Chicago® Grip Bell-System Type H Grip
1628-16AT - spec sheet
Features
- Outside diameter of support wire includes thickness of polyethylene coating
- H" Strand Puller -- Equipped with a Chain, Toggle and Shackle
- Made in USA
- Equipped with chain, toggle and shackle
- For support wire 0.134 and larger, refer to 1659 series
- Identical to Bell-System type ''H'' strand puller, with max safe load of 15,000-Pound (6803 kg)
Warnings
- Grips are to be used for temporary installation, not for permanent anchorage.
- Always match proper size and type of grip to application.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- Do not exceed rated capacity.
1628-16AT - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.31" to 0.62" (7.87 to 15.75 mm)
- Cable Type:
- Aircraft, EHS, Messenger, Guy Strand
- Depth:
- 13.7500 in
- Height:
- 2.5000 in
- Hot Latch:
- No
- Jaw Length:
- 7.25" (18.4 cm)
- Jaw Type:
- Double V
- Locking Handle:
- Yes
- Maximum Safe Load:
- 15,000 lb (6803 kg)
- Spring:
- Yes
- Swing Latch:
- No
- Type:
- Chicago Grip
- Weight:
- 0.1000 lbs
- Width:
- 7.0000 in
- Department:
- Electrical
- Product Group:
- Tool Sets
- Product Subgroup:
- Tool Kits
- Product Type:
- Chicago Grip