Command Access LPM190-M-EU-CH ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$737.96
$436.78
Command Access LPM190-M-EU-CH 24V Motorized Latch Retraction Mortise Lock with Electric Unlock - front view showing latch bolts, wiring leads, and Command Access label

Command Access LPM190-M-EU-CH 24V Motorized Latch Retraction Mortise Lock with Electric Unlock

(No reviews yet) Write a Review

Model: LPM190-M-EU-CH-24V

In Stock (leaves warehouse same day if ordered before 3pm ET)

$737.96
$436.78
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Command Access LPM190-M-EU-CH 24V Motorized Latch Retraction Mortise Lock with Electric Unlock

The Command Access LPM190-M-EU-CH is a 24V motorized latch retraction mortise lock engineered as a direct, field-handable retrofit for Schlage L9000 series trim - no door prep changes required. Built on a Grade 1 chassis rated for continuous duty, it delivers reliable electric unlock (EU/fail-secure) for storeroom and controlled-access applications in commercial buildings, healthcare facilities, educational campuses, and anywhere an automatic door operator or access control system needs a dependable electrified mortise body.

Key Features & Benefits

  • Direct Schlage L9000 Retrofit: Field-handable design fits standard Type 86 door preparation - drop-in replacement with no additional machining.
  • 24VDC Operation: Operates at 24 VDC (±10%); built-in overvoltage protection shuts down above 28VDC to protect the motor and access control system.
  • 300-Foot Wire Runs: Custom motor assembly minimizes current surge, supporting wire runs up to 300 ft with 18 AWG wire and multiple locks on a single power supply.
  • Fail-Secure (EU) Function: Latch remains locked on power loss - correct for storeroom and security-critical openings.
  • Built-In Smart Module: Reduces current draw and provides latch-sensing status feedback to the access control panel without additional hardware.
  • Continuous Duty Rated: Auto re-engages if latch is pulled from the held-back position; designed for high-cycle commercial environments.
  • Quick-Connect Wiring: 8-foot cable with quick-connect plug simplifies connection to the power supply lead.
  • Optional Request-to-Exit (REX): Available with integrated REX - select the REX variant when ordering for automatic door operator or egress applications.
  • 3-Year No-Hassle Warranty: Backed by Command Access's commercial warranty for added confidence on specified projects.

Technical Specifications

  • Voltage: 24 VDC (±10%), overvoltage shutoff at 28VDC
  • Function: Electric Unlock (EU) - Fail-Secure
  • Lock Type: Mortise, Storeroom
  • Duty Level: Heavy-Duty, Continuous Duty
  • Door Prep: Standard Type 86
  • Retrofit Compatibility: Schlage L9000 Series (direct, field-handable)
  • Wire Run: Up to 300 ft with 18 AWG
  • Cable: 8 ft with quick-connect
  • Grade: ANSI/BHMA Grade 1
  • Warranty: 3 Years
  • Series: LPM19X

Typical Applications

  • Storeroom and controlled-access openings on access control systems
  • Automatic door operator (ADO) integration
  • ADA-compliant push/pull door applications
  • Single-occupancy restrooms and secure vestibules
  • Commercial office, healthcare, and educational facilities
  • Multi-family and hospitality properties requiring electrified mortise hardware

Manufacturer Resources

Command Access Catalog

Product Specs

Product Group:
Mechanical Locks
Series:
LPM19X Series
Product Subgroup:
Mortise Locks and Trim
Product Type:
Electrified Mortise Locks
Subcategory:
Mortise
Commercial/Residential:
Commercial
Electronic:
Yes
Lock Type:
Mortise
Warranty:
3 Year Warranty
Duty Level:
Heavy-Duty
Product Attribute:
Mortise Locks
Fail-safe / Fail-secure:
Fail-Secure
Product Voltage:
24V
Product Function:
Storeroom
Product Category:
Mechanical Locks
Department:
Door Hardware

