You may also like
Callan Sawyer Keyed Entry Single Cylinder Door Knobset
Keyed Entry Function: Keyed entry knobs and levers are able to be locked from the exterior with a key, and then locked or unlocked from the inside with a turn-button.
Features:
- Meets BHMA security grade 2 requirements
- Made of durable zinc
- Fully reversible handing for left or right handed applications
- Designed for an easy one person installation
- Comes standard with a round corner latch faceplate and 1/2" throw
- Includes a limited lifetime warranty on mechanical parts and a five year warranty on finish
Specifications:
- Backset: Adjustable 2-3/8" or 2-3/4"
- Cross Bore: 2-1/8"
- Edge Bore: 1"
- Door Thickness: 1-3/8" to 1-3/4"
- Handing: Reversible Left or Right
- Projection: 2-5/8"
- Latch Faceplate: Round Corner
- Cylinder: 5 Pin KW1
- Concealed Screws: No
- Material: Zinc
Manufacturer Resources
Product Specs
- Subcategory:
- Bored Locksets
- Series:
- Sawyer
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Residential
- Lock Function:
- Entrance
- Product Type:
- Knobsets
- Grade:
- Grade 2
- Product Attribute:
- Cylindrical Locks
- Product Function:
- Entrance
- Product Category:
- Mechanical Locks
- Department:
- Door Hardware
Callan G2KS1001 – Frequently Asked Questions
1) Will the Callan Sawyer entry knob fit a 1-3/8 inch interior door as well as a standard 1-3/4 inch exterior door?
Both. The Sawyer keyed entry knobset covers a door thickness range of 1-3/8 inches to 1-3/4 inches, so it works on an older 1-3/8 inch interior slab and on the standard 1-3/4 inch exterior door without any extra parts. Anything thicker than 1-3/4 inches is outside its range.
2) Does the Callan Sawyer knobset drop into an existing 2-1/8 inch bore, and does it handle a 2-3/8 or 2-3/4 inch backset?
It drops straight into the standard prep: 2-1/8 inch cross bore, 1 inch edge bore, with an adjustable latch that sets to either a 2-3/8 inch or a 2-3/4 inch backset. So if you are pulling an old knob off a door that was already bored, the Sawyer goes back in the same holes with no new drilling, and you do not have to know the backset before you order.
3) Do I need to order a left hand or right hand version of the Callan Sawyer knob?
No handing to specify. The Sawyer entrance knobset is fully reversible, so the same box works on a left hand or right hand door. Order the finish and keying and the installer sorts the swing on site.
4) What do I have to specify when ordering the Callan Sawyer entry knob, and can I get a building keyed alike?
Three choices at order. Finish: US15 Satin Nickel, US3 Bright Brass, US19 Black, US5 Antique Brass, or US10BE Edged Bronze. Keyway: KW1 5-pin or SC1 5-pin. And keying: keyed different, keyed alike, or a key charge line. Keyed alike is the one property managers want when a whole building or a unit's doors should run on one key, and picking SC1 lets you stay on a Schlage-style key if that is what the rest of the property already uses.
5) Is the Callan Sawyer knob strong enough for an apartment or commercial door, or should I step up to a Grade 1 lock?
The Sawyer meets BHMA Grade 2 and is built for residential use, in zinc. Grade 2 is fine for apartment unit doors and light multi-family traffic. For a commercial opening that takes real cycles, step up: the BEST 8K Series entrance knob lock is a Grade 1 heavy duty single cylinder, and the Sargent 8XG04 is a Grade 1 storeroom knob lock with a 2-3/4 inch backset.
6) What knob substitute works on a door thicker than 1-3/4 inch when the Callan Sawyer will not fit?
The Corbin Russwin CK4851 Grade 1 entrance/office cylindrical knob covers doors 1-3/8 inch to 2 inch, and the Corbin Russwin CK4310 Grade 1 passage/closet knob covers the same 1-3/8 inch to 2 inch range if no key is needed. The Falcon X101 Grade 1 passage knobset goes to 1-3/8 inch to 2-1/4 inch. Deltana entry knobs including the 6171 Round Knob and the 3381 Egg Knob also list 1-3/8 inch to 2 inch. The Callan Sawyer is built for doors 1-3/8 inch to 1-3/4 inch.
