You may also like
Klein Tools 1659-50 Chicago® Grip for PVC-Covered Conductors
Model: KLN-1659-50
Chicago® Grip for PVC-Covered Conductors
Features
Made in USA
Serpentine jaws are specially machined to allow insertion of insulated conductor through the jaws, which reduces danger of slippage...
Klein Tools
$1,004.20
$954.20
Klein Tools 1659-30 Chicago Grip for PVC-Covered Conductors 0.5-Inch
Model: KLN-1659-30
Chicago Grip for PVC-Covered Conductors 0.5-Inch
Warnings
Grips are to be used for temporary installation, not for permanent anchorage.
Before each use, clean jaw area and inspect grip for proper...
Klein Tools
$581.73
$531.73
Klein Tools 1659-40 Grip for PVC-Covered Conductors 0.79-Inch
Model: KLN-1659-40
Grip for PVC-Covered Conductors 0.79-Inch
Warnings
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
When used on/near energized lines, ground, insulate, or...
Klein Tools
$973.21
$923.21
Klein Tools 1678-20 Chicago® Grip for Aluminum Conductors
Model: KLN-1678-20
Chicago® Grip for Aluminum Conductors
Features
Round jaws shaped to provide maximum contact with circumference of cable, less likely to damage conductors.
Can be supplied with hot-line latch on...
Klein Tools
$628.86
$578.86
Klein Tools 1659-5AT Chicago® Grip Type B Strand Puller
Model: KLN-1659-5AT
Chicago® Grip Type B Strand Puller
Features
Equipped with chain, toggle, and shackle
Made in USA
Serpentine grooves grip insulation on strand, preventing slippage
0.20-Inch to 0.37-Inch (5.08 to 9...
Klein Tools
$1,093.81
$1,043.81
Chicago® Grip for PVC-Covered Conductors 0.42-Inch
1659-20 - spec sheet
Features
- Made in USA
- Manufactured from drop-forged, heat-treated steel for excellent durability
- Eliminates necessity of stripping insulation from conductor
- Round inside-jaw contour
- (NOT HDPE)
- Serpentine jaws are specially machined to allow insertion of insulated conductor through the jaws, which reduces danger of slippage which might result in insulation damage
Warnings
- Do not exceed rated capacity.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Grips are to be used for temporary installation, not for permanent anchorage.
- Always match proper size and type of grip to application.
1659-20 - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.2" to 0.42" (5.08 to 10.67 mm)
- Cable Type:
- PVC-Coated
- Depth:
- 7.2000 in
- Height:
- 1.5750 in
- Hot Latch:
- No
- Jaw Length:
- 4.188" (10.6 cm)
- Jaw Type:
- Round - Serpentine
- Locking Handle:
- Yes
- Maximum Safe Load:
- 4500 lb (2041 kg)
- Spring:
- Yes
- Swing Latch:
- No
- Type:
- Chicago Grip
- Weight:
- 2.6100 lbs
- Width:
- 3.6000 in