Shape: Oval Warranty: Limited lifetime residential warranty Specification SheetManufacturer Resources
Product Specs
- Basin Depth:
- 15"
- Basin Length:
- 39"
- Basin Width:
- 18"
- Collection:
- Martin
- Country Of Origin:
- United States
- Drain Placement:
- Center
- InstallationType:
- Freestanding
- Product Height:
- 21-1/2"
- Product Length/Depth:
- 60"
- Product Weight:
- 120 lbs.
- Product Width:
- 32"
- Tub Shape:
- Oval
- Warranty:
- Limited Lifetime Residential Warranty
- Product Material:
- Acrylic
- Product Category:
- Soaking
- Department:
- Plumbing
Cahaba CAFTMAR60 – Frequently Asked Questions
1) Will a 60 inch Cahaba Martin freestanding tub fit a standard 60 inch alcove space?
The Martin CAFTMAR60 measures 60 inches long by 32 inches wide by 21-1/2 inches high, so it consumes the full 60 inch run of a standard alcove with nothing to spare. It is a freestanding tub, meaning all four sides are finished and it is not designed to tuck under a tiled apron wall. If you are dropping it into a former alcove, plan on the 32 inch width clearing your studs and on finishing the wall down to the floor behind it. Cahaba positions the Martin for retrofits and tight rooms for exactly this reason.
2) Where does the drain rough-in go on the Cahaba Martin 60 in. freestanding tub?
Center drain. The waste line needs to come up at the midpoint of the 60 inch length, not at either end, so an existing end-drain rough-in from an alcove tub will not line up without moving the pipe. The Martin does include a removable access panel that gets you to the valves and the drain after the tub is set, which matters because a freestanding tub with a foam base otherwise buries the connection.
3) Do I need a floor mount tub filler for the Cahaba Martin, or can I mount the faucet on the tub?
The Martin has an integrated faucet deck built into the tub, so it takes a deck mount filler and you do not need a floor mounted freestanding faucet or a wall supply. That deck is the reason this tub works in a retrofit where you would otherwise have to run supplies up through the floor. Buy the filler as a deck mount trim; the tub ships with the drain and overflow but not with a faucet.
4) Does the Cahaba Martin freestanding tub come with a drain and overflow, or do I order those separately?
Both are included and both are white to match the tub. You get an integrated slotted overflow and a matching toe-tap drain, so there is no separate drain kit to spec and no finish mismatch to manage. What you still need to buy is the deck mount tub filler and the trap and waste to tie into the floor rough-in.
5) How deep is the water in the Cahaba Martin tub, and is it deep enough for a real soak?
Soaking depth is 15 inches, set by the overflow height at 15 inches, with a basin depth of 15 inches. On a double slipper shape like this the raised ends let you recline against a backrest rather than sit upright, so 15 inches of water covers most of an average adult. It is a dedicated soaking tub, not a whirlpool or air bath.
6) Does the Cahaba Martin tub need a mortar bed or a leveling base set underneath it?
No mortar bed. The Martin ships with a pre-leveled foam base already fitted, so it sets directly on a level finished floor. That saves the wet set step you would do under a cast iron or steel tub and makes it a faster install on an occupied unit. The floor still has to be level and sound; the base levels the tub, not the room.
7) How durable is an acrylic freestanding tub compared with a thin acrylic shell, and will it flex underfoot?
The Martin is crosslinked cast acrylic that is thermoformed and then reinforced with hand rolled fiberglass and titanium enhanced resin. That backing is what stops the floor of the tub from flexing when someone steps in, which is the usual complaint against unreinforced vacuum formed shells. Surface is glossy white acrylic, so it is repairable with an acrylic polish or repair kit rather than needing refinishing the way porcelain over steel does.
8) Is the Cahaba Martin tub made in the USA? I have a domestic sourcing requirement on this project.
Country of origin is the United States. Cahaba builds the Martin domestically, which is the answer institutional and government buyers usually need on the front end of a specification. The model number to put on the submittal is CAFTMAR60.
9) I am replacing tubs across several units. Is the Cahaba Martin the same in every unit, or are there options to specify?
There is one configuration: glossy white, model CAFTMAR60, 60 inches long. No finish choices, no drain location options, no left or right hand. For fleet work that is the useful part, since every unit gets an identical 60 by 32 inch footprint with a center drain and the same 15 inch soaking depth, so one rough-in detail and one filler selection covers the whole building.
10) Can I put a shower over the Cahaba Martin freestanding tub?
It is built as a soaking tub with an integrated deck for a deck mount filler, so it is not set up for a shower riser or a wall diverter. There is no surround flange to seal against a tiled wall either, since all four sides are finished for freestanding placement. If the opening needs to serve as a tub and shower, spec an alcove tub with an integral tile flange instead of the Martin.
How fast can I get the Cahaba CAFTMAR60 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Cahaba CAFTMAR60 come with a warranty?
Absolutely. The Cahaba CAFTMAR60 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Cahaba CAFTMAR60?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Cahaba CAFTMAR60 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.