7) What keyed knob should be used instead of the Callan Sawyer on a heavy traffic commercial opening?
Step up to the BEST 8K Series entrance function single cylinder knob lock, which is a Grade 1 heavy duty knob in the entrance function. The Corbin Russwin CK4851 is another Grade 1 entrance/office cylindrical knob with a conventional cylinder, rated for doors 1-3/8 inch to 2 inch. The Callan Sawyer is a Grade 2 entrance knobset built in zinc for residential use, so on a high cycle commercial door the Grade 1 pair is the heavier specification.
8) What is the non-keyed version to order for interior doors when the Callan Sawyer entrance function is more lock than the opening needs?
For a hall or closet door that only needs a latch, the Corbin Russwin CK4410 is a Grade 2 non-keyed passage/closet cylindrical knob for doors 1-3/8 inch to 1-3/4 inch, and the Dexter C2000 passage ball knob is a Grade 2 non-keyed passage knob over the same range. For a bed or bath door, the Dexter C2000 privacy knob is the Grade 2 privacy function. The Callan Sawyer is a keyed entry function that locks from the exterior with a key and from the inside with a turn-button, which those interior doors do not require.
9) Which knobsets look like the Callan Sawyer but will not lock the door?
Dummy trim is the usual mix-up. The BEST 6K Series single dummy trim, the Schlage A170 single dummy trim and the Bravura Biloxi dummy knobset are all Grade 2 knobs with a dummy function, meaning fixed trim with no latch and no cylinder. The Emtek Arts and Crafts Hammered Egg and Emtek Georgetown crystal knobsets are also dummy pairs. The Callan Sawyer is a keyed entry function with a 5 pin KW1 cylinder and a 1/2 inch throw latch, so any of the dummy items above will mount on the door but will not secure it.
10) What keyed knob should be used instead of the Callan Sawyer when the door must stay locked at all times but always exit freely?
That is storeroom function, not entrance function. The Sargent 6G04 is a Grade 2 storeroom/closet knob lock with a single cylinder at standard duty, and the Sargent 8XG04 is the Grade 1 heavy duty storeroom/closet single cylinder version with a 2-3/4 inch backset. The Callan Sawyer is an entrance function, which unlocks from the inside with a turn-button and can be left unlocked, so a storeroom opening that must never be left free calls for one of the Sargent locks.
11) Will a 1/2 inch throw latch catch my existing strike plate?
The Sawyer ships with a 1/2 inch latch throw and a round corner faceplate. That is the normal residential bored-lock throw, so it will engage a standard strike in an existing frame. Watch the strike itself, not the throw: the faceplate is round corner, so if your door edge is mortised square corner you will need to square the mortise or file the corners.
12) Does the Callan Sawyer entry knob lock with a key from outside and a turn button inside?
That's the keyed entry function: locked or unlocked from outside with the key, and locked or unlocked from the inside by the turn button on the knob. It is the right function for a front door, a back door, or an apartment entry. If you only want the door to latch with no locking at all, that's a passage set instead, like the Dexter C2000 Series passage ball knob; for a bath or bedroom with a push-button and emergency release, use a privacy set such as the Dexter C2000 privacy knob.
13) I need matching passage and privacy knobs to go with a keyed entry set on the same job. What pairs with the Callan Sawyer?
The Sawyer is sold in the entrance function only, so a matching interior set has to come from a family that offers the full run. The Dexter C2000 Series covers entry/office, passage, privacy, and classroom knobs all at Grade 2 and all across 1-3/8 to 1-3/4 inch doors, which lets you run one look through a unit. The Pamex FTF Baron family does the same at Grade 3 in entrance/office, privacy, and passage.
14) Is there a lighter grade keyed knob equivalent to the Callan Sawyer entrance knobset?
Yes. The Cal-Royal BER00 is a Grade 3 entrance/office knob lock with a Kwikset keyway for doors 1-3/8 inch to 1-3/4 inch, and the Pamex FTF Baron is a Grade 3 knob lockset in entrance/office function over the same door thickness range. The Kwikset 400P-CP Polo keyed entry knob is also Grade 3 in an entrance function. All three key and lock like the Callan Sawyer, which meets BHMA Grade 2 with a 5 pin KW1 cylinder; the Cal-Royal BER00 shares the Kwikset keyway family the Sawyer's KW1 cylinder uses.
