Camden SureWave CM-336 Series ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$250.00
$226.85

Camden SureWave CM-336 Series Wireless, Built-In 915MHZ/40 Hand Icon Faceplate Touchless Switch

(No reviews yet) Write a Review

Model: CM-336/40
From the CM-336 Series Collection
$250.00
$226.85
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$250.00
$226.85
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

SureWave CM-336 Series Wireless, Built-In 915MHZ/40 Hand Icon Faceplate Touchless Switch

CM-336 touchless switches offer the longest battery life, up to 100 activations day for 4 years, with an option for even longer battery life using lithium batteries. SureWave™ CM-336 wireless switches are compatible with Camden’s Lazerpoint RF™ family of 915Mhz. spread spectrum wireless products.

SPECIFICATIONS

NO. OF IR SENSORS: 1
BATTERIES: (2) ‘AA’ ALKALINE (SUPPLIED)
(2) ‘AA’ LITHIUM BATTERIES (OPTIONAL)
ESTIMATED BATTERY LIFE: 4 YEARS (BASED ON 100 OPERATIONS/DAY)
LOW BATTERY ALARM: YES
BATTERY TEST GAUGE: YES
STANDARD OPERATING RANGE: 1"- 12" (25.4MM - 304MM)
OPERATING MODE: MOMENTARY
BUILT-IN 915MHZ. SPREAD SPECTRUM WIRELESS TRANSMITTER
INPUT: REQUEST TO EXIT OR EXTERNAL (DOOR CONTACT)

Manufacturer Resources

Product Specs

Series:
CM-336
Contact Rating:
3 Amps @ 30 V
Relay Action:
Multi Function
Relay Operating Modes:
Event, Toggle
Inputs:
REX, DPS
Warranty:
3 Year Limited
Wireless Communication:
Yes
Subcategory:
Hands Free Switches
Sensor:
Active Infrared Air
Number of Relays:
1
Application:
Indoor
Commercial/Residential:
Commercial
Product Type:
Hands Free Switches
Power:
40 mA
Fail-safe / Fail-secure:
Field Selectable
Product Group:
Electronic Access Controls
Product Subgroup:
Sensors, Switches, Relays and Timers
Product Voltage:
12VAC/DC/24VDC/24VAC
Product Length:
5.25"
Product Height:
2"
Product Category:
Electronic Access Control
Product Weight:
0.4
Product Width:
5.5"
Collection:
CM-336 Series
Department:
Door Hardware

Camden Door Controls CM-336/40 – Frequently Asked Questions

1) Does the Camden SureWave CM-336 touchless switch need wiring run back to the door controller?
No wiring run is needed from the switch itself. The CM-336 has a built-in 915MHz spread spectrum wireless transmitter and runs on two AA alkaline batteries that come supplied, so the faceplate mounts where you want it without pulling cable. You still need a Camden Lazerpoint RF 915MHz receiver on the door side, since that is the family the switch transmits to. That makes it a common pick for retrofit openings in existing walls where fishing wire is the expensive part of the job.
2) How far away does your hand have to be for a CM-336 touchless switch to trigger?
Activation range is 1 inch to 12 inches (25.4mm to 304mm) from the single active infrared sensor. That is a deliberate short range so people walking past in a corridor don't set the door off, but it's far enough that a user never contacts the plate. Operating mode is momentary, so it sends one activation per wave rather than latching.
3) Which faceplate size of the Camden CM-336 wireless switch should I order for my wall?
Four plate formats are offered: single gang, double gang, narrow, and 6 inch round. Single gang drops into a standard switch box, narrow is the one for mullions and door frames where there isn't room for a full gang plate, and the 6 inch round is the high-visibility option usually used at barrier-free restroom and entrance approaches. Each comes in black or stainless steel.
4) How long do the batteries last in a Camden CM-336 touchless switch, and how do I know when to change them?
Roughly 4 years at 100 activations per day on the supplied AA alkalines. If the opening sees heavier traffic, order the lithium battery option, which is a selectable choice on every faceplate size and finish and extends that further. For maintenance staff, the switch has a low battery alarm and an on-board battery test gauge, so you aren't guessing during rounds or waiting for a dead door.
5) Can the Camden CM-336 switch be set up to unlock on power loss for a fire exit?
Fail-safe versus fail-secure is field selectable on the CM-336, so the installer sets the behaviour at commissioning rather than ordering a different part number. It carries one relay with multi-function action and two relay operating modes, event and toggle, letting you run it as a momentary release or as a latching hold-open.
6) Will the CM-336 relay handle switching my maglock or strike directly?
The relay is rated 3 amps at 30 V, and the unit operates on 12VAC/DC, 24VDC or 24VAC drawing 40 mA. That covers typical 12V and 24V electric strikes and magnetic locks, but check the inrush and holding current of your specific lock against the 3 amp contact rating before wiring it straight through. Anything above that needs an interposing relay or a dedicated power supply relay board.
7) Can I wire a door position switch or request-to-exit signal into the Camden CM-336?
Yes. The CM-336 accepts two inputs, REX (request to exit) and DPS (door contact). Tying in the door position switch lets the switch respond to actual door state rather than firing blind, which is how integrators keep an automatic operator from re-triggering on a door that's already open.
8) Is the Camden SureWave CM-336 touchless switch rated for outdoor use?
Indoor only. The CM-336 is specified for indoor commercial applications, so exterior entrances, loading docks, and unconditioned vestibules need a switch rated for those conditions instead. Inside, it's a standard fit for healthcare corridors, restrooms, clean areas, and multi-family common doors.
9) What size opening do I need to cut for a Camden CM-336 faceplate?
Published overall dimensions are 5.5 inches wide by 5.25 inches long by 2 inches high, at 0.4 lbs. Note that the 2 inch figure includes the battery compartment depth behind the plate, so allow clearance in the box or mullion cavity, not just the plate footprint on the wall.
10) Wireless touchless switch or hardwired one, which makes more sense for an existing building?
The deciding factor is usually the wall, not the switch. A hardwired touchless switch needs conduit or cable back to the controller, which on a finished masonry or tile wall is the bulk of the labour. The wireless CM-336 removes that run entirely by transmitting on 915MHz spread spectrum to a Lazerpoint RF receiver, and it is battery powered at around 4 years of life. The trade is battery maintenance and the need for a compatible receiver at the door. New construction with the walls open often goes hardwired; retrofits and restroom remodels go wireless.
How fast can I get the Camden Door Controls CM-336/40 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Camden Door Controls CM-336/40 come with a warranty?
Absolutely. The Camden Door Controls CM-336/40 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Camden Door Controls CM-336/40?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Camden Door Controls CM-336/40 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.