You may also like
Callan Edgewood Keyed Entry Single Cylinder Door Knobset
Keyed Entry Function: Keyed entry knobs and levers are able to be locked from the exterior with a key, and then locked or unlocked from the inside with a turn-button.
Features:
- Meets BHMA security grade 2 requirements
- Made of durable zinc
- Fully reversible handing for left or right handed applications
- Designed for an easy one person installation
- Comes standard with a round corner latch faceplate and 1/2" throw
- Includes a limited lifetime warranty on mechanical parts and a five year warranty on finish
Specifications:
- Backset: Adjustable 2-3/8" or 2-3/4"
- Cross Bore: 2-1/8"
- Edge Bore: 1"
- Door Thickness: 1-3/8" to 1-3/4"
- Handing: Reversible Left or Right
- Projection: 2-5/8"
- Latch Faceplate: Round Corner
- Cylinder: 5 Pin KW1
- Concealed Screws: No
- Material: Zinc
Manufacturer Resources
Product Specs
- Subcategory:
- Bored Locksets
- Series:
- Edgewood
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Residential
- Lock Function:
- Entrance
- Product Type:
- Knobsets
- Grade:
- Grade 2
- Product Attribute:
- Cylindrical Locks
- Product Function:
- Entrance
- Product Category:
- Mechanical Locks
- Department:
- Door Hardware
Callan G2KE1001 – Frequently Asked Questions
1) Will the Callan Edgewood entrance knobset fit a 1-3/8 inch interior door and a 1-3/4 inch exterior door?
Both. The Edgewood keyed entry knobset is rated for doors from 1-3/8 to 1-3/4 inches, which covers the standard 1-3/4 inch exterior slab and the thinner 1-3/8 inch doors common in older homes. The backset adjusts between 2-3/8 and 2-3/4 inches, so it lands on either of the two standard bore positions without ordering a different latch.
2) Can I drop the Callan Edgewood knob into the holes already bored in my door?
If the door is bored to the standard 2-1/8 inch cross bore with a 1 inch edge bore, the Edgewood goes straight in. Those are the two holes that matter, and they are the same prep used by most residential cylindrical knobs. Check the backset on the existing hole, 2-3/8 or 2-3/4 inches from the door edge to the center of the big hole; the Edgewood latch adjusts to either.
3) Do I need to order a left hand or right hand version of the Callan Edgewood knobset?
No handing to specify. The Edgewood is fully reversible and works on a left or right hand door as shipped, so one part number covers every opening in the building. That also means you can stock one item for a whole property instead of splitting inventory by swing.
4) Will the Callan Edgewood latch catch my existing strike plate?
The Edgewood ships with a 1/2 inch throw latch and a round corner faceplate. A 1/2 inch throw is the normal residential deadlatch projection, so an existing strike in a standard frame will catch it. The faceplate is round corner, not square, so if the mortise in your door edge was cut square you will need to square off the pocket corners or file the corners of the mortise.
5) Can I key the Callan Edgewood knobs alike to the rest of my Kwikset or Schlage locks?
Yes, within the keyway you pick. The Edgewood takes a 5 pin cylinder and is orderable in either KW1 (the Kwikset keyway) or SC1 (the Schlage keyway), so it can be brought onto an existing key. Keying is selected at order time as keyed different or keyed alike. If you want a set of doors on one key, choose keyed alike and use the same keyway across the order.
6) Is the Callan Edgewood knobset strong enough for an apartment or commercial entry door?
The Edgewood meets BHMA Grade 2 security requirements and is built as residential hardware in zinc. That is a step above the Grade 3 knobs common at the hardware store, and it suits apartment doors and light rental use. For a commercial opening with real traffic, step up to a Grade 1 entrance knob such as the BEST 8K Series heavy duty entrance lock, or a Grade 1 Corbin Russwin CK4851 entrance/office knob.
7) Is the Callan Edgewood a direct swap for a builder grade Kwikset entry knob?