15) What is the alternative to the Callan Sawyer for a classroom door that must not be locked from inside?
The Dexter C2000 Series classroom cylindrical ball knob lock is a Grade 2 keyed knob in classroom function for doors 1-3/8 inch to 1-3/4 inch, the same grade and door range family as the Callan Sawyer. Classroom function keys from the outside with no inside locking control, where the Sawyer's entrance function gives the occupant an inside turn-button.
16) Is there a fire rated knob lock to use where the Callan Sawyer entrance knobset is being considered?
The Falcon W101 is a Grade 2 medium duty cylindrical knob lock with a fire rating, in passage/closet latch function with a 2-3/4 inch backset, and the Falcon X101 is the Grade 1 heavy duty fire rated cylindrical passage knobset with an interchangeable core for doors 1-3/8 inch to 2-1/4 inch. Both are passage function rather than keyed, so on a rated opening that also needs a key, pair the rating requirement with a keyed Grade 1 knob such as the BEST 8K Series entrance lock. The Callan Sawyer is a Grade 2 residential entrance knobset in zinc.
17) What keyed entry knob has a comparable residential look to the Callan Sawyer for matching other doors in a house or unit?
The Delaney Belton, Galway and Olivia are all Grade 3 entrance knobsets, and the Delaney Brookhaven is an entry knobset in the Brookhaven Knob series. The Master Lock BC Series biscuit knob is a Grade 3 keyed entry knob, and the Kwikset 400P Polo is a keyed entry knob supplied with a 6AL latch and RCS strike. The Callan Sawyer is a Grade 2 entrance knobset offered in US15 Satin Nickel, US3 Bright Brass, US19 Black, US5 Antique Brass and US10BE Edged Bronze, so finish matching across a fleet of doors is where these sets differ most.
18) What can be used in place of the Callan Sawyer knobset when keys need to be eliminated from the opening?
The Lockey 3830 is a mechanical keyless combination knob lock with an auto-locking passage function, fitting doors 1 3/16 inch to 2 inch. It works on code entry rather than a cylinder. The Callan Sawyer uses a 5 pin KW1 cylinder with a key from the exterior, so the Lockey removes key handling entirely where the Sawyer keeps a keyed cylinder that can be keyed alike across doors.
19) How far does the Callan Sawyer knob stick out from the door face?
Projection is 2-5/8 inches. That matters where a door swings back against a wall or where a storm door, cabinet, or adjacent trim sits close to the knob, and it is the number to check before you commit on a tight opening.
20) Can one person install the Callan Sawyer knobset, and are the screws visible on the inside knob?
It is built for a one-person install and the mounting screws are exposed, not concealed. Exposed screws mean the trim comes off with a screwdriver rather than needing a spanner or a hidden detent release, which is what makes it quick for a maintenance tech re-keying or swapping a unit door. If the look of visible rose screws is a problem on a front entry, that is the trade-off.
21) What is the difference between the Callan Sawyer entrance knobset and a solid brass entry knob like the Deltana Portland?
The Deltana 6901 Portland Knob is an entry function knob for doors 1-3/8 inch to 1-3/4 inch, and the Omnia 434/PA egg-shaped knob latchset is solid brass with a 3 inch projection in passage function. The Callan Sawyer is a Grade 2 entrance knobset made of zinc with a 2-5/8 inch projection, reversible handing and an adjustable 2-3/8 inch or 2-3/4 inch backset, so the differences are material, projection and the published BHMA grade.
22) Is a combo pack a better order than the Callan Sawyer knobset when a whole door needs hardware?
The Schlage Residential F500 Plymouth with Georgian Knob is a combo pack with adjustable backsets and dual strikes for doors 1-3/8 inch to 1-3/4 inch, covering more than one function in a single order. The Callan Sawyer is a single keyed entrance knobset with an adjustable 2-3/8 inch or 2-3/4 inch backset and a round corner latch faceplate, ordered per opening with a KW1 or SC1 keyway and keyed alike or keyed different.
How fast can I get the Callan G2KS1001 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Callan G2KS1001 come with a warranty?
Absolutely. The Callan G2KS1001 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Callan G2KS1001?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Callan G2KS1001 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.