You may also like
Cantex EZXKL PVC 4-Square 2-Gang Blank Cover
The Cantex EZXKL PVC 4-Square 2-Gang Blank Cover is a durable, non-metallic closure plate engineered to seal an unused 4-square electrical box opening while maintaining a clean, finished appearance on the wall or ceiling surface. Molded from rugged PVC, this blank cover is built for electricians and contractors who need a reliable, corrosion-resistant solution for capping boxes that are not yet fitted with a device, or for permanently closing off a knockout location that will not be used. The 2-gang configuration matches standard 4-square box openings, making it a straightforward, drop-in solution for residential, commercial, and light industrial wiring projects where a device is not required at a given location.
Key Features
- Configuration: Designed to fit a 4-square, 2-gang box opening, providing a precise, secure fit over the box for a clean, professional finish.
- Durable Construction: Molded from PVC for corrosion resistance and long-term durability, making it well suited to a wide range of installation environments where metal covers may be prone to rust or degradation.
- Blank Cover Design: A solid, device-free plate that closes off an unused box opening, protecting the wiring cavity from dust, debris, and accidental contact until a device is installed or the location is permanently capped.
- Lightweight, Non-Metallic Material: PVC construction is easy to handle and install, and will not conduct electricity, adding a layer of safety when working around energized boxes.
- Standard Fit: Sized to match common 4-square 2-gang box footprints used throughout residential and commercial electrical rough-in and finish work, simplifying inventory and stocking for electrical contractors.
Technical Specifications
- Product Type: Blank Cover
- Material: PVC
- Configuration: 4-Square, 2-Gang
Typical Applications
- Capping Unused 4-Square Electrical Box Openings
- Residential and Commercial Rough-In Wiring
- Temporary or Permanent Box Closures
- Renovation and New Construction Projects
- PVC Conduit and Box Wiring Systems
Why Cantex?
Cantex is a trusted name in PVC electrical products, and the EZXKL blank cover reflects that reputation with solid PVC construction designed to hold up in the field. Electrical professionals rely on Cantex components like this 4-square 2-gang blank cover to complete their box installations with a durable, code-appropriate, non-metallic closure that keeps unused openings protected and finished-looking, whether the job is a new build or a maintenance retrofit.
Manufacturer Resources
Product Specs
- list_batch:
- CAN-20260924
- Product Type:
- Blank Cover
- Configuration:
- 4-Square, 2-Gang
- Department:
- Electrical
- Product Subgroup:
- Box Covers
- Product Material:
- PVC
- Product Group:
- Boxes & Enclosures
Cantex EZXKL – Frequently Asked Questions
1) Will the Cantex EZXKL blank cover fit a standard 4-square electrical box?
Yes. The EZXKL is molded for a 4-square, 2-gang box opening, so it drops onto the common 4-square box footprint used in residential and commercial rough-in. It is a solid plate with no device openings, so it closes the box rather than mounting a receptacle or switch.
2) What is the difference between the Cantex EZXKL blank cover and the Red Dot 2CCB blank device cover?
Both close off a 2-gang opening with a solid, device-free plate. The Cantex EZXKL is molded from PVC and is sized to a 4-square, 2-gang box footprint, so it is non-conductive and corrosion resistant for damp or chemically aggressive locations. The Thomas & Betts Red Dot 2CCB is a 2-gang blank device cover from the Red Dot series. Choose the EZXKL when the system is PVC conduit and boxes and you want the closure to match the non-metallic run; choose the 2CCB when you are working in the Red Dot line.
3) Can a Wiremold V5736 blank cover be used in place of a Cantex EZXKL on a 4-square box?
No. The Wiremold V5736 is a blank cover for the 500/700 Series surface raceway, so it closes a raceway run rather than a box opening. The Cantex EZXKL is a 4-square, 2-gang blank cover that seats over a standard 4-square box. For a 4-square box opening, use the EZXKL or another 2-gang box blank; reserve the V5736 for 500 or 700 Series raceway.
4) Is the Cantex EZXKL cover metal or plastic?
PVC, not metal. That makes it non-conductive and corrosion resistant, which is why electricians reach for it on damp, washdown, or coastal work where a steel cover would rust. If your box and conduit system is already PVC, the EZXKL keeps the whole assembly non-metallic.
5) Can I use a blank cover to permanently close an unused box, or is it only temporary?
Either. A blank cover like the EZXKL is used both ways: capping a box during rough-in before the device goes in, and permanently closing a 4-square opening that will never carry a device. It keeps dust and debris out of the wiring cavity and prevents accidental contact with conductors inside.
6) Will a 2-gang blank cover work on a 4-square box that currently has a single-device ring on it?
The EZXKL seats on the 4-square box opening itself, not over a plaster ring. Pull the ring and the cover lands flat on the box face. If you need to leave a raised ring in place, you need a cover sized to that ring instead, not a flat 4-square blank.
7) Which 2-gang blank cover should I use in a corrosive or wet-area install instead of a steel one?
The Cantex EZXKL is the non-metallic option: it is molded PVC, which will not rust and does not conduct, making it suited to locations where metal covers degrade. The Wiremold V5736 blank cover is steel in an ivory finish, so it is the metallic alternative and belongs on 500/700 Series raceway rather than a box.
8) What is the part number to order for the Cantex PVC 4-square 2-gang blank cover?
Order Cantex EZXKL. It is a single model, so there are no finish or size options to specify, just the one PVC 4-square 2-gang blank plate.
How fast can I get the Cantex EZXKL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Cantex EZXKL come with a warranty?
Absolutely. The Cantex EZXKL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Cantex EZXKL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Cantex EZXKL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.