In most cases yes. A Kwikset 400P-CP Polo keyed entry knob covers the same 1-3/8 to 1-3/4 inch door range and uses the same standard cylindrical prep the Edgewood needs, a 2-1/8 inch cross bore with a 1 inch edge bore. Order the Edgewood in the KW1 keyway and your existing Kwikset keys can be carried across on a keyed alike order. The Edgewood is Grade 2 where the 400P-CP is Grade 3.
8) What is the closest keyed entry knob to the Callan Edgewood if I want the same Grade 2 entrance function from a different brand?
The Dexter C2000 Series entry/office cylindrical ball knob lock is the nearest match: it is a Grade 2 keyed knob with an entrance/office function and fits doors 1-3/8 inch to 1-3/4 inch, the same door thickness range the Callan Edgewood covers. The Edgewood is a Grade 2 entrance knobset in zinc with an adjustable 2-3/8 inch or 2-3/4 inch backset and a 5 pin KW1 cylinder; the Dexter uses a ball knob and is described as non-clutching. Both give you a key outside and a turn button style inside function on a standard 2-1/8 inch cross bore prep.
9) The Callan Edgewood is a residential knob - what should I put on a high traffic commercial entry instead?
Step up to the BEST 8K Series entrance function single cylinder knob lock, which is Grade 1 heavy duty with an entrance function, or the Corbin Russwin CK4851 entrance/office cylindrical lock with a Global knob and conventional cylinder, which carries a Grade 1 rating and takes doors 1-3/8 inch to 2 inch. The Callan Edgewood is a Grade 2 knobset classed for residential use, so on an opening that sees constant public traffic the Grade 1 heavy duty bodies are the ones specified.
10) My door is 2 inches thick - will the Callan Edgewood knobset work, or do I need something else?
The Callan Edgewood covers door thicknesses of 1-3/8 inch to 1-3/4 inch, so a 2 inch door is outside its range. For a keyed knob on a 2 inch door, the Corbin Russwin CK4851 entrance/office cylindrical lock takes 1-3/8 inch to 2 inch doors, and the Deltana 3381 Egg Knob entry and Deltana 6171 Round Knob entry both cover 1-3/8 inch to 2 inch as well. The Falcon X101 goes further at 1-3/8 inch to 2-1/4 inch, but it is a passage function knobset with no key.
11) Which knobs look like the Callan Edgewood entrance knobset but will not lock with a key?
Several Grade 2 knobs share the same cylindrical body and prep but are non-keyed. The Dexter C2000 passage ball knob and the Corbin Russwin CK4410 Global knob are both Grade 2 passage/closet functions with no cylinder, and both fit 1-3/8 inch to 1-3/4 inch doors like the Callan Edgewood. The Arrow MK01 and Arrow RK01 are Grade 2 passage knob locks over the same door range, also non-keyed. The Bravura Albany and Bravura Lynchburg round trim knobsets are Grade 2 passage as well. If the door needs a key from the outside, none of those substitute for the Edgewood, which is an entrance function with a 5 pin KW1 cylinder.
12) The tenant should not be able to leave the door unlocked - is the Callan Edgewood the right lock for a storage or utility room?
No. The Callan Edgewood is an entrance function, so the inside turn button can leave the outside knob unlocked. For a room that must stay locked, use a storeroom function: the Sargent 6G04 is a Grade 2 storeroom/closet knob lock with a single cylinder at standard duty, and the Sargent 8XG04 is a Grade 1 heavy duty storeroom/closet single cylinder knob lock with a 2-3/4 inch backset. On a storeroom function the outside knob stays locked at all times and is retracted only by the key.
13) I want a Schlage keyway instead of Kwikset on my entry knobs - what are my options next to the Callan Edgewood?
The Callan Edgewood is ordered with either a KW1 5-pin standard or an SC1 5-pin keyway, so it can be keyed into a Schlage SC1 building system directly. Among the keyed knob comparables, the Cal-Royal BER00 entrance/office Grade 3 knob lock is built with a Kwikset keyway, so it will not key into an SC1 system. If you are standardizing an entire building on one keyway, the Edgewood keying options let you specify keyed alike or keyed different at the same time.