Command Access LPM190-M-EU-CH-24V – Frequently Asked Questions

1) Can I swap a Schlage L9000 mortise lock for the Command Access LPM190 without redoing the door prep?
Yes. The LPM190-M-EU-CH drops into a standard Type 86 mortise prep and is built as a direct retrofit for Schlage L9000 series trim, so the existing trim stays and no additional machining is needed. It is field-handable too, so you are not ordering handed and you can flip it on site if the opening turns out opposite of what the work order said.
2) Does this electrified mortise lock stay locked if the building loses power?
It stays locked. The EU function is fail-secure, so on power loss the latch remains projected and the opening is still secure from the outside, with the inside lever always free for egress as a storeroom function. That is the correct choice for storerooms, IT closets, and secure vestibules. If your life-safety drawing calls for the door to unlock on power failure, this is the wrong device and you want a fail-safe body instead.
3) Do I need the REX version of the LPM190, or the plain one?
Two versions are sold, one with request-to-exit and one without, and it is chosen at order time, not added later. Take the REX version when the inside lever needs to tell the access control panel or an automatic door operator that someone is leaving, so the operator swings the door and the panel does not log a forced-door alarm. If the opening is a plain storeroom door where egress just means turning the lever and walking out, the non-REX version is all you need.
4) I have a Schlage L9050 mortise lock on the door now. Can I electrify that opening with the LPM190?
That is exactly the swap it is built for. The Schlage L9050BDC is a mechanical L Series mortise entrance/office lock, no electrification, and the LPM190-M-EU-CH is a direct retrofit for Schlage L9000 series trim in a standard Type 86 prep. You get an electrified storeroom body in the same pocket. Note the function change: entrance/office is not storeroom, so the outside lever will now be locked at all times and released only by the credential or the access control system.
5) What is the closest equivalent to the Command Access LPM190-M-EU-CH motorized mortise lock from another manufacturer?
The SDC 7600 Series Grade 1 Motorized Latch Retraction Mortise Lockset with 24VDC Control is the nearest match on the core specification. Both are Grade 1 motorized latch retraction mortise bodies running on 24VDC. The LPM190-M-EU-CH is a fail-secure electric unlock body in storeroom function built for standard Type 86 door prep and direct Schlage L9000 retrofit; the SDC 7600 is listed for 1-3/4 inch doors. If the spec calls for motorized latch retraction at 24V in a mortise pocket, these two are the pair to compare.
6) If the opening only needs a keyed storeroom mortise lock with no access control, what should be used instead of the Command Access LPM190?
Use a mechanical mortise lock. The Schlage L9050BDC Mortise Entrance/Office Lock is a Grade 1, heavy duty L Series body for 1-3/4 inch doors in a single cylinder non-deadbolt entrance/office function with a disposable SFIC core. It takes no power, no wire, and no panel. The Command Access LPM190-M-EU-CH is an electrified body: it is fail-secure electric unlock on 24VDC, and its value is that the lock releases from an access control system or door operator. On an opening with no credential reader and no operator, that capability is unused. Note the function difference as well - the LPM190 is storeroom, where the outside lever stays locked and the key or the panel grants entry, while the L9050BDC is entrance/office.
7) Can the Schlage L9050BDC be used where a Command Access LPM190-M-EU-CH is specified?
Not as a functional substitute, even though both are Grade 1 heavy duty mortise bodies. The L9050BDC is a mechanical entrance/office lock with a disposable SFIC and no electrification. The LPM190-M-EU-CH is a 24VDC fail-secure electric unlock body with a built-in smart module that provides latch-sensing status feedback to the access control panel, and it is offered with or without integrated request-to-exit. If the drawing calls for panel-controlled release, door status monitoring, or a REX signal to an automatic operator, the mechanical lock cannot deliver any of the three. The relationship runs the other way: the LPM190 is designed to drop into Schlage L9000 series trim and standard Type 86 prep, so an existing Schlage mortise opening is exactly where it retrofits.
8) Will the Command Access LPM190 give me latch status back to my access control panel?
