You may also like
Klein Tools 1692-5AT Chicago® Grip Bell-System Type Grip
Model: KLN-1692-5AT
Chicago® Grip Bell-System Type Grip
Warnings
Grips are to be used for temporary installation, not for permanent anchorage.
When used on/near energized lines, ground, insulate, or isolate grip before...
Klein Tools
$1,186.23
$1,136.23
Klein Tools 1628-16AT Chicago® Grip Bell-System Type H Grip
Model: KLN-1628-16AT
Chicago® Grip Bell-System Type H Grip
Features
Outside diameter of support wire includes thickness of polyethylene coating
H" Strand Puller -- Equipped with a Chain, Toggle and Shackle
Made in...
Klein Tools
$1,790.59
$1,740.59
Klein Tools 1659-5AT Chicago® Grip Type B Strand Puller
Model: KLN-1659-5AT
Chicago® Grip Type B Strand Puller
Features
Equipped with chain, toggle, and shackle
Made in USA
Serpentine grooves grip insulation on strand, preventing slippage
0.20-Inch to 0.37-Inch (5.08 to 9...
Klein Tools
$1,093.81
$1,043.81
Klein Tools 1684-74 Chicago® Grip for EHS Cable, Curved Jaw
Model: KLN-1684-74
Chicago® Grip for EHS Cable, Curved Jaw
Features
Made in USA
For use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand
Locking handle keeps jaw open...
Klein Tools
$745.57
$695.57
Klein Tools 1684-5H Chicago® Grip with Latch 0.37-Inch Cable
Model: KLN-1684-5H
Chicago® Grip with Latch 0.37-Inch Cable
Warnings
Grips are to be used for temporary installation, not for permanent anchorage.
Before each use, clean jaw area and inspect grip for proper operation...
Klein Tools
$846.96
$796.96
Chicago® Grip - Bell-System Type L Grip
1684-5AT - spec sheet
Warnings
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
Features
- Equipped with chain, toggle and shackle to keep grip from falling off the cable
- Made in USA
- For cable diameter range of 0.218 to 0.550-Inch (5.54 to 13.97 mm); Max Safe Load of 8000-Pound (3629 kg)
- For support wire 0.134 and larger, refer to 1659 series
- Identical to Bell-System type ''L'' strand puller
- Outside diameter of support wire includes thickness of polyethylene coating
1684-5AT - spec sheet
Manufacturer Resources
Product Specs
- Accessories:
- 25450
- Cable Diameter:
- 0.218" to 0.55" (5.54 to 13.97 mm)
- Cable Type:
- Aircraft, EHS, Messenger, Guy Strand
- Hot Latch:
- No
- Item Depth:
- 10.0000 in
- Item Height:
- 1.7600 in
- Item Weight:
- 0.1000 lbs
- Item Width:
- 7.0000 in
- Jaw Length:
- 5" (12.7 cm)
- Jaw Type:
- Double V
- Locking Handle:
- Yes
- Maximum Safe Load:
- 8000 lb (3629 kg)
- Spring:
- Yes
- Style Name:
- Double V Jaw / Toggle Chain
- Sub Brand:
- Chicago Grip
- Swing Latch:
- No
- Type:
- Chicago Grip
- Weight:
- 6.9 lb (3.12 kg)