14) What do I have to specify when ordering the Callan Edgewood knobset?
Three things. Finish, either US15 Satin Nickel or US10BE Edged Bronze. Keyway, KW1 5-pin standard or SC1 5-pin. And keying, keyed different or keyed alike. Miss the keyway and you can end up with cylinders that will not accept the key system already in the building.
15) How does a keyed entry knob differ from a privacy or passage knob, and which do I need?
Keyed entry is the function for a door you lock from outside. The Edgewood locks with a key on the exterior and with a turn button on the interior side, which is what an exterior entry door or a unit front door needs. For a bedroom or bathroom you want privacy, push button inside and emergency release outside, like the Dexter C2000 privacy knob. For a hall or closet door that never locks, use a passage knob such as the Dexter C2000 passage or the Corbin Russwin CK4410. A dummy knob, like the BEST 6K single dummy, has no latch at all and is pull only.
16) Can I use the Callan Edgewood knobset on a fire rated door?
Nothing in the Edgewood record supports a fire door application; it is a residential Grade 2 keyed entry knob. Where the opening carries a fire label, use a lock listed for it, such as the Falcon W101 Grade 2 cylindrical knob or the Falcon X101 Grade 1, both of which carry a fire rating in our records. Note both Falcon knobs are passage function, so a keyed opening needs the keyed equivalent in those series.
17) I need a keyed knob for an apartment entry door but the opening does not need Grade 2 - what is a lighter option?
The Cal-Royal BER00 is a Grade 3 entrance/office knob lock with a Kwikset keyway, sized for doors 1-3/8 inch to 1-3/4 inch. The Pamex FTF Baron is another Grade 3 entrance/office knob lockset over the same 1-3/8 inch to 1-3/4 inch range. Both give the same key-outside entrance function as the Callan Edgewood, which is built to Grade 2, and the BER00's Kwikset keyway lines up with the Edgewood's 5 pin KW1 cylinder if you are keying a building to KW1.
18) I ordered a Callan Edgewood for a bedroom door by mistake - what is the right knob for a bed or bath opening?
A bedroom or bathroom door wants a privacy function, which locks from inside with a thumbturn and has no key outside. The Dexter C2000 privacy ball knob is Grade 2 and fits 1-3/8 inch to 1-3/4 inch doors, the same range as the Callan Edgewood. The Cal-Royal BER20 privacy knob lock and the Pamex FTF Baron privacy knob lockset are Grade 3 options over the same door range. The Callan Edgewood is an entrance function keyed from the outside, which is the wrong function for an interior bed or bath door.
19) I need a keyed knob on a labeled fire door - does the Callan Edgewood fit that, and what carries a fire rating?
Of the comparable knob locks, the Falcon W101 Grade 2 cylindrical knob lock with a 2-3/4 inch backset carries a fire rating, as does the Falcon X101 Grade 1 heavy duty knobset with interchangeable core covering 1-3/8 inch to 2-1/4 inch doors. Both of those Falcon units are passage/closet latch functions rather than keyed entrance, so for a labeled opening that also needs a key you should confirm the function against the door schedule before ordering.
20) Can I use a dummy knob to match the Callan Edgewood on a closet or inactive door?
A dummy knob is a surface-mounted trim with no latch, so it does not bore or latch like the Callan Edgewood, which uses a 2-1/8 inch cross bore, a 1 inch edge bore and an adjustable 2-3/8 inch or 2-3/4 inch backset latch. If you need a dummy on the inactive leaf, the Schlage A170 single dummy trim is Grade 2 heavy duty for doors 1-3/8 inch to 1-7/8 inch, the BEST 6K single dummy trim is Grade 2 medium duty, and the Bravura Biloxi round trim dummy knobset is Grade 2. None of them latch or key - they are pull trim only.
21) How does the Callan Edgewood compare to a Kwikset Polo entry knob for a rental unit front door?
