Cal-Royal MTR-01 Basic Radio K...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$407.78
Cal-Royal Cal-Royal MTR-01 Basic Radio Kit, 2 Transmitters and 1 Receiver at 433 MHz, 8600 Series MTR-01

Cal-Royal MTR-01 Basic Radio Kit with 2 Transmitters and 1 Receiver, 433 MHz, 8600 Series

(No reviews yet) Write a Review

Model: MTR-01

In Stock (leaves warehouse same day if ordered before 3pm ET)

$407.78
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Cal-Royal MTR-01 Basic Radio Kit with 2 Transmitters and 1 Receiver, 433 MHz, 8600 Series

The Cal-Royal MTR-01 Basic Radio Kit is an FCC-approved wireless solution designed to eliminate the hassle of running wires from an actuator to a controller. This 8600 Series accessory kit includes one 433 MHz receiver and two 433 MHz transmitters, providing a straightforward radio-based connection for compatible door operator systems. The kit is engineered for use with the 8636-SW and 8637-SW for conversion or replacement, making it a practical solution for facilities looking to simplify installation or upgrade existing wired setups to a wireless configuration.

Key Features

  • Wireless Radio Kit: Eliminates the hassle of wiring from actuator to controller, simplifying installation and reducing labor.
  • 433 MHz Frequency: Both the receiver and transmitters operate at 433 MHz for reliable wireless communication between components.
  • Complete Kit Contents: Includes (1) receiver and (2) transmitters, both at 433 MHz, for a ready-to-install wireless pairing.
  • Conversion or Replacement Compatibility: Designed for use with 8636-SW and 8637-SW for conversion or replacement applications.
  • 8600 Series Integration: Part of the Cal-Royal 8600 Series, supporting consistent compatibility across the product line.
  • Electronic Access Control Accessory: Classified as an Electronic Access Controls part and accessory for door closer support systems.

Certifications & Compliance

  • Federal Communications Commission (FCC) Approved

Technical Specifications

  • Series: 8600 Series
  • Product Group: Electronic Access Controls
  • Product Subgroup: Parts and Accessories
  • Product Type: Parts and Accessories
  • Subcategory: Door Closers Accessories
  • Commercial/Residential: Commercial
  • Electronic: Yes
  • Product Category: Electronic Access Controls
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Government and Municipal Buildings

Why Cal-Royal MTR-01?

Cal-Royal 8600 Series accessories like the MTR-01 Radio Kit are built to support reliable, FCC-approved wireless operation for compatible door operator systems. By pairing a 433 MHz receiver with two 433 MHz transmitters, this kit offers a straightforward path for converting or replacing wired connections on 8636-SW and 8637-SW installations, helping commercial facilities streamline installation while maintaining dependable performance.

Product Specs

Series:
8600 Series
Product Group:
Electronic Access Controls
Product Subgroup:
Parts and Accessories
Product Type:
Parts and Accessories
Subcategory:
Door Closers Accessories
Commercial/Residential:
Commercial
Electronic:
Yes
Product Model:
MTR-01
Product Category:
Electronic Access Controls
Department:
Door Hardware

