You may also like
Cahaba CA221132 Undermount 32 in. 50/50 Bowl Radius Corner 16 Gauge Stainless Steel Kitchen Sink
Model: CAH-CA221132
Undermount 32 in. 50/50 Bowl Radius Corner 16 Ga. Stainless Steel Kitchen Sink
A home chef's dream, our luxurious 32 in. 50/50 bowl radius corner stainless steel kitchen sink features two generously...
Cahaba
$753.00
$564.75
32 In. Micro Radius 50/50 Double Bowl Undermount 16 Ga. Stainless Steel Kitchen Sink
Combines aesthetics with functionality, featuring a 50/50 split and micro radius corners in a tough 16-gauge stainless steel frame, suitable for both cooking and cleaning tasks.
SPECIFICATIONS
Product Type: Kitchen Sinks
Finish: Brushed Stainless
InstallationType: Undermount
Number of Bowls: 2
Bowl configuration: 50/50
Product Width: 18-1/2
Basin Depth:10
Basin Depth (Left): 10
Basin Depth (Right): 10
Basin Length: 32
Basin Length (Left): 14.5
Basin Length (Right): 14.5
Basin Width: 18
Basin Width (Left): 16
Basin Width (Right): 16
Bowl Shape: Rectangle
Country Of Origin: China
Drain Placement: Rear
Gauge: 16
Includes Basin Rack: No
Includes Mounting Hardware: No
Material: Stainless Steel
MFG SKU: CAHCASS325050UMDB-M
Minimum Cabinet Size (in): 36 In
Product Height: 9
Product Length/Depth: 32-1/4
Product Weight: 40
Manufacturer Resources
Product Specs
- Basin Depth:
- 10"
- Basin Depth (Left):
- 10"
- Basin Depth (Right):
- 10"
- Basin Length:
- 32"
- Basin Length (Left):
- 14.5"
- Basin Length (Right):
- 14.5"
- Basin Width:
- 18"
- Basin Width (Left):
- 16"
- Basin Width (Right):
- 16"
- Bowl Configuration:
- 50/50
- Bowl Shape:
- Rectangle
- Drain Placement:
- Rear
- Gauge:
- 16
- Includes Basin Rack:
- No
- Includes Mounting Hardware:
- No
- InstallationType:
- Undermount
- Minimum Cabinet Size (in):
- 36 In
- Number of Bowls:
- 2
- Product Height:
- 9"
- Product Length/Depth:
- 32-1/4"
- Product Weight:
- 40 lbs.
- Product Width:
- 18-1/2"
- Warranty:
- Limited Lifetime Residential Warranty
- Product Material:
- Stainless Steel
- Product Category:
- Kitchen Sinks
- Department:
- Plumbing
Cahaba CASS325050UMDB-M – Frequently Asked Questions
1) Does the Cahaba CASS325050UMDB-M sink come with mounting clips or a bottom grid?
No on both. Mounting hardware is not included and neither is a basin rack, so order undermount clips and epoxy anchors plus a bottom grid separately if you want them. Budget for strainers too if you are quoting the job complete.
2) How deep are the bowls on the Cahaba 32 inch 50/50 undermount sink, and will a disposal still fit?
Both bowls run 10 inches deep, with an overall sink height of 9 inches at the body. Drains are placed at the rear of each bowl, which pushes the tailpiece and trap toward the back wall and leaves usable clearance under the front of the cabinet for a disposal, filter canister, or storage.
3) Can this Cahaba sink be installed as a drop-in on a laminate countertop?
No. It is built as an undermount only, so it needs a solid surface top, granite, quartz, or similar, with a finished cutout edge. There is no deck rim to rest on a laminate top and no faucet holes drilled in the sink, which means the faucet and any soap dispenser or air switch get bored through the countertop.
4) Is 16 gauge stainless steel heavy enough for a rental unit or multi-family kitchen?
Yes. At 16 gauge this is the heavier end of residential stainless, thicker than the 18 and 20 gauge sinks common in builder-grade packages, which means less flex and less noise under a disposal. The brushed stainless finish hides scratches and waterspots better than a mirror polish, which is what you want across a fleet of units.
5) What drain opening does the Cahaba CASS325050UMDB-M take, and how many strainers do I need?
Two drains, one in each bowl, positioned at the rear. Each takes a standard 3-1/2 inch kitchen sink strainer opening, so spec two strainers, or one strainer and one disposal flange if you are putting a disposal under one side.
6) What are micro radius corners and do they make the sink harder to clean?
Micro radius means the corners inside the bowls are cut to a tight, near-square radius rather than a wide sweep, which squares off the usable bowl space. They are not a zero radius, so there is still a small curve for a sponge or brush to follow. Combined with a rear drain the water still carries to the back corner without pooling.
7) Where is the Cahaba CASS325050UMDB-M kitchen sink made?
Country of origin is China. Worth knowing up front if you are bidding public or government work with domestic sourcing requirements on the specification.
How fast can I get the Cahaba CASS325050UMDB-M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Cahaba CASS325050UMDB-M come with a warranty?
Absolutely. The Cahaba CASS325050UMDB-M is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Cahaba CASS325050UMDB-M?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Cahaba CASS325050UMDB-M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.