Cahaba CAVT25 25 in. x 22 in. Quartz Vanity Top with Ceramic Basin

Yes. The CAVT25 quartz top measures 25 inches wide by 22 inches front to back, which gives the usual half inch overhang on each side of a 24 inch cabinet. It drops directly onto most standard 24 inch vanity bases, and the minimum cabinet size is 21 inches, so it will also cover a 21 or 22 inch box with a larger overhang.

The bowl comes pre-attached. The CAVT25 ships as a pre-assembled unit with an oval vitreous china basin already mounted and a matching backsplash included, so on the job it is a set-and-plumb install rather than a sink-setting job. Mounting hardware is included as well.

It arrives drilled for a single hole faucet, but pilot holes are set for an optional 8 inch widespread, so the two outer holes can be opened up if you are running a widespread trim. Order the faucet knowing that: single hole works out of the box, widespread takes a bit of field work on the pilots.

Drain placement is to the rear of the bowl. The basin itself is 15 inches wide by 12 inches long with a 6 inch depth, so the tailpiece drops well back toward the wall rather than at the cabinet centerline front to back. On a remodel that usually works in your favour with an existing wall rough-in, but check your trap arm height against the 6 inch bowl depth before you commit.

Three quartz colors: Morning Frost, Broadway Black, and Rocky Mountain, all in a polished finish. For multi-unit work where you want every bathroom to match, pick one color and order the whole run against it, since the shade is part of the quartz slab and not a coating.

It is engineered quartz, stain resistant and scratch resistant, and it needs no sealing, which is the practical difference from natural stone in a turnover unit. The basin is vitreous china, so routine bathroom cleaners are fine. No annual sealing visit is part of the maintenance plan.

Yes, an overflow is included, set at a 4 inch height in the bowl. That matters when you spec the drain assembly: you need a lavatory pop-up or grid drain with an overflow passage, not a solid-body unit made for overflow-less vessel bowls.

The backsplash is included and matches the top. A coordinating sidesplash is a separate order, part number CASSMF21, which is what you want if the vanity runs into a wall on one end. Add it to the order up front rather than discovering the gap at trim-out.

It weighs 50 lbs with the china bowl attached. That is a two-person lift in practice, mostly because of the span and the attached basin rather than the raw weight, and the polished quartz edge is what you do not want to set down hard.

The top installs as a drop-in onto the cabinet, with the china bowl mounted from beneath the quartz so the deck reads as one clean surface with no exposed bowl rim. Because the bowl is already bonded at the factory, there is no undermount clamping or sealing work for the installer. Overall height with the backsplash is 8-1/4 inches.

The top is fabricated in the United States from Daltile ONE Quartz. The oval vitreous china bowl bonded to it is imported, so if you are answering a domestic-content question on a government or institutional order, the quartz top is US-made and the basin is not.