You may also like
Klein Tools 1659-30 Chicago Grip for PVC-Covered Conductors 0.5-Inch
Model: KLN-1659-30
Chicago Grip for PVC-Covered Conductors 0.5-Inch
Warnings
Grips are to be used for temporary installation, not for permanent anchorage.
Before each use, clean jaw area and inspect grip for proper...
Klein Tools
$581.73
$531.73
Klein Tools 1659-50 Chicago® Grip for PVC-Covered Conductors
Model: KLN-1659-50
Chicago® Grip for PVC-Covered Conductors
Features
Made in USA
Serpentine jaws are specially machined to allow insertion of insulated conductor through the jaws, which reduces danger of slippage...
Klein Tools
$1,004.20
$954.20
Klein Tools 1659-20 Chicago® Grip for PVC-Covered Conductors 0.42-Inch
Model: KLN-1659-20
Chicago® Grip for PVC-Covered Conductors 0.42-Inch
Features
Made in USA
Manufactured from drop-forged, heat-treated steel for excellent durability
Eliminates necessity of stripping insulation from...
Klein Tools
$609.36
$559.36
Klein Tools 1678-40 Chicago® Grip - for Aluminum Conductors
Model: KLN-1678-40
Chicago® Grip - for Aluminum Conductors
Features
Can be supplied with hot-line latch on special order.
Round jaws shaped to provide maximum contact with circumference of cable, less likely to damage...
Klein Tools
$665.67
$615.67
Klein Tools 1628-40 Chicago® Grip for Conductors 25K-Pound Load
Model: KLN-1628-40
Chicago® Grip for Conductors 25K-Pound Load
Features
Manufactured from drop-forged, heat-treated steel for excellent durability
Made in USA
These grips are special order only, please allow 30 days...
Klein Tools
$2,708.51
$2,658.51
Grip for PVC-Covered Conductors 0.79-Inch
1659-40 - spec sheet
Warnings
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
Features
- Made in USA
- Manufactured from drop-forged, heat-treated steel for excellent durability
- Serpentine jaws are specially machined to allow insertion of insulated conductor through the jaws, which reduces danger of slippage which might result in insulation damage
- Eliminates necessity of stripping insulation from conductor
- Round inside-jaw contour
- (NOT HDPE)
1659-40 - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.49" to 0.79" (12.45 to 20.07 mm)
- Cable Type:
- PVC-Coated
- Depth:
- 10.9170 in
- Height:
- 2.2500 in
- Hot Latch:
- No
- Jaw Length:
- 5.688" (14.5 cm)
- Jaw Type:
- Round - Serpentine
- Locking Handle:
- Yes
- Maximum Safe Load:
- 8000 lb (3629 kg)
- Spring:
- Yes
- Swing Latch:
- No
- Type:
- Chicago Grip
- Weight:
- 7.7220 lbs
- Width:
- 5.8500 in