Chicago® Grip Coated Guy Wire
16845C - spec sheet
Warnings
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
- Do not exceed rated capacity.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
Features
- Maximum Safe Load is 8000-Pound (3629 kg)
- Sawtooth Jaw Profile Resists Build-up
- Locking handle keeps jaw open while grip is placed on cable with a hot stick
- Designed for cable sizes 0.218-Inch to 0.55-Inch (5.54 mm to 13.97 mm)
- Manufactured from drop-forged, heat-treated steel for excellent durability with a spring that closes grip on cable helping to maintain initial position
- 5'' jaw length increases surface area contact with the cable, minimizing cable damage
- Aggressive sawtooth jaw profile resists build-up from galvanized coating on guy strand and EHS cables
- Made in USA
16845C - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.218" to 0.55" (5.54 to 13.97 mm)
- Cable Type:
- Aircraft, EHS, Messenger, Guy Strand
- Depth:
- 9.5000 in
- Height:
- 1.7600 in
- Hot Latch:
- No
- Jaw Length:
- 5" (12.7 cm)
- Jaw Type:
- Aggressive
- Locking Handle:
- Yes
- Material:
- Alloy Steel
- Maximum Safe Load:
- 8000 lb (3629 kg)
- Overall Height:
- 2.5" (6.4 cm)
- Overall Length:
- 13.3" (33.8 cm)
- Overall Width:
- 7.6" (19.3 cm)
- Spring:
- Yes
- Swing Latch:
- No
- Type:
- Chicago Grip
- Weight:
- 6.0000 lbs
- Width:
- 6.7500 in