Yes. A smart module is built into the lock body and provides latch-sensing status feedback to the panel with no extra hardware, monitoring strike or door position switch to buy and wire. The same module keeps the current draw down. If you also need the panel to see the inside lever being used, order the REX version.
9) Is this mortise lock rated for a high-traffic door that cycles all day?
It is. The LPM190 is a Grade 1 chassis, heavy-duty and continuous duty rated, so it can sit held back for extended periods without overheating. It also auto re-engages if the latch gets pulled out of the held-back position, which is the failure people hit on lobby and corridor doors where someone tugs the door while it is unlocked.
10) What is the difference between a motorized latch retraction mortise lock and a solenoid one?
Motor driven retraction, like the LPM190, pulls the latch with a motor rather than a solenoid coil, which is why it can run on a modest 24VDC supply with 300 foot runs on 18 AWG and share a supply with other locks. Solenoid bodies typically pull a larger inrush. ZenSupply carries both approaches: the SDC 7600 Series is another Grade 1 motorized latch retraction mortise lockset on 24VDC control, and the SDC Selectric 7800 PRO Series is the solenoid controlled route with a vandal resistant clutch. If the concern is abuse on the lever rather than power budget, look at the clutched 7800.
11) What else does ZenSupply sell if I need a storeroom-function electrified mortise lock from a different brand?
Two close peers. The DynaLock EML-1 Series is an electrified mortise lock in storeroom function, the same lock behavior on the opening. The SDC 7600 Series is a Grade 1 motorized latch retraction mortise lockset with 24VDC control, listed for 1-3/4 inch doors, and it is the closest match to what the LPM190 does electrically. The reason to stay with the Command Access LPM190 is the Schlage L9000 retrofit path, since it reuses the existing Type 86 prep and L9000 trim.
12) Can I use this lock with an automatic door operator for an ADA push-button restroom?
That is one of its intended jobs. On a push-button opening the operator has to retract the latch before it swings the door, and the LPM190 does that on a 24VDC signal from the operator or the access panel. Order the REX version for these, so the inside lever also triggers the operator and reports egress. Single-occupancy restrooms and ADA push/pull applications are named applications for it.
13) Does the Command Access LPM190 come with the lever trim and cylinder, or do I order those separately?
The LPM190-M-EU-CH is the electrified mortise lock body, sold to work behind Schlage L9000 series trim. On a retrofit that is the point: you keep the L9000 trim and cylinder already on the door and change out the body. On a new opening you will need to source the L9000 compatible trim and a mortise cylinder to suit your keyway separately.
14) Which electrified mortise locks are available in storeroom function besides the Command Access LPM190?
The DynaLock EML-1, from the EML Series, is an electrified mortise lock in storeroom function. The Command Access LPM190-M-EU-CH is also storeroom, on a heavy-duty Grade 1 chassis, fail-secure at 24VDC, and is field-handable into standard Type 86 prep as a direct Schlage L9000 retrofit. Storeroom means the outside lever is always locked and the latch is retracted by key or by the access control release, so egress from inside is always free - the right function for a supply room, mechanical room, or secured vestibule.
15) What mortise lock should be used on a door subject to abuse or forced lever attacks?
The SDC Selectric 7800 PRO Series is the one built around that exposure - it is a solenoid controlled mortise lock with a vandal resistant clutch, listed for 1-3/4 inch doors, and the clutch is what protects the mechanism when the lever is forced while locked. The Command Access LPM190-M-EU-CH addresses durability differently: it is a heavy-duty Grade 1 continuous duty chassis that auto re-engages if the latch is pulled from the held-back position, aimed at high-cycle openings and automatic operator integration rather than lever attack. Pick by which failure you expect - cycle count or abuse.
How fast can I get the Command Access LPM190-M-EU-CH-24V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Command Access LPM190-M-EU-CH-24V come with a warranty?
Absolutely. The Command Access LPM190-M-EU-CH-24V is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Command Access LPM190-M-EU-CH-24V?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Command Access LPM190-M-EU-CH-24V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!