You may also like
Klein Tools 1684-5AT Chicago® Grip - Bell-System Type L Grip
Model: KLN-1684-5AT
Chicago® Grip - Bell-System Type L Grip
Warnings
When used on/near energized lines, ground, insulate, or isolate grip before pulling.
Do not exceed rated capacity.
Before each use, clean jaw area...
Klein Tools
$840.97
$790.97
Klein Tools 1628-16AT Chicago® Grip Bell-System Type H Grip
Model: KLN-1628-16AT
Chicago® Grip Bell-System Type H Grip
Features
Outside diameter of support wire includes thickness of polyethylene coating
H" Strand Puller -- Equipped with a Chain, Toggle and Shackle
Made in...
Klein Tools
$1,790.59
$1,740.59
Klein Tools 1659-5AT Chicago® Grip Type B Strand Puller
Model: KLN-1659-5AT
Chicago® Grip Type B Strand Puller
Features
Equipped with chain, toggle, and shackle
Made in USA
Serpentine grooves grip insulation on strand, preventing slippage
0.20-Inch to 0.37-Inch (5.08 to 9...
Klein Tools
$1,093.81
$1,043.81
Klein Tools 1678-50 Chicago® Grip for Aluminum Conductors
Model: KLN-1678-50
Chicago® Grip for Aluminum Conductors
Features
Lightweight grips designed for use on aluminum conductors in distribution work.
Round jaws shaped to provide maximum contact with circumference of...
Klein Tools
$680.86
$630.86
Klein Tools 1678-30 Chicago® Grip - for Aluminum Conductors
Model: KLN-1678-30
Chicago® Grip - for Aluminum Conductors
Features
Lightweight grips designed for use on aluminum conductors in distribution work.
Supplied with spring and locking loop handles, allowing jaws to be...
Klein Tools
$612.07
$562.07
Chicago® Grip Bell-System Type Grip
1692-5AT - spec sheet
Warnings
- Grips are to be used for temporary installation, not for permanent anchorage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
Features
- Made in USA
- Outside diameter of support wire includes thickness of polyethylene coating
- For support wire 0.134 and larger, refer to 1659 series
- For 0.218 to 0.550-Inch (5.54 to 13.97 mm) diameter cable range with Max Safe Load of 8000-Pound (3629 kg)
- Equipped with chain, toggle and shackle to keep grip from falling off the cable
1692-5AT - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.218" to 0.55" (5.54 to 13.97 mm)
- Cable Type:
- Steel Strand
- Depth:
- 10.0000 in
- Height:
- 2.0000 in
- Hot Latch:
- No
- Jaw Length:
- 5" (12.7 cm)
- Jaw Type:
- Double V
- Locking Handle:
- Yes
- Maximum Safe Load:
- 8000 lb (3629 kg)
- Spring:
- Yes
- Swing Latch:
- No
- Type:
- Chicago Grip
- Weight:
- 0.1000 lbs
- Width:
- 5.0000 in