You may also like
Klein Tools 1692-5AT Chicago® Grip Bell-System Type Grip
Model: KLN-1692-5AT
Chicago® Grip Bell-System Type Grip
Warnings
Grips are to be used for temporary installation, not for permanent anchorage.
When used on/near energized lines, ground, insulate, or isolate grip before...
Klein Tools
$1,186.23
$1,136.23
Klein Tools 1684-5AT Chicago® Grip - Bell-System Type L Grip
Model: KLN-1684-5AT
Chicago® Grip - Bell-System Type L Grip
Warnings
When used on/near energized lines, ground, insulate, or isolate grip before pulling.
Do not exceed rated capacity.
Before each use, clean jaw area...
Klein Tools
$840.97
$790.97
Klein Tools 1659-50 Chicago® Grip for PVC-Covered Conductors
Model: KLN-1659-50
Chicago® Grip for PVC-Covered Conductors
Features
Made in USA
Serpentine jaws are specially machined to allow insertion of insulated conductor through the jaws, which reduces danger of slippage...
Klein Tools
$1,004.20
$954.20
Klein Tools 1659-20 Chicago® Grip for PVC-Covered Conductors 0.42-Inch
Model: KLN-1659-20
Chicago® Grip for PVC-Covered Conductors 0.42-Inch
Features
Made in USA
Manufactured from drop-forged, heat-treated steel for excellent durability
Eliminates necessity of stripping insulation from...
Klein Tools
$609.36
$559.36
Klein Tools 1659-30 Chicago Grip for PVC-Covered Conductors 0.5-Inch
Model: KLN-1659-30
Chicago Grip for PVC-Covered Conductors 0.5-Inch
Warnings
Grips are to be used for temporary installation, not for permanent anchorage.
Before each use, clean jaw area and inspect grip for proper...
Klein Tools
$581.73
$531.73
Chicago® Grip Type B Strand Puller
1659-5AT - spec sheet
Features
- Equipped with chain, toggle, and shackle
- Made in USA
- Serpentine grooves grip insulation on strand, preventing slippage
- 0.20-Inch to 0.37-Inch (5.08 to 9.40 mm) cable diameter range with max safe load of 5000-Pound (2268 kg)
- B" Strand Puller -- Equipped With a Chain, Toggle and Shackle
- Similar to Bell-System type ''B'' strand puller
- Designed to pull 1/4-Inch (6.35 mm) figure-8 telephone cable
Warnings
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
1659-5AT - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.2" to 0.37" (5.08 to 9.4 mm)
- Cable Type:
- Steel Strand
- Depth:
- 10.0000 in
- Height:
- 1.7600 in
- Hot Latch:
- No
- Jaw Length:
- 5" (12.7 cm)
- Jaw Type:
- Round - Serpentine
- Locking Handle:
- Yes
- Maximum Safe Load:
- 5000 lb (2268 kg)
- Spring:
- Yes
- Swing Latch:
- No
- Type:
- Chicago Grip
- Weight:
- 0.1000 lbs
- Width:
- 7.0000 in