The Kwikset 400P-CP Polo keyed entry knob is Grade 3, fits doors 1-3/8 inch to 1-3/4 inch, and ships with a round corner adjustable latch and round corner strike. The Callan Edgewood is Grade 2, covers the same 1-3/8 inch to 1-3/4 inch door thickness, comes standard with a round corner latch faceplate and 1/2 inch throw, and has an adjustable 2-3/8 inch or 2-3/4 inch backset. Both are keyed entrance knobs with a reversible handing approach to left and right hand doors, and both drop into the same round corner strike prep.
22) What is the difference between the Callan Edgewood and the Delaney entrance knobsets?
The Delaney Belton, Delaney Galway and Delaney Olivia are all Grade 3 entrance knobsets, each a distinct knob series. The Callan Edgewood is an entrance knobset built to Grade 2, made of zinc, with an adjustable 2-3/8 inch or 2-3/4 inch backset, a 5 pin KW1 cylinder and fully reversible handing. All four are keyed entrance function, so the choice comes down to grade and the knob styling you want to match across the doors.
23) Is there a keyless option instead of the Callan Edgewood for a door where I do not want to hand out keys?
The Lockey 3830 is a mechanical keyless combination knob lock with an auto-locking passage function, for doors 1 3/16 inch to 2 inch thick. It opens on a code rather than a key, so there is nothing to re-key or hand out when a tenant or crew changes. The Callan Edgewood is the keyed route on that same opening: an entrance function with a 5 pin KW1 cylinder, orderable keyed alike or keyed different for doors 1-3/8 inch to 1-3/4 inch.
24) Is a Sargent exit device knob trim a substitute for the Callan Edgewood entrance knobset?
No. The Sargent 28C-KNOB is exit device trim with a knob and rose for 1-3/4 inch doors, meaning it mounts to the outside of a panic device rather than working as a standalone lock in a bored door. The Sargent 78-2875 is an outside knob only with B design, again trim rather than a complete lockset. The Callan Edgewood is a complete cylindrical knobset with its own latch, a 2-1/8 inch cross bore and 1 inch edge bore prep, and an adjustable 2-3/8 inch or 2-3/4 inch backset.
25) I need a keyed entry knob and a matching deadbolt for the same door - what covers that next to the Callan Edgewood?
The Schlage Residential F500 Plymouth with Georgian knob is a combo pack with adjustable backsets and dual strikes, for doors 1-3/8 inch to 1-3/4 inch. The Callan Edgewood covers the same 1-3/8 inch to 1-3/4 inch door thickness with an adjustable 2-3/8 inch or 2-3/4 inch backset, but it is the keyed entrance knobset alone, so a deadbolt for that opening is ordered separately and keyed to match through the KW1 or SC1 keyway you select.
26) How far does the Callan Edgewood knob stick out from the door face?
Projection is 2-5/8 inches from the face of the door. That matters where a door swings back against a wall or a cabinet, or where two doors are close enough in a corner that the knobs could collide. Measure the swing clearance before committing on a tight opening.
27) Do the Callan Edgewood knob screws show on the inside of the door?
Yes, the mounting screws are exposed on the Edgewood rather than concealed. It is a visible fastener rose. If a clean screwless look on the interior side is the requirement, that is a reason to look at a different trim style.
28) What finishes does the Callan Edgewood entrance knob come in, and will they match other hardware on the door?
Two finishes: US15 Satin Nickel and US10BE Edged Bronze. US15 is the standard brushed nickel most builder hardware is matched to. US10BE is a dark bronze with lighter wear edges, which reads closer to oil rubbed bronze than to a flat brown. Both are common enough finishes that hinges and deadbolts on the same opening are easy to match.
29) Can one person install the Callan Edgewood knobset, or do I need a second set of hands?
One person. The Edgewood is built for single person installation, and the adjustable backset means you do not need to know whether the door was bored at 2-3/8 or 2-3/4 inches before you get to the job. Between that and the reversible handing, a property manager turning several units can carry one part number and one screwdriver.
How fast can I get the Callan G2KE1001 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Callan G2KE1001 come with a warranty?
Absolutely. The Callan G2KE1001 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Callan G2KE1001?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Callan G2KE1001 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.