Command Access MLRK1-TEL Motorized Latch Retraction Kit for Tell 9500, Phoenix Hardware Titan 66 Series & Philadelphia Hardware 9000 Series Exit Device

MLRK1-TEL

Motorized Latch Retraction Kit for Tell 9500, Phoenix Hardware Titan 66 Series & Philadelphia Hardware 9000 Series Exit Device

The new MLRK1-TEL is a practical and cost-effective way to convert a mechanical Tell 9000, Phoenix Titan 66, & Philadelphia Hardware 9000 series device to an electrified latch pullback device. The retrofit kit will maintain all UL listings on the device and for peace of mind is backed by CAT’s 3-year no hassle warranty. The new unit easily hooks onto the back activating bracket and is secured with (2) screws, in a matter of seconds. The only hole you’ll need to drill is for the wire raceway. PTS allows for a smooth post-installation adjustment of the latch/latches. An optional built-in REX switch is available on all units! Last but not least, it features an updated MM4S module with 2 different energy consumption settings from energy conscious to high torque to get the tough jobs done!

Features:

• Next Generation MM4S Smart Module: On board diagnostics with audible feedback for adjustment and power issues
• “PTS”: 5 second electronic adjustment for easy
post installation adjustment
• Electric dogging rated for continuous duty - Auto re-engage if push pad is pulled from dogged position
• Low Current Draw - Field switchable to a “Low Current” or “High Torque” mode
• Up to 300’ wire run with 2-18ga wire - Long wire runs provides installer with convenience of placing the Command locking hardware power supply in a centralized location; i.e. the same closet as the access control panel
• Push-n-Go Pigtail + 8’ cable with Quick Connect for MM4S module to easily connect to power supply lead
• Optional Built-in Request to Exit (REX)
• 3 Year “NO HASSLE” Warranty

Specifications

Voltage:

VOLTAGE RANGE – 24 TO 28 VDC
SYSTEM PROTECTION – UNIT SHUTDOWN WHEN
VOLTAGE EXCEEDS 28VDC
STANDARD - AVERAGE CURRENT PEAK: 900MA,
AVERAGE CURRENT HOLD: 215MA
HIGH TORQUE - AVERAGE CURRENT PEAK: 2A,
AVERAGE CURRENT HOLD: 250MA
PTS ADJUSTMENT – APPROX. 1/4”

Wire Run:

• 300’ with 18ga wire

Product Details:

Box: 10.5” x 3.75”: x 2.5”

Weight: 2 Lbs

15 MASTER PACK:
Weight: 30 lLbs 12.75” x 11.75” x 11”

Cutdown Details: MUST HAVE AT LEAST

• 8-3/4” - LENGTH AFTER PUSHPAD

MLRK1-TEL Cutsheet

Installation Instruction