OATEY 270776 Cherne® 5" Test-K...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$85.71
$35.71

OATEY 270776 Cherne® 5" Test-Kap® Plug

(No reviews yet) Write a Review

Model: 270776
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$85.71
$35.71
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Cherne® 5" Test-Kap® Plug

270776 - spec sheet

Manufacturer Resources

Product Specs

Maximum Back Pressure:
13 psi (0,9 bar)/30 ft. (9 M)
Volume:
0.043
Department:
Plumbing
Product Group:
Plumbing Testing
Product Subgroup:
Testing Products
Product Type:
Test Plug
Product Material:
Plastic
Product Weight:
0.8
Product Nominal Size:
5 in. (125 mm)

OATEY 270776 – Frequently Asked Questions

1) How much head of water will the 5 inch Test-Kap hold during a DWV test?
Rated to 13 psi (0.9 bar), which Cherne states as 30 feet (9 m) of water column back pressure. That covers a two to three story stack test on a 5 inch line. If your test head exceeds 30 feet, step down the test into sections rather than pushing the plug past its rating.
2) Is the Cherne Test-Kap metal or plastic, and does that matter for DWV testing?
It is a plastic test cap, not a metal mechanical plug. That keeps it light (0.8 lb for the 5 inch) and corrosion free in wet DWV work, and it means no metal bands or nuts to rust into the hub. It is a pressure-test closure, not a permanent cap.
3) Should I use a Test-Kap or a mechanical test plug for my 5 inch waste line?
A Test-Kap goes over the pipe end as a sacrificial test closure for rough-in air or water tests, then gets cut or knocked off when you make up the final fitting. A mechanical plug with a nut and compression gasket goes inside the pipe and is meant to be set and removed repeatedly, which is what you want for cleanout testing or a plug you plan to reuse. For a one-time 5 inch rough-in test, the 270776 Test-Kap is the simpler part.
4) Can I use the 5 inch Test-Kap as a permanent cap on a stub-out?
No. It is a test plug, intended to hold a DWV test up to 13 psi and then come off. For a permanent closure, use a solvent-weld or no-hub cap rated for the system rather than a test cap.
5) What is the Oatey part number and UPC for the 5 inch Cherne Test-Kap?
Order it as Oatey 270776, the Cherne 5 inch Test-Kap. The UPC on the package is 675115270770, which is useful if your supply house stocks several Cherne test caps side by side and the sizes look alike on the shelf.
How fast can I get the OATEY 270776 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 270776 come with a warranty?
Absolutely. The OATEY 270776 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 270776?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the OATEY 270776 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.