Cahaba CASS325050UMDB-S-18 32 In. Standard Radius 50/50 Double Bowl Undermount 16 Ga. Stainless Steel Kitchen Sink

No. The CASS325050UMDB-S ships without mounting hardware, so the fabricator or installer supplies the undermount clips, studs and epoxy. A basin rack is not included either. Budget both into the job.

No. The CASS325050UMDB-S is built as an undermount only, so it needs a countertop that can carry a cut opening with a finished edge, typically stone or solid surface. Laminate tops are not a candidate unless the fabricator builds a purpose-made undermount detail. For a laminate counter, specify a top-mount sink with a finished rim instead.

Both bowls are 9 inches deep, left and right the same. Each bowl measures 14-5/8 inches long by 16-1/2 inches wide, rectangular. At 9 inches you get real capacity for stock pots, but check your disposal and trap height in the cabinet before you commit, since the drains sit at the rear of each bowl.

The drains on this Cahaba double bowl sit at the rear of each bowl rather than center. That pushes the tailpiece and trap toward the back of the cabinet, which frees up usable storage underneath and generally lines up better with an existing wall rough-in. It also means water drains away from where you stack dishes. Worth confirming your waste arm height, because a 9 inch deep bowl plus a disposal eats vertical space.

For units that turn over, yes. This sink is 16 gauge stainless steel, which is the thicker end of what gets sold for residential kitchens, so it resists denting from dropped cookware and is noticeably less prone to the oil-can flex and noise you get from 18 or 20 gauge bowls. The finished sink weighs 25 pounds, which tells you there is real metal in it.

Three things are not in the box. Undermount mounting hardware, clips and anchors are not included. No basin rack is supplied. And the sink ships without drain assemblies or a faucet, so specify your strainers or disposal flange, tailpieces and trap kit to suit the rear drain locations, plus the faucet, since an undermount puts all deck holes in the countertop rather than the sink.

Standard radius corners, which is what this Cahaba sink has, are curved where the bowl walls meet the base. Zero radius corners are square and give a sharper modern look but trap debris in the tight angle. The curved corners here wipe out with a sponge and no corner tool, which is why they get specified for rentals and busy kitchens where cleaning is on someone else's clock.

Brushed stainless, and that is the only finish it comes in. It reads the same as a typical brushed or satin stainless range and dishwasher front, so it blends across an appliance package without the mirror glare of a polished sink. On an undermount the rim is hidden anyway, so what you see is the bowl interior.

Cahaba lists it as CASS325050UMDB-S. The designation decodes to a 32 inch stainless sink, 50/50 bowl split, undermount double bowl. If you are matching across several units in a building, that is the number to repeat on the order so you get identical 9 inch deep bowls every time.