Cal-Royal MTR-01 – Frequently Asked Questions

1) What comes in the Cal-Royal MTR-01 radio kit?
The MTR-01 Basic Radio Kit ships with one 433 MHz receiver and two 433 MHz transmitters. That covers two actuator locations (interior and exterior push plates, for example) talking to a single receiver at the operator. If you need more than two actuator points, you would need additional transmitters beyond what the kit contains.
2) Which Cal-Royal door operators does the MTR-01 radio kit work with?
Cal-Royal lists the MTR-01 for use with the 8636-SW and 8637-SW, either as a conversion from a wired actuator connection or as a replacement for an existing radio setup. It is part of the 8600 Series accessory line. For operators outside that pairing, confirm the operator model before ordering.
3) Can I add a wireless push plate to my Cal-Royal 8600 operator without running wire through the jamb?
That is exactly what the MTR-01 is for. The kit removes the wire run from the actuator back to the controller, so a push plate on a remote wall or an opposite-side jamb communicates by 433 MHz radio instead. It cuts the conduit and fishing labor on a retrofit where the wall is already finished.
4) Is there another wireless kit that can replace a wired run from a touchless actuator, or is the Cal-Royal MTR-01 the only option?
The Cal-Royal MTR-01 is a 433 MHz radio kit supplied with one receiver and two transmitters, built to remove the wire run from an actuator to a controller on 8636-SW and 8637-SW door operator installations. If the opening uses LCN jamb mount touchless actuators instead, the LCN 8310-3803 is a 3V wireless conversion kit made for that application. Both take a wired actuator connection to a wireless one, but each is tied to its own operator and actuator family, so match the kit to the operator brand already on the door rather than treating them as interchangeable.
5) Is the Cal-Royal MTR-01 radio kit FCC approved for commercial buildings?
The MTR-01 is FCC approved and Cal-Royal rates it as a commercial product. It shows up on office buildings, schools, healthcare, retail, warehouse, and government work where a low energy operator needs a wireless actuator link.
6) Is the MTR-01 a card reader or access control credential?
No. The MTR-01 is a radio link between an actuator and a door operator controller, not a credential system. If you are after credentials for an access control head end, that is a different part, for example DynaLock's 7551 proximity card or 7561 proximity tag. The MTR-01 only carries the open signal to the operator.
7) Instead of going wireless, can I just run the actuator signal through the door with a transfer device?
That is a different approach to the same problem. The Cal-Royal MTR-01 removes the run entirely by pairing a 433 MHz receiver with two 433 MHz transmitters between actuator and controller. If you would rather keep a hard-wired path and only need to get conductors across the door edge, the RCI 9500/9501 series mortise pin transfer is a tamper-resistant transfer rated 1.5A at 24VAC. The pin transfer carries wire through a door; it does not create a wireless link, so it is an alternative wiring method rather than a substitute for the radio kit.
8) Is a request-to-exit kit the same kind of accessory as the Cal-Royal MTR-01?
No. The MTR-01 is a radio kit of one receiver and two transmitters at 433 MHz that links an actuator to a door operator controller without wire. A request-to-exit kit is a switch that reports the lock or exit device being operated: the Command Access CRSREXKIT-ED is a field installable REX kit with an SPDT switch for Cal Royal 22/98 and Sargent 80 series exit devices, and the Command Access REX-KIT-ML is a field installable REX kit for ML1-series mortise locks. Those send a contact signal from the hardware; they do not actuate or wirelessly trigger a door operator.
9) Can the MTR-01 be used as a request-to-exit signal on an exit device?
No, it is a door operator accessory, not a REX switch. Request to exit on exit devices is handled by field installable switch kits such as the Command Access CRSREXKIT-ED for Cal Royal 22/98 and Sargent 80 Series, or the REX-KIT-ML for ML1-Series mortise locks. The MTR-01 replaces the actuator wiring on 8636-SW and 8637-SW operators.
10) If I am standardizing wireless actuators across a building, does ordering the MTR-01 keep everything on one frequency?
Yes. Every receiver and transmitter in the kit runs at 433 MHz, so openings equipped with MTR-01 kits stay on a single frequency across the facility. That matters for a property manager or facilities group keeping one spare part on the shelf instead of a mix of radio types per door.
11) My actuator side is fine but I need to distribute the output to several devices. Does the MTR-01 do that?
The Cal-Royal MTR-01 is a point-to-point radio kit: one 433 MHz receiver paired to two 433 MHz transmitters so an actuator can signal a controller without a wire run. It is not a distribution device. Where one input has to drive multiple outputs, the Locknetics RDB4 is a 4-output relay distribution board. The two can sit in the same system without competing, since the radio kit handles the actuator link and the relay board handles the output fan-out.
12) Does the MTR-01 give me power for the wireless devices, or do I need a transformer too?
The Cal-Royal MTR-01 supplies the radio link itself, one 433 MHz receiver and two 433 MHz transmitters for 8636-SW and 8637-SW conversion or replacement work, and it is FCC approved. It is not a power supply. Where a low voltage source is needed on the same job, the Adams Rite 4605 is a transformer taking 115 VAC to 12/24 VAC with a 40 volt-amp output. Confirm the operator's own power provisions before adding one, since these are separate items serving separate purposes.
How fast can I get the Cal-Royal MTR-01 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Cal-Royal MTR-01 come with a warranty?
Absolutely. The Cal-Royal MTR-01 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Cal-Royal MTR-01?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Cal-Royal MTR-01 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!